The use of respirometric measurements to determine the toxicity of textile dyes in aqueous solution and after oxidative decolourisation processes

Selected results from the degradation of reactive-dye hydrolysates after UV irradiation, ozonation and sodium peroxodisulphate (NaPS) treatment are presented. Reactive dyes with representative chromophores and anchor groups were chosen for the research project. Different stages of oxidative decolourisation were examined and determined by water parameters for biological degradation (BOD). The paper focuses on toxicity tests with Pseudomonas putida to consider whether the oxidative treatments result in products with a risk for the environment. Tests were performed with the AQUALYTIC^® Sensomat System, which measures biological oxygen demand (BOD). It was determined that the chosen oxidative treatments had as a rule no bearing on respiration of P. putida. Experiments with hydrolysates after short-term UV irradiation resulted in a slightly increased but not long-lasting toxicity in comparison with treatments with ozone or NaPS. Toxic effects were found in tests with hydrolysates of metalliferous dyes. During oxidative treatment, metals were liberated from the chromophores. This did cause complete inhibition of respiration of P. putida. Dye Blue E, a member of a dye class with chlorotriazine anchor groups, was itself found to be toxic, caused by the reactivity of the anchor group. The hydrolysate is only of minor toxicity.     

活性炭纤维对活性染料的吸附动力学研究

研究了活性炭纤维从水溶液中吸附4种活性染料（活性艳红K-2BP、活性翠蓝KN-G、活性金黄K-3RP、活性黑KN-B）的吸附特性,从动力学角度探讨了吸附机理.结果表明,活性炭纤维对4种染料的平衡吸附量q_e均随着初始浓度和温度的增加而升高,相同条件下,q_e的大小顺序为：活性艳红＞活性金黄＞活性黑＞活性翠蓝.吸附过程符合伪二级吸附速率方程,染料分子的空间结构、大小和极性是影响初始吸附速率的主要因素.活性炭纤维对4种染料的吸附活化能都比较低,依次为16 .42、3 .56、5 .21和26 .38 kJ·mol^-1,说明吸附过程以物理吸附为主.     

偶氮染料4BS光解动力学和总氮脱除的初步研究

采用单独紫外光氧化降解偶氮染料直接耐酸大红(4BS),研究了不同因素对4BS光解效果的影响,并初步考察了光解对4BS溶液总氮的去除效果. 结果表明,单独紫外光氧化法对4BS及溶液中的总氮有一定的去除效果. 在非强碱性条件下,4BS的光解过程符合准一级反应动力学模型. 速率常数随紫外光强的增强而增大,并且与初始ρ(4BS)呈负相关关系. 溶液pH是影响光解反应的重要因素,速率常数随pH升高而增加显著,强碱性条件下光解速率最快. 光解对溶液中总氮的去除分为三步,含氮结构的发色基团易吸收紫外光,在反应初期被降解而生成气态含氮物,生成的中间产物比较稳定,需要经过一段时间的能量积累才能继续降解,从而总氮的去除率再次升高.      

我国纺织工业建设项目清洁生产评价要点探析

结合国际纺织工业“生态化”发展的态势以及我国纺织化工业发展特点,考虑建设项目环境评价对清洁生产的要求,提出了我国纺织工业建设项目清洁生产评价的要点。从厂址、产品、工艺、设备、资源利用、环境安全等角度构建纺织工业建设项目清洁生产评价指标体系。     

纺织品综合色牢度试验方法标准的研究

色牢度是有色纺织品的重要考核指标，单项色牢度往往不能真实反映出纺织品在实际使用时的真实牢度，有时各种单项牢度指标都很好，而在实际穿着或使用时仍会出现问题。本方法标准是在试验室中人工模拟有色纺织品在人体穿用及自然气候等复杂条件下，于短期内（2-4天），可预测出在不同纬度地区实际穿着一定时间后颜色的变化情况。本方法不仅适用于军用纺织品，同样也适用于民用所有有色纺织品。可依据用户的不同要求，确定试验周期，来反映某一地区一个阶段后颜色变化的真实情况。还可为纺织印染行业的工艺设计及染料选择，提供综合，快速，准确，科学有效的检测方法。     

Adsorption of dyes onto activated carbon prepared from olive stones

Activated carbon was produced from olive stones（OSAC） by a physical process in two steps. The adsorption character of this activated carbon was tested on three colour dyes molecules in aqueous solution： Methylene blue（MB）, Rhodamine B（RB） and Congo Red（CR）. The adsorption equilibrium was studied through isotherms construction at 30℃, which were well described by Langmuir model. The adsorption capacity on the OSAC was estimated to be 303 mg/g, 217 mg/g and 167 mg/g respectively for MB, RB and CR. This activated carbon has a similar adsorption properties to that of commercial ones and show the same adsorption performances. The adsorption kinetics of the MB molecule in aqueous solution at different initial concentrations by OSAC was also studied. Kinetic experiments were well fitted by a simple intra-particle diffusion model. The measured kinetics constant was influenced by the initial concentration and we found the following correlation： Kid = 1.55 C0^0.51.     

