大空间中热隐患的可视化监测

在无人值守的情形下,实现对大型建筑空间内发热物体、火灾等热隐患的智能监测是非常必要的,笔者基于已有的研究成果,讨论了大空间热隐患监测中,高温目标的可视化甄别和温度场的可视化测量原理。利用CCD(电荷耦合器件)的近红外响应特性(800~1200nm)、短波段内单调发射率函数、非相关滤色片构造和归一化数据处理模式等关键技术,使得常见的CCD图像监控设备实现了高温热隐患的非接触、可视化智能监测(即包括高温目标的可视化甄别以及温度场的可视化测量),改进的设备有望推广应用。     

二甲亚砜热稳定性的实验研究

采用先进的绝热加速量热仪为手段,对二甲亚砜的热稳定性进行了系统研究,其内容涉及纯二甲亚砜的热稳定性、加酸碱和硫化物等杂质后二甲亚砜的热稳定性,包括初始放热温度、温升速率、温度-压力等;通过修正试验数据,消除了热惰性因子的影响;得到了二甲亚砜的热稳定性特性。研究表明,在酸、碱存在时,二甲亚砜在室温下即可发生强烈的放热反应,导致二甲亚砜的分解温度提前。该实验研究结果,对二甲亚砜的安全生产工艺过程控制具有重要参考价值。     

典型装饰织物在不同氧浓度下热分析研究

人民生活水平的提高使人民对室内环境的舒适程度提出了更高要求 ,室内装饰织物的用量迅速增加 ,室内装饰织物在燃烧时会释放出大量有毒物质和热量 ,对人及环境构成了巨大危害。因此 ,研究装饰织物的燃烧特性非常重要。笔者利用热重 -差热 (TG -DTA)分析仪对纯棉、棉麻和腈纶这几种典型的装饰织物在不同的氧气浓度 (10 % ,15 % ,2 1% )和升温速率 (10K/min ,30K/min)条件下进行了热重分析 (TG)和差热分析 (DTA)实验 ,研究了它们的燃烧特性 ,并着重进行了不同氧浓度下的对比研究 ,发现试样的燃烧分为两个阶段。建立了以一级反应模型为主的动力学方程 ,并得出了各阶段的动力学参数、表观活化能和频率因子。     

细水雾阻隔火焰热辐射的模拟研究

从热辐射传递方程出发，根据Mie散射理论,考虑雾滴对热辐射的散射和吸收特性，建立细水雾阻隔火焰热辐射的两通量模型，并给出简化算法；同时建立小尺度模拟实验系统，对理论模型进行验证。结果表明，两通量模型较为合理地预测了细水雾对火焰热辐射的衰减作用。在此基础上，应用上述理论模型进一步探讨火焰温度、细水雾特性参数、雾场厚度对阻隔热辐射效率的影响，为细水雾系统的实际工程应用提供了理论和依据。     

红外和热分析联用在化工产品研究中的应用

运用实例论述了红外光谱分析与热分析联用在化工产品的产品开发和检测方面的应用。     

The effect of Na and Ca salts on MSWI bottom ash activation for reuse as a pozzolanic admixture

In this study the possibility of both chemical and combined chemical + thermal activation of municipal solid waste incinerator bottom ash was investigated. A number of chemical activators including Na₂SiO₃·9H₂O, NaOH, Na₂SO₄ and CaCl₂·2H₂O were individually added at varying concentrations to bottom ash/Portland cement mixtures having different bottom ash contents. The effect of the selected compounds was evaluated in terms of macroscopic properties including mechanical strength and composition of cementitious materials/water slurries. The results showed that Na-based activators were not capable of improving the characteristics of the cementitious products if compared to Portland cement under both normal and accelerated curing. Conversely, the use of calcium chloride at 40 °C-curing did promote the pozzolanic properties of bottom ash, leading to UCS values of 45.5 and 60.0 MPa after 10 and 20 days, respectively, as opposed to a value of 43.6 MPa obtained after 28 days for Portland cement under normal curing conditions.     

ACCURACY OF LAKE AND STREAM TEMPERATURES ESTIMATED FROM THERMAL INFRARED IMAGES1

Emitted thermal infrared radiation (TIR, λ= 8 to 14 μm) can be used to measure surface water temperatures (top approximately 100 μm). This study evaluates the accuracy of stream (50 to 500 m wide) and lake (300 to 5,000 m wide) radiant temperatures (15 to 22°C) derived from airborne (MASTER, 5 to 15 m) and satellite (ASTER 90 m, Landsat ETM+ 60 m) TIR images. Applied atmospheric compensations changed water temperatures by ?0.2 to +2.0°C. Atmospheric compensation depended primarily on atmospheric water vapor and temperature, sensor viewing geometry, and water temperature. Agreement between multiple TIR bands (MASTER ‐ 10 bands, ASTER ‐ 5 bands) provided an independent check on recovered temperatures. Compensations improved agreement between image and in situ surface temperatures (from 2.0 to 1.1°C average deviation); however, compensations did not improve agreement between river image temperatures and loggers installed at the stream bed (from 0.6 to 1.6°C average deviation). Analysis of field temperatures suggests that vertical thermal stratification may have caused a systematic difference between instream gage temperatures and corrected image temperatures. As a result, agreement between image temperatures and instream temperatures did not imply that accurate TIR temperatures were recovered. Based on these analyses, practical accuracies for corrected TIR lake and stream surface temperatures are around 1°C.     

不同环境体系下锂离子电池热失控特性实验研究

针对锂离子电池热失控引发的航空运输安全问题,自主设计并搭建锂离子电池热失控灾害演化及危险性分析实验平台。在敞开和密封环境体系下,对电加热触发荷电量(State of Charge,SOC)为0%、50%和100%的18650型锂离子电池热失控规律进行了实验研究。观察单体锂离子电池在敞开和密封体系中的热失控现象,并记录单体锂离子电池热失控时间、温度峰值及相应的温度变化。数据结果显示,相比敞开体系,密封体系有效的延缓了锂离子电池发生热失控的时间,并降低了锂离子热失控时释放的能量,为锂离子电池的航空运输安全性研究提供了理论依据和工程技术参考。     

PLC控制系统在钢渣热焖工艺中的应用

利用PLC控制系统,实现在钢渣热焖工艺中的恒压供水和钢渣热焖定时定量喷水的自动控制要求,具有国际先进水平,取得了良好的经济效益、社会效益和环境效益.