MFAM模型在河流水质污染模拟及预测中的应用

文中以时间序列分析为基础，介绍了均值生成函数这一崭新概念，并且经成份因子提取分析推导建立了模拟序列的数字模型（简记为MFAM），经对黄河下游花园口断面的1988-1989年实测水质污染指标溶解氧（DO），氨氧，化学耗氧量（COD），五日生化需氧量（BOD5）等序列模拟，结果表明MFAM模型能较好地模拟河流水质污染指标的变化趋势，拟合平均误差只有5.2-6.4%，MFAM模型应用于预测1990-1991年水质污染指标变化，结果表明预测精度达85%以上，文中最后得出结论：MFAM模型应用于河流污染模拟和预测，是完全可行且十分方便。     

果树缺铁矫正新技术—高渗液注射法

本文概述了植物的铁素营养、果材缺铁黄化病的诊断治疗方法，论述了高涌液注射法矫治果树缺铁黄化病的理论、假说、树木微型注射器、克黄灵高渗液、树干穴位注射法、树干穴位插管法及其应用前景。     

DISTRIBUTION AND GRAIN-SIZE PARTITIONING OF METALS IN BOVFOM SEDIMENTS OF AN EXPERIMENTALLY ACIDIFIED WISCONSIN LAKE1

ABSTRACT: A study of concentrations and distribution of major and trace elements in surficial bottom sediments of Little Rock Lake in northern Wisconsin included examination of spatial variation and grain-size effects. No significant differences with respect to metal distribution in sediments were observed between the two basins of the lake, despite the experimental acidification of one of the basins from pH 6.1 to 4.6. The concentrations of most elements in the lake sediments were generally similar to soil concentrations in the area and were well below sediment quality criteria. Two exceptions were lead and zinc, whose concentrations in July 1990 exceeded the criteria of 50 μg/g and 100 μg/g, respectively, in both littoral and pelagic sediments. Concentrations of some elements, particularly Cu, Pb, and Zn, increased along transects from nearshore to midlake, following a similar gradient of sedimentary organic carbon. In contrast, Mn, Fe, and alkali/alkaline-earth elements were at maximum concentrations in nearshore sediments. These elements are less likely to partition to organic particles, and their distribution is more dependent on mineralogical composition, grain size, and other factors. Element concentrations varied among different sediment grain-size fractions, although a simple inverse relation to grain size was not observed. Fe, Mn, Pb, and Zn were more concentrated in a grain-size range 20–60 tm than in either the very fine or the coarse fractions, possibly because of the aggregation of smaller particles cemented together by organic and Fe/Mn hydrous-oxide coatings.     

论减灾效益的显现类型与减灾心理

减灾效益的获得离不开民众的参与,而其参与意识又与减灾效益的可见度有关。减灾效益越能迅速、明确地被人们见到或预见到,人们的减灾参与意识越高。在客观现实中,减灾效益的显现时间具有各种类型,而人们主观意识中“见”到的类型却又可能有质的差异。本文划分了减灾效益的显现类型并提出与论述了与其有关的一些问题,分析了其与主观意识之间的复杂关系,以及影响人们的减灾参与心理的作用机制。进而探讨了如何通过这些关系、机制的认识与把握,效益意识引导,对减灾见效时间意识的人为控制等途径提高民众的减灾参与意识与减灾效益。     

炭黑工业烟气余热的回收及利用

对油炉法炭黑生产过程烟气的来源，组成，发生量，特性作了介绍，着重研究了炭黑烟气余热的加收及利用。结果表明，采用余热锅炉串联多级空气预热器，是目前我国炭黑烟气余热回收及利用的最佳方法，采用这种方法，不仅可将高温炭黑烟气的余热量最大限度地回收及利用，同时可满足炭黑收集及烟气净化系统设备对炭黑烟气温度的要求，采用该法，炭黑烟气余热利用率可提高２０％以上，经济效益十分可观。     

我国道路交通安全的国际比较研究

我国的道路交通事故是严重的。在对我国道路交通事故特点进行比较研究的基础上，分析了道路交通事故多发的原因，提出了提高道路交通系统安全性的建议。     

酸法锂渣制取白炭黑研究

本文对用硫法锂渣制取白炭黑的基本原理及工艺流程作了较为详细的阐述，对该工艺的各种影响因素进行了探讨，并制得了合格的白炭黑，为锂渣的综合利用开辟了新的途径。     

On the usefulness of life cycle assessment of packaging

In reaction to a paper inEnvironmental Management in which the sense and sensibility of environmental assessments of packaging were questioned, it is argued that these types of assessments may be very useful, provided the relevant types of questions are posed. These boundary conditions are discussed, along with an overview of more recent methodological developments with respect to environmental assessment of products.     

The case for free market environmentalism

Environmental Ethics is the ethics of how we humans are to relate to each other about the environment we live in. The best way to adjust inevitable differences among us in this respect is by private property. Each person takes the best care of what he owns, and ownership entails the free market, which enables people to make mutually advantageous trades with those who might use it even better. Public regulation, by contrast, becomes management in the interests of the regulators, or of special interests, such as lovers of rare species-not the people they're supposed to be serving.     

An approach for analysing the potential for material efficiency improvement

Material efficiency improvement saves energy and reduces the consumption of primary resources and reduces the volume of waste. In this article an approach for analysing the potential for material efficiency improvement is proposed and discussed. In this approach the product functions performed by the materials and various improvement measures are taken into account. The potential for material saving and associated energy saving is assessed and evaluated economically. In this paper the approach is tested in an analysis of the potential for material efficiency improvement with respect to plastic packaging in the Netherlands. The technical reduction potential is found to be 34 ± 7% (157 ± 30 ktonne virgin plastics). Realization of this potential would improve the energy efficiency of the lifecycle of plastic packaging by 31% (10 PJ in 1988). From our study we conclude that our approach can indeed be used to investigate the potential for material efficiency improvement. However, a reliable technical and particularly an economical assessment of reduction measures cannot be made until more detailed data become available.