Trametes sp.LS-10C产漆酶发酵培养基优化及其漆酶对偶氮染料的脱色性能

为了提高菌株Trametes sp.LS-10C的漆酶产量并初步研究该酶对偶氮染料的脱色性能,本文通过单因素实验及均匀设计对菌株Trametes sp.LS-10C产漆酶培养基进行了优化,获得最优培养基配方为:葡萄糖14.4 g·L~(-1)、豆渣10.1 g·L~(-1)、麸皮100 g·L~(-1)、NH_4Cl_3g·L~(-1)、KH2PO41.4g·L~(-1)、CuSO_4’5H2O 1 g·L~(-1)、NaCl 1 g·L~(-1)、MgSO_40.8 g·L~(-1)、CaCl_20.5 g·L~(-1).菌株发酵至8 d时漆酶产量为595.15 U·m L~(-1),约是优化前的35.66倍.进一步研究表明,该漆酶-介体系统对酸性红GR、酸性蓝40和酸性铬蓝K等3种偶氮染料脱色10 h后脱色率分别高达96.86%、91.28%和86.31%.相比公开发表的文献,本研究所报道的Trametes sp.LS-10C利用优化培养基发酵产漆酶达到了较高水平,具有酶活力高和发酵时间短等特征,且该漆酶在处理偶氮染料废水脱色领域中具有进一步研发和应用价值.     

变色栓菌对直接大红染料的脱色研究

从野外倒木上分离得到一株对直接染料具有高效脱色能力的白腐真菌CB1,采用形态学与分子生物学鉴定法对菌株CB1进行鉴定.结果表明,菌株CB1为变色栓菌(Trametes versicolor);在固体培养基上,利用T.versicolor CB1对5种直接染料进行脱色,结果显示,T.versicolor CB1对5种直接染料均可脱色,其中对直接大红的脱色效果最为明显;采用单因素分析方法对T.versicolor CB1脱色直接大红的培养条件进行优化,结果显示,以果糖为碳源、硝酸铵为氮源、p H=5、添加Cu SO_4和Ca Cl_2利于T.versicolor CB1对直接大红的脱色;通过正交试验优化T.versicolor CB1对直接大红的脱色条件,优化结果为:果糖10 g·L~(-1)、硝酸铵2 g·L~(-1)、Cu SO_41 mmol·L~(-1)、Ca Cl_23 mmol·L~(-1)、p H=5.优化条件下第7 d时的脱色率为78.23%,与优化前相比,脱色率提高了24.04%.     

羧基化碳纳米管强化臭氧化脱色三苯甲烷染料废水

利用羧基化碳纳米管作为催化剂,强化臭氧化脱色三苯甲烷染料废水。结果表明,当羧基化碳纳米管存在下,碱性品红废水的脱色率显著增加,在初始pH值为6.0,温度为25℃,初始染料浓度为100 mg/L,羧基化碳纳米管用量为6 mg/L时,30 min后脱色率达到94%。羧基化碳纳米管的催化性能高是由于碳纳米管特殊的纳米结构和—COOH基团,从而促进了臭氧化过程。羧基化碳纳米管可以强化臭氧化脱色三苯甲烷染料废水,对碱性品红、结晶紫、灿烂绿和孔雀石绿4种染料废水均能达到良好的脱色效果。     

铜铁氧体法处理模拟染料废水

探讨了不同反应条件对铜铁氧体法(in situ copper ferrite process)处理亚甲基蓝、结晶紫、刚果红和酒石黄这4种不同模拟染料废水的效果,并以亚甲基蓝模拟染料废水为例,研究了铁氧体法处理染料废水的反应热力学和生成沉淀物的物理化学性质,提出了铜铁氧体法处理模拟染料废水的主要机制.结果表明,通过调节铜铁氧体法的反应条件对4种模拟染料废水均可取得良好的处理效果.在c(Cu2+)=0.01 mol·L-1,c(Fe2+)=0.025 mol·L-1,c(OH)/c(M)=1.7(投加的氢氧根离子与金属的摩尔比),T=40℃,t=60 min的条件下,铜铁氧体法对亚甲基蓝、酒石黄、结晶紫、刚果红这4种模拟染料废水的最大处理能力分别达到349.2、382.2、402.5、831.8 mg·g-1.铜铁氧体法处理模拟染料废水的机制主要是高活性的新生态Fe-Cu沉淀物对染料分子的高效吸附和在沉淀物聚集过程中的卷扫、包裹作用.沉淀物通过磁分离、分解提纯、高温煅烧可生成铜铁氧体晶体材料回收利用.