影响郑州市大气TSP浓度诸因素的灰色关联分析与弹性分析

根据郑州市大气TSP浓度的监测数据以及相关影响因素数据，运用灰色系统理论的关联分析方法，得出了影响TSP浓度的主要因素，并通过建立灰色GM（1，N）模型，运用弹性分析理论分析了各影因素对TSP浓度的贡献大小。经过两者分析，提出了控制和治理TSP污染的对策。     

农药污染环境质量评价

本文根据计算排毒系数的方法确定了主要污染源和污染物,又根据食入、饮进、呼吸等量建立了权重系统,由此而计算了中国不同农业区域的污染指数。结果表明,重污染区集中在长江、黄河流域的粮、棉产区,而且我国农业环境中BHC、DDT污染程度是向南或向北逐渐减弱。     

上海北郊大气挥发性有机物(VOCs)变化特征及来源解析

2019年1月1日到10月31日期间在上海北部郊区,采用在线气相色谱仪对58种VOCs定量检测,分析了大气VOCs组成、季节变化特征和日变化规律,并利用最大增量反应活性(MIR)估算了VOCs的臭氧生成潜势(OFP),应用因子分析法对VOCs来源进行了解析。结果表明,上海大气总VOCs体积浓度为25.79×10-9,其中烷烃占比63.2%,烯烃占比11.6%,芳香烃占比19.8%,炔烃占比5.4%。总VOCs体积浓度呈现夏季高,秋季低的季节变化特征。大气臭氧生成潜势为76.99×10-9,烷烃贡献率为22.1%,烯烃为37.5%,芳香烃为38.7%,炔烃为1.7%。VOCs特征物比值(V(TVOC)/V(NO_x)和T/B比值)法表明观测点为VOCs控制区,受周边工业区源和交通源影响。大气VOCs主要来源为机动车排放、工厂生产、燃料燃烧、工业溶剂挥发及天然源。     

环境资源约束下中国工业绿色全要素水资源效率研究

通过构建RAM-SFA-RAM三阶段工业绿色全要素水资源效率测度模型，对其不同层面的效率值进行多维测度与比较分析，并利用空间Tobit模型对工业绿色全要素水资源效率的驱动机制进行实证检验.效率测度结果表明，环境因素与统计噪音是效率值计算中不可忽视的重要影响因素；全国样本的效率值在2000~2017年期间总体变化趋势是以持续上升为主，但距离理想发展状态还存在较大差距，具体阶段上可划分为“稳增期”、“振落期”和“提速期”；区域层面的检验中，东部效率具有较为显著的领先优势，而中部和东北部效率差异性相对较小，其变化曲线存在明显的“交互性”现象，西部则整体效率偏低；主要经济带的检验中，京津冀地区的工业绿色全要素水资源效率整体上要高于泛珠三角和泛长三角地区.驱动机制检验表明，基于全国样本维度的水资源禀赋、企业技术创新、用水结构和环境规制对工业绿色全要素水资源效率具有正向促进作用，而产业结构、城镇化率表现为负向抑制效应；在区域样本检验中，各影响要素在不同区域之间所呈现出的作用效果存在一定差异性，但产业结构调整、城镇化水平等应引起重视，不同区域需要依据其实际特点采取针对性的改进措施.     

影响滇池入湖污染物总量变化的主要因素分析

分析了滇池入湖污染物总量变化情况及主要影响因素，得出结论：生活污染源是流域污染控制的重点；要完善城市排水管网系统，最大限度地发挥污水处理厂的作用；开展城市卫生系统改造研究，就地处理资源化利用，可从根本上减少污染物入湖量。     

曝气生物滤池处理化学药剂废水的试验研究及影响因素分析

探讨了对于难处理的化学药剂废水曝气生物滤池处理的可行性，分析了影响曝气生物滤池处理效果的若干因素，试验结果表明，废水的温度、pH值、气水比及水力停留时间等是影响滤池处理效果的重要因素，控制废水水温在15℃以是，pH在7．3．8．3之间，气水比10：1，水力停留时间大于10h，可以取得较为理想的处理效果，出水CODcr，和BOD5的去除率可分别达到58％和90％以上。     

Criteria for the evaluation of dioxins in the environment

In FRG and other countries unequivocal criteria for the limitation of dioxins (PCDD's/PCDF's) in food like vegetables and fruits are lacking. These have to be directly associated with the limitation of dioxins in the soil and the deposition of particulate matter as the two main pathways for plant contamination. Based on recent investigations in the vicinity of cable-waste incinerators in Northrhine-Westphalia with comparatively high contents of dioxins in garden plants and soils and other sources of dioxins, considerations are given for the establishment of the criteria urgently needed.     

高位铁皮水箱供水质量及影响因素

我们于１９９５年３月￣４月调查了武汉市高位铁皮水箱的供水质量。结果表明：高层住宅水箱近年虽曾清洗消毒，但高层用户龙头水及水箱水中游离性全氯未达标比例较大，分别为７３．３％和６６．７％。个别底层住户水样中铁超标。高位水箱水样中细菌总数超标比例为２０％。反映了高层住宅二次供水中在水的输送、贮存过程中有二次污染存在。经水样监测指标相关性和灰色关联性分析，认为游离性余氯可作为常规监测高层住宅二次供水质量的     

Transport modeling of copper and cadmium with linear and nonlinear retardation factors

The predictive accuracy of using the one-dimensional advection–dispersion equation to evaluate the fate and transport of solute in a soil column is usually dependent on the proper determination of chemical retardation factors. Typically, the distribution coefficient (K_d) obtained by fitting the linear sorption isotherm has been extensively used to consider general geochemical reactions on solute transport in a low-concentration range. However, the linear distribution coefficient cannot be adequately utilized to describe the solute fate at a higher concentration level. This study employed the nonlinear equilibrium-controlled sorption parameters to determine the retardation factor used in column leaching experiments. Copper and cadmium transportation in a lateritic silty-clay soil column was examined. Through the explicit finite-difference calculations with a third-order total-variation-diminishing (TVD) numerical solution scheme, all results of the theoretical copper and cadmium breakthrough curves (BTCs) simulated by using the Freundlich nonlinear retardation factors revealed good agreement with the experimental observations.     

Characteristics of molecular weight distribution of dissolved organic matter in bromide-containing water and disinfection by-product formation properties during treatment processes

The characteristics of dissolved organic matter (DOM) and bromide ion concentration have a significant influence on the formation of disinfection by-products (DBPs). In order to identify the main DBP precursors, DOM was divided into five fractions based on molecular weight (MW), trihalomethane formation potential and haloacetic acid formation potential were determined for fractions, and the change in contents of different fractions and total DBPs during treatment processes (pre-chlorination, coagulation, sand filtration, disinfection) were studied. Moreover, the relationship between bromide concentration and DBP generation characteristics in processes was also analyzed. The results showed that the main DBP precursors were the fraction with MW < 1 kDa and fraction with MW 3−10 kDa, and the DBP''s generation ability of lower molecular weight DOM (< 10 kDa) was higher than that of higher molecular weight DOM. During different processes, pre-chlorination and disinfection had limited effect on removing organics but could alter the MW distribution, and coagulation and filtration could effectively remove organics with higher MW. For DBPs, trihalomethanes (THMs) were mainly generated in pre-chlorination and disinfection, while haloacetic acids (HAAs) were mostly generated during pre-chlorination; coagulation and sand filtration had little effect on THMs but resulted in a slight removal of HAAs. In addition, the results of ANOVA tests suggested that molecular sizes and treatment processes have significant influence on DBP formation. With increasing bromide concentration, the brominated DBPs significantly increased, but the bromine incorporation factor in the processes was basically consistent at each concentration.