萃取浓缩-薄涂柱气相色谱法测定煤焦油废水中的联苯和菲

用苯萃取浓缩煤焦油废水中的联苯和菲，然后用薄涂柱气相色谱法进行测定。试验表明：该法具有色谱柱温低、快速、准确等特点。     

SiO2纳米粉掺杂对薄膜光催化剂结构和活性的影响

针对固定膜光催化剂吸附能力差的缺陷,在催化剂的涂覆溶胶中掺杂具有较大比表面积的SiO₂纳米粉制备了一种新的TiO₂薄膜.通过X射线衍射(XRD)、扫描电镜(TEM)和红外光谱(FTIR)等手段对催化剂进行表征发现,催化剂的晶相以锐钛矿为主,并含有少量的金红石,平均晶粒尺寸为27nm左右.其中掺杂的SiO₂以十几到几十纳米的无定型团簇形式分散于薄膜中,除了能增大薄膜的表面积外,对TiO₂的晶体结构和表面基团等性质几乎没有影响.光催化降解试验表明,SiO₂掺杂后薄膜的活性大大改善,并受掺杂SiO₂的原始粒径和掺杂量影响很大.此外,该催化剂还具有很好的稳定性,在连续30多天的使用中,对活性艳红X-3B的去除率一直维持在80%左右,活性未见降低.     

低透气性薄煤层煤与瓦斯共采技术研究

煤与瓦斯共采技术是煤矿绿色开采技术的重要组成部分之一.针对矿井煤层薄、煤层透气性低、煤层瓦斯含量低等特点,应用岩层移动理论和采空区瓦斯流动规律,研究了采场内卸压瓦斯的运移路径和富集区域,建立了矿井煤与瓦斯共采系统,采用了高位顶板穿层钻孔瓦斯抽采方法和老采空区瓦斯抽采方法等综合瓦斯抽采方法,降低了矿井瓦斯涌出量,消除了工作面瓦斯积聚现象,提高了矿井瓦斯抽采率和抽采浓度.在保障煤炭资源安全开采的前提下实现了瓦斯资源的安全、高效抽采.     

Trace Metal Concentrations in an Intensive Agricultural Watershed in British Columbia,Canada1

Abstract: Effects of agricultural intensification and a naturally occurring landslide of asbestos material upon water and sediment quality in a transboundary watershed were investigated. The water and sediments of the Sumas River watershed were analyzed for copper (Cu), zinc (Zn), chromium (Cr), and nickel (Ni) concentrations in 1993/1994 and 2003/2004 and differences within sites over time were examined. Based upon a review of the literature, Cu and Zn were used as indicators of agricultural impacts while Cr and Ni were used as indicators of impacts from an asbestos landslide. Animal unit equivalents (AUEs) were calculated on a per area basis as an indicator of livestock density using detailed statistical census data. Whatman #42 filtered metals, bioavailable metals, and sediment‐bound metals (in the <63 μm fraction) were determined at 22 sites along the mainstem and tributaries, including two reference sites. Temperature, pH, and dissolved organic carbon (DOC) were also measured. The bioavailable metal fraction was determined using the diffusive gradient thin film technique (DGT). Sediment‐bound results were compared with British Columbia’s Interim Sediment Quality Guidelines (ISQGs) and Severe Effects Levels (SELs). A Wilcoxon signed rank test was used to determine if the concentrations of metals changed significantly within sites between 1993/1994 and 2003/2004. Spearman rank correlation analysis was used to determine relationships between trace metals, water quality parameters, and AUEs/hectare. The results indicate that Cu and Zn levels in sediments increased significantly to concentrations above the ISQGs of 35.7 mg/kg and 123 mg/kg, respectively from 1993/1994 to 2003/2004 in streams, where associated land use was dominated by intensive agriculture. Higher AUEs/hectare were significantly correlated with greater bioavailable levels of Zn as well as higher sediment‐bound Zn concentrations. Neither Cu nor Cr were detected by the DGTs on any of the sampling occasions. The Cr and Ni sediment concentrations were highest in Swift Creek, the headwater tributary affected by the natural landslide of asbestos material, and decreased in the Sumas River downstream from the point of input. Cr and Ni concentrations have increased in the mid‐region of the Sumas River since 1993/1994, suggesting downstream movement of the asbestos material over time. DGT results indicated that bioavailable Zn is significantly positively correlated to sediment‐bound Zn and livestock density, and bioavailable Ni is significantly correlated to sediment‐bound Ni.     

