基于因子分析和聚类分析的江苏十三市环境保护评价研究

本文根据工业废水排放量、工业二氧化硫排放量、工业烟尘排放量、工业废水排放达标率、工业固体废物综合利用率5个指标的统计数据,运用因子分析和聚类分析,对江苏13个市的环境保护状况进行评价,并将其分成5个不同的类别,第1类是苏州,第2类是南京,第3类包括无锡、南通、常州,第4类包括徐州、扬州、泰州、淮安、宿迁,第5类包括盐城、镇江、连云港,然后进一步对各类城市在污染强度和污染控制方面的特征进行分析。最后,分别对每类地区的环境保护提出对策建议。     

中国人类活动源非甲烷挥发性有机物（NMVOC）排放总量及分布

研究了各污染源的NMVOC排放因子,重点分析化工产储源的NMVOC排放因子,估计了1998～2007年中国各地区、各污染源挥发性有机物（NMVOC）排放总量,并研究了各污染源NMVOC各成分的分布特征。研究表明,近年来NMVOC排放总量呈上升趋势,2007年中国人类活动排放NMVOC总量达到2380.24万吨,是1998年的1.8倍。其中固定源燃烧排放958.95万吨（生物质燃料842.27万吨）,交通源478.62万吨,溶剂应用408.23万吨,化工产储源301.11万吨,石油储运和精炼131.84万吨,混杂源101.49万吨。本研究为挥发性有机物（VOC）总量控制提供参考。     

Risk assessment of xenoestrogens in a typical domestic sewage-holding lake in China

Release of domestic sewage leads to accumulation of xenoestrogens in holding waters, especially in closed or semi-enclosed waters such as lakes. In the study, the occurrence, distribution, estrogenic activity and risk of eight xenoestreogens were evaluated in Lake Donghu, China. Nonylphenol (NP), octylphenol (OP), and bisphenol A (BPA) were identified as the main xenoestrogens ranging from tens of ng L⁻¹ (in the surface water) or ng g⁻¹ dw (in the suspended particles and sediment) to tens of μg L⁻¹ or μg g⁻¹ dw. The sum of 17β-estradiol equivalents (∑EEQs) ranged from 0.32 to 45.02 ng L⁻¹ in the surface water, 0.53 to 71.86 ng g⁻¹ dw in the suspended particles, and 0.09 to 24.73 ng g⁻¹ dw in the sediment. Diethylstilbestrol (DES) was determined as the main contributor to ∑EEQs followed by NP. The risk assessment showed a higher risk in the surface water than in the suspended particles and sediment in such domestic sewage-holding lake.     

Detection of transfluthrin and metofluthrin genotoxicity in the ST cross of the Drosophila Wing Spot Test

In this study, different concentrations of transfluthrin and metofluthrin have been assayed for genotoxicity by using the Wing Spot Test on Drosophila melanogaster. Standard cross was used in the experiment. Third-instar larvae that were trans-heterozygous for the two genetic markers mwh and flr³ were treated at different concentrations (0.0103 mg mL⁻¹, 0.103 mg mL⁻¹ for transfluthrin and 6 μg mL⁻¹, 60 μg mL⁻¹ for metofluthrin) of the test compounds. Feeding ended with pupation of the surviving larvae and the genetic changes induced in somatic cells of the wing’s imaginal discs lead to the formation of mutant clones on the wing blade. Results indicated that two experimental concentrations of transfluthrin and 60 μg mL⁻¹ metofluthrin showed mutagenic and recombinogenic effects in both the marker-heterozygous (MH) flies and the balancer-heterozygous (BH) flies.     

Quantification of the interactions between Ca,Hg and extracellular polymeric substances (EPS) of sludge

