南水北调丹江口库区土壤中微塑料分布特征及风险评估

为探究丹江口库区土壤中微塑料赋存特征及影响因素,通过对果园、旱地、水田和湿地进行土壤样品采集,利用密度分选、显微镜观察和拉曼光谱仪测定等方法对土壤中微塑料进行鉴定.结果表明,研究区采集的64个样本均有微塑料检出,丰度范围为645~15161 n·kg^-1.空间分布上,库尾高于库中和库首,且表层土壤（0~20 cm）中微塑料的丰度明显低于下层土壤（20~40 cm）.微塑料主要类型为聚丙烯（26.4%）和聚酰胺（20.2%）,粒径主要集中在50~500 μm之间（75%）,常见形状为碎片状（66.2%）.相关性分析显示,土壤微塑料丰度与土地利用、距水面和住宅的距离、人口密度和土壤性状密切相关.从微塑料污染风险来看,72.1%区域微塑料聚合物污染指数处于Ⅲ级和Ⅳ级,丹江口库区存在一定的微塑料污染风险.研究结果可为微塑料风险评估提供支撑.     

基于种群、功能群对比分析洞庭湖浮游植物群落驱动因素及水质评价

浮游植物是水生态系统中最重要的组成部分,因其对水环境变化敏感而常被用于指示水环境状态,但其对环境的响应受分类方法的影响.为了解洞庭湖浮游植物种群(门、属)和功能群(FG)两种分类法对环境的驱动响应特征和适用性,于2019年3～12月分水期对该湖共进行了4次采样,比较分析了浮游植物种群和功能群的分布特征及其与环境因子的响应关系,并对比了TLI指数、 Shannon-Wiener指数、Q指数等评价方法在洞庭湖的适用性.结果表明,洞庭湖共检出浮游植物6门61属,可划分为23个功能群和9个优势功能群,功能群演替趋势为P/MP/D(3月)■月)■月)■(12月).层次分割结果表明,洞庭湖浮游植物的种群分布与变化受环境因子的驱动大于空间驱动;影响浮游植物种群和功能群的主要环境因子为水温(WT)、高锰酸盐指数、溶解氧(DO)、电导率(Cond)、水位(WL)和总磷(TP),环境因子对两者的独立解释性排序相差不大.RDA分析表明,浮游植物功能群对环境因子的响应要优于浮游植物种群.综合对比分析发现,利用Q指数进行水质评价在洞庭湖水体有较好的适用性.     

An analytical platform for cumulative impact assessment based on multiple futures: the impact of petroleum drilling and forest harvesting on moose (Alces alces) and marten (Martes americana) habitats in northeastern British Columbia

The combined influence on the environment of all projects occurring in a single area is evaluated through cumulative impact assessments (CIA), which consider the consequences of multiple projects, each insignificant on its own, yet important when evaluated collectively. Traditionally, future human activities are included in CIA using an analytical platform, commonly based on complex models that supply precise predictions but with reduced accuracy. To compensate for the lack of accuracy in current CIA approaches, we propose a shift in the paradigm governing CIA. The paradigm shift involves a change in the focus of CIA investigations from the detailed analysis of one unlikely future to the identification of the patterns describing multiple potential future changes in the environment. To illustrate the approach, a set of 144 possible and equally likely futures were developed that aimed to identify the potential impacts of forest harvesting and petroleum drilling on the habitat suitability of moose and marten in northeast British Columbia, Canada. The evolution of two measures of habitat suitability (average habitat suitability index and surface of the stands with habitat suitability index >0.5) revealed that the human activities could induce cycles in the habitat dynamics of moose and marten. The planning period of 100 years was separated into three distinct periods following a sinusoidal pattern (i.e., increase - constant - decrease in the habitat suitability measures). The attributes that could induce significant changes in the assessment of environment are the choice of harvesting age and species.     

国家环境保护模范城市现状分析及展望

改革开放以来,在我国经济快速发展的同时,产生了巨大的环境问题,为此,原国家环保总局审时度势,开展了创建国家环境保护模范城市的活动。本文对“创模”考核指标的调整情况进行概括,从总体情况、所属行政区、所属行政区级别、面积4个方面对目前“环保模范”城市状况进行了深入地分析,并对日后的“创模”工作进行了展望。     

企业粉尘职业危害监督量化分级管理指标体系的筛选

目的是建立粉尘职业卫生监督量化分级管理指标体系,为企业的粉尘职业危害防治提供依据。对象与方法是以59名国内职业卫生领域专家为研究对象。通过编制的调查表,让专家依据各指标的重要程度打分。国内职业卫生领域符合条件的专家以电子邮件方式发送调查问卷70份,收回调查表59份。利用变异系数法,计算每一指标的平均分、变异系数和满分比,评价信度和效度,最终筛选确定粉尘企业职业危害监督量化分级管理的指标体系。结果如下,59名专家积极系数84.3%,8项一级指标和69项二级指标的平均值均超过2.5,变异系数均在50%以下,满分比均介于0-1之间,8项一级指标的克朗巴赫值均大于0.6,相关系数介于0.249-0.705之间。除预防措施和粉尘危害项目存在的问题外,其余均具有统计学意义。结论为企业粉尘职业危害监督量化分级管理指标体系经筛选包括8项一级指标和69项二级指标。     

基于GA优化算法的平遥县大气环境质量评价研究

本文以平遥县城及周边区域环境空气质量监测结果为依据,采用具有全局优化的遗传算法（GA）对平遥县及周边区域大气环境质量污染现状进行评价。用大气污染危害指数的普适公式和参数优化后的污染危害指数公式确定污染危害指数的取值范围与评价级别之间的对应关系,由此得出较符合平遥县及周边区域实际的评价结果,同时针对具体情况对此结果进行简单的分析。     

中部六省区制造业地理集中度分析

中部六省区在我国经济社会发展格局中占据重要地位.采用Eillison和Glaser设计的公式计算了中部六省区制造业17个行业从2007-2010年间的地理集中指数.通过对地理集中指数的分析发现,中部六省区制造业存在“小范围小幅度集中,大范围大幅度扩散”现象,且集中主要存在于化学纤维制造业、化学原料及化学制品制造业和专用设备制造业这些技术和资本密集型行业.从制造业17个行业扩散大于集中的现象可见,中部六省区目前还处于聚集效应的下降阶段.     

河北省县域可持续发展评价指标体系的建立与应用研究

以可持续发展相关理论为基础,利用系统工程的理论和方法建立了河北省县域可持续发展指标体系及其评价标准,并在全省范围应用,对全省136个县(市)可持续发展能力做出了评价。结合评价结果,阐述了河北省县域可持续发展能力的特征,提出了河北省县域可持续发展的方向和思路。     

“十一五”期间辽河铁岭段及支流水质变化趋势

用Daniel的Spearman秩相关系数法对辽河铁岭段及支流在"十一五"期间水质进行趋势检验,确定各监测断面超标污染物及综合污染指数上升或下降趋势的显著性,结合铁岭市"十一五"期间的污染治理措施,分析各项污染物产生变化的原因,提出了今后的工作方向,为进一步加强环境管理提供了依据。     

Using simulation to explore the functional relationships of terrestrial carnivore population indices

Population indices based on visits to detection stations commonly are used to monitor wildlife populations. Inferences about populations are based on 1 of 2 measures: (1) change in the proportion of stations visited at least once or (2) change in the cumulative number of visits by unique individuals. The functional relationships between index responses and population density is poorly understood and can lead to misinterpretation of index data when an incorrect functional relationship (e.g. linear) is assumed. We created a flexible simulation environment to study the response of detection-based population indices under a wide variety of conditions meant to reflect species life history and study design. Proportional indices exhibited non-linear saturating responses to changes in population density while cumulative indices responded linearly. Shapes of responses were functions of home range sizes, individual detection probabilities, and spatial arrangement of animals and sampling stations. Non-linear relationships of proportional indices lead to under-estimation of mean population density when data are aggregated from multiple detection stations deployed in a heterogeneous landscape. Cumulative indices have significant statistical advantages over proportional indices including smaller sample sizes required to detect density change, linearity, consistent index responses across a wide range of densities, and ability to aggregate data to meet minimum sample size requirements. Our simulation provides a flexible tool for the interpretation of station-based population indices.