城市污泥薄层干燥特性及动力学研究

通过污泥干燥实验,研究了污泥干燥过程中的形貌变化,考察了泥层厚度、温度、风速对污泥干燥特性的影响,并引入薄层干燥模型,采用MATLAB对污泥干燥的动力学过程进行模拟。结果表明:污泥中网络状的絮体结构不利于水分的蒸发;在泥层厚度为0.4 mm,将污泥含水百分比20%作为干燥终点时,干燥过程为恒速干燥,能够有效地降低干燥时间;提高温度和风速,可以提高污泥水分的表面蒸发速率,减少干燥时间;Page模型比其他模型更适合本次污泥干燥分析。应用Fick扩散模型,得到在温度50~70℃、泥层厚度0.4~2.0 mm条件下有效扩散系数的变化范围为1.13×10-9~8.90×10-9m2/s,并得到了有效扩散系数随厚度、温度变化的关系式。     

UV／TiO2薄膜体系光降解酞酸酯研究

采用自制玻璃负载TiO2薄膜，研究了UV-Vis／TiO2以及UV／TiO2／H2O2体系对2种酞酸酯DBP和DEHP的光催化降解情况。研究结果表明，TiO2在暗处对酞酸酯没有降解作用；UV／TiO2体系能有效光降解DBP和DEHP，TiO2具有明显的光催化作用，增强因子分别为，fDBP=2．06，fDEHP=1．53；在一定浓度范围内DBP在UV／TiO2体系中的降解速率与其初始浓度成负一级动力学关系；UV／TiO2／H2O2体系对DBP的光降解能力远大于UV／TiO2和UV／H2O2体系，H2O2能显著提高TiO2的光催化活性。     

溶胶-凝胶工艺制备掺铅TiO_2纳米薄膜及其光催化性能的研究

通过ｓｏｌ－ｇｅｌ工艺在玻璃表面制得了均匀透明的掺铅和未掺铅ＴｉＯ２纳米薄膜；在宏观上，膜层表面光滑平整；在微观上，ＴｉＯ２薄膜由ＴｉＯ２球形颗粒组成，其颗粒大小在５０～１５０ｎｍ范围内。掺铅ＴｉＯ２镀膜玻璃在紫外光附近的透光率明显小于未掺铅ＴｉＯ２镀膜玻璃的透光率，这说明掺铅ＴｉＯ２镀膜玻璃对紫外光具有明显的吸收。敌敌畏水溶液的光摧化降解实验表明，掺铅ＴｉＯ２镀膜玻璃对有机磷农药的光解率明显高于未掺铅ＴｉＯ２镀膜玻璃的光解率。这为进一步提高ＴｉＯ２的光催化效率开辟了新的途径。     

深孔薄壁锥形件冷加工工艺研究

通过对锥形件产品的研制 ,论证了采用复合挤压、变薄拉伸和扩锥挤压相结合的工艺方法是加工深孔薄壁锥形件的可靠工艺方法 ,得出了变薄拉伸加工中加工率不应处于临界加工率状态的结论。     

光电催化降解2,4-二氯苯酚的研究

采用Sol-Gel法制备了纳米TiO2／导电玻璃薄膜电极，应用XRD表征了TiO2薄膜的物相和粒度，以上述电极为工作电极和光催化剂，研究了2，4－二氯苯酚溶液的光催化和光电催化降解行为，结果表明，外加阳极偏压为0．7V，时间100min时，光电催化降解率为85％，高出光催化降解25％，2，4－DCP初始浓度（C0）与反应速率（r0)的关系符合Langmuir-Hinshelwood方程，当C0≤0．50mmol.L^-1时，光电催化降解速率可用一级动力学模式来描述。     

薄壁管螺旋槽的旋压工艺研究

介绍了薄壁管螺旋槽旋压时的测力装置和各工艺参数对旋压力的影响,可为设计旋压机床、编制旋压工艺,设计工夹具提供理论依据。