基于CAN总线的分布式安全报警系统

CAN总线是一种多主站局部网络 ,支持分布式控制系统或实时控制系统的通信功能 ,具有检错功能强 ,抗干扰 ,传输速率高等优点 ,广泛应用于工业控制领域。笔者以CAN总线技术为基础 ,用单片机和个人计算机组成分布式安全报警系统 ,该系统具有开放性、全分散体系结构、安装维护简单等特点。笔者介绍了该系统的总体构成及其软件和硬件设计。试验结果表明 ,该系统实现了事故现场、住户与住宅小区三者联系的安全报警功能。系统稳定性好 ,实时性强 ,报警准确。     

基于ArcIMS的旅游安全管理系统

结合旅游业的特点,即综合性、敏感性、涉外性或国际性,提出旅游安全管理系统应该包括:灾前的防范系统、灾时的抗灾系统以及灾后的评估善后系统3大部分的设计思路。将相应的旅游重大危险源监控系统的功能定为:以行政监察、社会监督、行业自律和应急救援体系为主的宏观管理系统。阐述了Web GIS的优点并推荐了一种构建Web GIS的新技术———ArcIMS,利用ArcIMS的系统构建的旅游安全管理系统具有功能健全、管理方便、系统成熟和安全可靠的诸多优点;同时整个系统的构建相对于其他Web GIS系统的开发而言,技术难度比较低、开发速度比较快,而且系统运行相对稳定,减轻了系统维护的负担。最后,结合旅游安全信息流的特点,具体阐述了运用ArcIMS作为旅游安全管理系统的平台的合理性和可行性。     

Life cycle energy impacts of automotive liftgate inner

This paper compares the life cycle energy use of a cast-aluminum, rear liftgate inner and a conventional, stamped steel liftgate inner used in a minivan. Using the best available aggregate life cycle inventory data and a simple spreadsheet-level analysis, energy comparisons were made at both the single-vehicle and vehicle-fleet levels. Since the product manufacture and use are distributed over long periods of time that, in a fleet, are not simple linear combinations of single product life cycles. Thus, it is all the products in use over a period of time, rather than a single product, that are more appropriate for the life cycle analysis. Using a set of consistent data, analyses also examine sensitivity to the level of analysis and the assumptions to determine the most favorable materials with respect to life cycle energy benefits.As expected, life cycle energy impacts of aluminum are lower than steel at a single-vehicle level – energy savings are determined to be 1.8 GJ/vehicle. Most energy savings occur at the vehicle operation phase due to improved fuel economy from lightweighting. The energy benefits are realized only very close to the average vehicle life of 14 years. With the incremental growth of the vehicle fleet, it takes longer – about 21 years – for aluminum to achieve life cycle equivalence with steel. The number of years aluminum needs to achieve equivalence with steel was found to be quite sensitive to aluminum manufacturing energy and fuel economy. As the steel industry races to compete with other materials for automotive lightweighting, a systems approach, instead of part-to-part comparison, is more appropriate in the determination of viability of aluminum substitution from an energy perspective.     

Influence of particle size on the aggregation behavior of nanoparticles: Role of structural hydration layer

More and more attention has been paid to the aggregation behavior of nanoparticles, but little research has been done on the effect of particle size. Therefore, this study systematically evaluated the aggregation behavior of nano-silica particles with diameter 130–480 nm at different initial particle concentration, pH, ionic strength, and ionic valence of electrolytes. The modified Smoluchowski theory failed to describe the aggregation kinetics for nano-silica particles with diameters less than 190 nm. Besides, ionic strength, cation species and pH all affected fast aggregation rate coefficients of 130 nm nanoparticles. Through incorporating structural hydration force into the modified Smoluchowski theory, it is found that the reason for all the anomalous aggregation behavior was the different structural hydration layer thickness of nanoparticles with various sizes. The thickness decreased with increasing of particle size, and remained basically unchanged for particles larger than 190 nm. Only when the distance at primary minimum was twice the thickness of structural hydration layer, the structural hydration force dominated, leading to the higher stability of nanoparticles. This study clearly clarified the unique aggregation mechanism of nanoparticles with smaller size, which provided reference for predicting transport and fate of nanoparticles and could help facilitate the evaluation of their environment risks.     

预腐蚀条件下不同孔数冷挤压强化7075-T6铝合金板件疲劳寿命退化规律

目的 研究腐蚀环境下单孔和多孔冷挤压强化铝合金板件的疲劳寿命退化规律和损伤机理。方法 针对2种不同孔距的三孔冷挤压强化7075-T6铝合金板件,采用模拟热带海洋大气环境的实验室加速腐蚀谱,开展不同腐蚀时间下的预腐蚀疲劳试验。结果 获得了3倍孔距的三孔挤压强化铝板以及单孔挤压强化铝板的C(t)曲线、疲劳S-N曲线和损伤形貌特征,分析了腐蚀后挤压强化试件的腐蚀机理及挤压强化作用。同时,将不同孔数试件的试验结果进行比较,探明了孔数对挤压强化铝板腐蚀和疲劳性能的影响。结论 腐蚀后挤压强化铝合金板件的疲劳性能发生显著退化,腐蚀损伤主要为剥蚀,疲劳裂纹萌生位置由孔边转移至表面。挤压孔数量对挤压强化铝合金板件的疲劳和腐蚀疲劳性能的影响较小。     

重复碰撞载荷下加筋板结构的动态响应研究

目的 探究船体加筋板结构在受到重复碰撞载荷作用下塑性变形的累计趋势,分析加筋板主要参数对损伤演化过程的影响,揭示高速、重复冲击下船体加筋结构的变化机理。方法 以一纵三肋加筋板为研究对象,建立基于能量法的刚塑性加筋板动态变形计算方法,以及基于Johnson-Cook本构关系的数值模拟方法,开展不同板架厚度、冲击能量以及冲击尺寸等参数对加筋板变形演化影响的研究。结果 对比分析了理论模型和数值方法,获得了不同参数下的加筋板的结构损伤演化规律。结论 理论解和数值解较为吻合。冲击能量增加后,加筋板的塑性变形量、塑性变形累积速度也随之增加。载荷集中程度越大,对于碰撞边界的破坏效应越大。     

ERT技术在无机酸污染场地调查中的应用

利用高密度电阻率法对硫酸废液污染的场地进行污染调查,由于硫酸废液侵入土壤,使其介质的溶质浓度发生了改变,导致SO₄2-与地表潜水作用,电传导性提高,被污染土壤含盐量增加,但是电阻率降低与未被硫酸废液侵入的土层形成了一定的电性差异. 通过二维和三维电阻率层析成像(ERT)技术,圈定硫酸废液侵入土壤中的分布范围、侵蚀深度以及扩散羽流等,并对ERT结果进行土工试验异常验证. 结果表明:硫酸废液污染土壤的视电阻率小于6.0 Ω·m,污染区域长度达25.0 m,深度约4.0 m;地表土污染长度为12.0 m,表面宽度约4.0 m,污染土壤的总体积约为222.0 m3.      

浅论水资源保护与可持续发展的关系

水是生命的源泉。文章从水资源的概念入手,阐明了水资源是可持续发展的主要领域之一,同时也是保障实现可持续发展的重要条件。笔者从水资源污染防治,保护政策及管理体制等方面提出了水资源的保护措施。     

镇江城市径流颗粒粒径分布及其与污染物的关系

为了解城市中不同粒径颗粒物对于径流中污染物的影响,2006年3月在镇江城市不同功能区地表采集了沉积物样品和径流样品,分析了颗粒物的粒径分布和污染物浓度.结果表明,晴天条件下道路沉积物主要由粒径＜250μm的颗粒组成;降雨初期主要为＜5μm的颗粒物随径流迁移,随降雨历时的延长较大颗粒开始随径流迁移,降雨期间随地表径流迁移主要为小于150μm的颗粒物,特别是5～40μm粒径段的颗粒要特别予以关注;同时污染物浓度也由降雨初期的高浓度逐渐下降并趋于稳定.明确了径流中污染物的主要输出形态,并通过分析不同降雨历时污染物与固体悬浮物和颗粒粒径的相关性探明了径流污染物形态输出的原因,从而为城市非点源污染的管理以及控制方法的选择提供科学依据.     

恒温油槽水介质与油介质升温时间关系讨论

本文阐述了在恒温油槽中水介质和油介质升温时间的关系,为了用水介质代替油介质进行升温试验,并保证试验的正确性。