改性木屑吸附剂对印染废水的脱色性能研究

本文介绍了以廉价易得的杨树木屑为原料，经环氧氯丙烷交联，制备的一种新的生物吸附剂，研究各种反应因素（氢氧化钠浓度、环氧氯丙烷用量、反应温度、木屑粒径等）对反应过程和吸附剂性能的影响，检验了其对品红及孔雀石绿在不同条件下的吸附性能，并探讨了它的吸附动力学曲线和再生性能。     

US/Fenton试剂协同处理焦化废水的研究

采用US (超声波)协同Fenton试剂氧化法处理焦化废水,考察了H2O2投加量、Fe2 投加量、废水的pH、反应时间和超声波功率对处理效果的影响,确定了最佳工艺条件.结果表明,在H2O2投加量7.0 g/L;Fe2 投加量500 mg/L;pH=3.0; 反应时间 40 min; 超声波功率 600 W 的条件下,COD、NH3-N、CN-和色度的去除率分别达95.8%、71.3%、69.5%和75.2%,出水COD降至41.0 mg/L.在相同条件下,US/Fenton试剂协同法的处理效率比单独Fenton试剂氧化法的处理效率提高了约20%,且反应时间显著缩短.     

高COD焦化废水的吸附研究

研究了粉末活性炭对焦化废水COD的去除效率.结果表明,在pH值为6左右时,向50 mL焦化废水中投加1 g粉末活性炭,吸附1 h,COD去除率可达98.5%.     

纳米二氧化钛处理含砷废水的研究

研究了无机纳米材料二氧化钛对含砷废水的处理效果.实验主要从纳米二氧化钛的溶液pH值、不同投加量、实验温度、吸附搅拌时间、静置时间等方面对除砷效率进行了研究,并通过模拟水样和实际水样的对比,分析了纳米二氧化钛处理含砷废水的实际可行性.     

钢铁企业总排口废水回用新工艺应用

就当前国内几个典型的钢铁企业总排口废水水质特性作了分析,探索钢铁企业废水回收利用的工艺路线,提出在吸收国外新技术的基础上研究开发出符合国情的新工艺技术.     

EFFICIENCY PROBLEMS FROM USER FEES IN MUNICIPAL WASTEWATER TREATMENT1

ABSTRACT: The Environmental Protection Agency administers a construction grant program to encourage abatement of wastewater pollution by sharing with municipalities the costs of wastewater treatment facilities. The enabling legislation (P.L. 92–500) specifies that EPA's cost share will be 75% of construction costs. It further requires municipalities to collect user fees from industrial users of the facilities to repay that part of the federal grant allocable to the treatment of industrial wastewater. The municipality must return half of the user fees collected to the U.S. Treasury; the municipality is allowed to retain the remaining half. Retention by municipalities of these user fees lowers their effective cost shares and results in the following consequences: (1) a bias for municipalities to select certain kinds of abatement techniques regardless of whether or not they are the least-cost techniques from the national perspective; (2) a bias for municipalities to select larger-than-optimal scales of abatement facilities; (3) a hidden federal subsidy to industry; and (4) grants that favor industrial communities. This article examines the legislative and regulatory requirements for user charges, derives the algebraic expressions for calculating the real federal, municipal, and industrial cost shares with user fees; computes municipal cost shares for selected values of the determinant factors; evaluates efficiency and other consequences of current user fee arrangements; and concludes that the efficiency distortions brought about by the impacts of user fees on cost sharing could be eliminated by requiring that all user fees collected from industry against the federal cost share be returned to the U.S. Treasury.     

皮革铬鞣废水回收利用中铬渣的铬量测定

本文研究了皮革铬鞣废水中铬的定性特征曲线。利用吸光度加合定律对大量实测数据进行统计处理。建立测定铬的实验室校准直线方程，相关系数γ＝０．９９６０．以此作为测定铬鞣废水及回收铬渣中铬量的实验室回归直线方程。并对本法的可靠性进行研究，结果令人满意。本法不仅大大简化了铬量测定的步骤．而且在提高分析效率的同时获得同等的检测结果。     

考虑油滴碰撞聚结的斜板除油过程模拟

考虑离散油滴在油田废水除油过程中发生的油滴碰撞聚结现象,模拟得出斜板除油器内全部油滴的动态信息,用于斜板除油器除油效率的计算.对矩形同向流斜板除油过程的模拟研究表明:油滴的碰撞聚结会增加斜板除油的效率;当废水的原始含油浓度增大时,斜板除油的效率会增大,碰撞聚结对除油效率提高的影响也越大;废水流动速度提高及斜板的倾斜角度增加均会使斜板的除油效率降低,但此时油滴碰撞聚结对除油效率的影响仍很明显.     

邯郸市沁河水污染治理方案

本文对邯郸市沁河水污染现状进行了调查分析，总结了城市内河治理经验，通过方案比较，推荐“清淤，护坡，建坝，分质截污，邯钢废水混凝沉淀处理”为沁河治理方案。     

焦化废水生物脱氮半生产性试验启动研究

通过试验研究,探索了焦化废水生物脱氮半生产性启动条件,指出了顺利启动的关键技术是适宜的接种污泥及必须提供的环境条件。