THE INFLUENCE OF (x,y) UNCERTAINTY ON PREDICTION ERROR AND CONTOUR LINES FROM A THREE-DIMENSIONAL SURFACE1

ABSTRACT: In geohydrology, three-dimensional surfaces are typically represented as a series of contours. Water levels, saturated thickness, precipitation, and geological formation boundaries are a few examples of this practice. These surfaces start as point measurements that are then analyzed to interpolate between the known point measurements. This first step typically creates a raster or a set of grid points. In modeling, subsequent processing uses these to represent the shape of a surface. For display, they are usually converted to contour lines. