水固液微界面氧化还原反应过程与污染物控制研究

本文介绍了3个反应体系,包括铁锰复合氧化物氧化吸附除砷体系、铁氧化物包覆零价铁光芬顿催化和负载型多价态锰氧化物臭氧催化体系,通过固液微界面不同的氧化还原反应,实现了对水中砷和难降解有机污染物的高效去除.重点介绍了不同氧化还原反应对污染物转移转化的作用机制,说明了水体中固液微界面氧化还原反应,对污染物的转移转化起着重要作用.     

土壤中硫的形态分析及其测定方法研究进展

本文对土壤中硫的形态分析与测定方法,从无机硫,有机硫,总硫,以及硫的系统分析方法,硫的检测几个方面进行了综述,对各种方法进行了客观的评价,指出了尚待于解决的问题,并对今后的研究进行了展望。     

催化湿式氧化处理造纸废水的研究

以过渡金属氧化物CuO为活性组分,采用催化湿式氧化法处理造纸废水,考察Cu负载量、催化剂用量、反应温度对废水COD去除率的影响。结果表明:固定氧气分压在2.5MPa和反应时间3h,催化剂用量为3g,Cu负载量为4%,反应温度为220℃,500mL浓度为3250mg/L造纸废水的COD去除率为90%,色度去除率为89%,pH值由9.6变为7.8。另外,对催化剂进行再生处理和稳定性测试。结果表明:450℃下活化3h,在上述相同反应条件下,对原废水的COD去除率降低为88%,重复使用9次后对废水的COD去除率仍能保持在85%左右。     

猪场废水厌氧氨氧化脱氮的短程硝化反硝化预处理研究

在常温(13～20℃)、不调节pH的条件下,采用短程硝化反硝化预处理低C/N（2左右）猪场废水,考察了反硝化与亚硝化过程,并以经过短程硝化反硝化预处理的猪场废水为进水,分析了厌氧氨氧化的脱氮效果.结果表明,采用短程硝化反硝化预处理低C/N猪场废水,可以达到去除部分COD、部分脱氮、控制出水氨氮和亚硝态氮浓度之比在1∶1左右、pH在7.5～8.0左右的目的,为厌氧氨氧化创造了进水条件,全程COD和总氮平均去除率分别为64.3%和49.1%;经过短程硝化反硝化预处理的猪场废水,其厌氧氨氧化脱氮效果稳定,氨氮、亚硝态氮、总氮的平均去除率分别为91.8%、99.3%、84.1%.     

长江流域常量元素的分布特征

2003年4月到5月对长江干流及主要支流河水中常量元素（Ca ²⁺,K⁺,Na⁺,Mg²⁺,Cl^-,SO^2-₄及碱度）进行了测定,并对常量元素的含量及影响因素进行了研究。结果表明,长江阳离子以钙为主,占阳离子总量的40%~80%;而阴离子主要为HCO^-₃,占阴离子总量的60%~90%;阴阳离子含量顺序为HCO^-₃>SO^2-₄>Cl^-,Ca ²⁺>Na⁺ >Mg ²⁺>K⁺。长江干流及主要支流河水的常量离子主要来自于岩石的风化,主要受碳酸盐类溶解的控制,硅酸盐类的风化过程较弱。而大气沉降的影响很小,只有SO^2-₄受大气沉降影响较大。长江干流的Na⁺、Mg²⁺、Ca²⁺、HCO^-₃和Cl^-主要来自于上游,下游只是对上游的简单稀释,而没有额外来源。与世界上其它大河相比,长江的常量离子浓度处于较高的水平;温带地区的河流河水中常量离子的含量常处于较高的水平;热带地区的河流河水中常量离子的含量相对较低。     

Experimental analysis of radiographer exposure to the static field from a 1.5-T magnetic resonance imaging machine

Introduction. This study measures the exposure of occupational therapists from a 1.5-T magnetic resonance imaging (MRI) machine. Method. A total of 14 time-series on each of the chest, head and hand were taken before and after different MRI procedures. The peak values were noted in each case together with an average of all data recorded in the time-series. Results. The highest exposure recorded was observed on the hand, followed by the head and the chest. The overall maximum exposure (1479.40?mT) recorded was observed on the hand during a change of coil. It was also observed that the recorded exposure of experienced radiographers working in the MRI environment was less than that of junior staff due to different practices. Conclusion. This study is of significant importance in Malta since it is the first conducted in a MRI environment, especially because the results were compared with limits imposed by EU Directive 2013/35/EU which has to be implemented by July 2016.     

Quantitative assessment in safety reports of the consequences from the detonation of solid explosives

Safety reports are mandatory documents in member states of European Union whenever any threshold limits of amounts of either stored or processed hazardous substances are exceeded. After a short introduction to EU Seveso Directives on major-accident hazards involving dangerous substances and to the transposition and implementation by member states, with a brief comment on last 2012/18/EU Directive (also known as Seveso III directive), the paper focuses on drafting of safety reports for industrial activities involving solid explosives. Specifically, the quantitative assessment of consequences from detonation is tackled respect to the side-on overpressure and the debris production. Both direct and inverse problems are illustrated to determine respectively the overpressure value at a given distance, and the explosive amount that allows respecting the regulations. Their solution is based on either analytic or numerical techniques and being based on recent scientific publications on the matter either evaluates or zeroes nonlinear algebraic equations. The availability of these equations avoids grounding the consequences assessment on diagrams and nomograms that otherwise would lead to interpretation and usage errors besides avoiding the automatic solution of the inverse problem. The paper focuses also on details such as embankment, crater, munitions, rocket propellant, building structure, and wall material that, at different levels, play a role in the assessment of detonation consequences. A discussion on debris formation, the available literature, and the evaluation of the impact probability of fragments on both fixed and moving targets closes the paper.     

医疗保健行业中的纳米材料：职业风险和预防

欧洲职业健康安全署近期发布电子纪要,解释了保健行业工作者在他们工作场所的日常活动中如何与纳米材料发生可能的接触,并提供了预防潜在接触可以采取的措施。这些措施包括国家层面的法律监管、消除与替代、工程控制、管理措施以及个体防护装备（PPE）。作者特编译此文,为国内相关领域提供参考。     

Ni/Fe二元金属在氯代有机物污染治理中的应用

对Ni/Fe二元金属表面特性、在氯代有机物还原脱氯中的应用以及还原机理的研究概况进行了综述,并讨论了实际应用中存在的问题和发展前景.     

影响脱硫塔性能的因素分析与研究

湿法烟气脱硫是成熟且具有较好发展前景的工艺,其中关键是对脱硫塔的选择及通过各项参数的控制达到良好的脱硫效率.通过对脱硫塔酸碱度(PH)、气液比(L/G)、流场特性、结垢等各种性能进行分析研究,对脱硫塔的选择和实际运行具有一定的指导意义.