The interactions between metals (Ca²⁺ and Hg²⁺) and extracellular polymeric substances (EPS) extracted from the aerobic and anaerobic sludge in wastewater treatment reactors were investigated using a combination of zeta potential measurement and 3-dimensional excitation–emission matrix (EEM) fluorescence spectroscopy with parallel factor (PARAFAC) analysis. Results show that Ca²⁺ had no substantial effects on the EEM fluorescence spectra of the EPS, but their zeta potentials increased with the increasing Ca²⁺ dosage. However, Hg²⁺ had a significant effect on the EEM fluorescence spectra of the EPS, while their zeta potentials seemed not to be affected by the dose of Hg²⁺. The interactions between Hg²⁺ and EPS were elucidated using the fluorescence quenching with PARAFAC analysis, while the interactions between Ca²⁺ and EPS were evaluated by the zeta potential technique. The binding constants for Hg²⁺ and EPS were two orders of magnitude higher than those for Ca²⁺ and EPS, suggesting that the binding mechanisms between Ca²⁺ and EPS were different from those between Hg²⁺ and EPS. The results might be useful for understanding the roles of EPS in bacterial self-protection against heavy metals and the aggregate formation mechanisms through ionic bridging interactions.     

四环素高效降解酵母菌Trichosporon mycotoxinivorans XPY-10降解特性

Trichosporon mycotoxinivorans XPY-10是一株分离自抗生素制药厂的高效四环素降解酵母菌。为了建立该菌株降解四环素的适宜条件,分别研究了碳源、有机氮源、金属离子等营养物质及初始底物浓度、接种量、pH、温度、装液量、摇床转速等理化因素对菌体生长及四环素降解效率的影响。结果表明,菌株XPY-10生长的最适碳源和氮源分别为蔗糖和蛋白胨。在含有0．05％FeSO4的培养基中,菌株XPY—10降解四环素的适宜条件为：接种量2％,pH8,温度3422,装液量100mL（250mL三角瓶）,摇床转速180r／min。在此条件下,菌株XPY—10在7d内对初始浓度为600mg／L的四环素降解率为83．63％。本菌株对养殖废水及制药废水中四环素的污染治理有一定的应用前景。     

我国电子废物污染现状及环保利用浅析

通过分析与电子废物回收处理密切联系的工艺技术、规划管理和各种外部环境等因素,剖析我国电子废物处理产业面临的障碍,并提出解决建议。     

电源变压器温升试验中（绕组法）的影响因素及不确定度的评估

本文中探讨的是根据绕组法计算电源变压器绕组温升的试验方法,以及对整个试验过程中环境、仪器设备、仪表、人为因素所引起的误差等对最终试验结果的影响,并对其测量不确定度进行评估。     

Laboratory longitudinal diffusion tests: 2. Parameter estimation by inverse analysis

This study focuses on the verification of test interpretations for different state analyses of diffusion experiments. Part 1 of this study identified that steady, quasi-steady and equilibrium state analyses for the through- and in-diffusion tests with solution reservoirs are generally feasible where the tracer is not highly sorptive. In Part 2 we investigate parameter identifiability in transient-state analysis of reservoir concentration variation using a numerical approach. For increased generality, the analytical models, objective functions and Jacobian matrix necessary for inverse analysis of transient-state data are reformulated using unified dimensionless parameters. In these dimensionless forms, the number of unknown parameters is reduced and a single dimensionless parameter represents the sorption property. The dimensionless objective functions are evaluated for individual test methods and parameter identifiability is discussed in relation to the sorption property. The effects of multiple minima and measurement error on parameter identifiability are also investigated. The main findings are that inverse problems for inlet and outlet reservoir concentration analyses are generally unstable and well-posed, respectively. Where the tracer is sorptive, the inverse problem for the inlet reservoir concentration analysis may have multiple minima. When insufficient measurement data is collected, multiple solutions may result and this should be taken into consideration when inversely analyzing data including that of inlet reservoir concentration. Verification of test interpretation by cross-checking different state analyses is feasible where the tracer is not highly sorptive. In an actual experiment, test interpretation validity is demonstrated through consistency between theory and practice for different state analyses.     

确定压力容器安全系数原则

压力容器安全系数与材料参数紧密相关,确定材料许用应力值时,需要同时考虑材料抗拉强度和屈服强度更为合理;奥氏体不锈钢材料具有非常好的应变强化能力和韧性,为充分发挥奥氏体不锈钢材料优良性能,选取奥氏体不锈钢材料许用应力值时,需要特殊考虑。压力容器安全系数的选取建立在经验基础上,在保障压力容器安全性前提条件下,为节省材料和降低成本,随着理论研究深入和科学实验的进步,压力容器安全系数有所降低,这是科学设计和实用成功经验结合的结果。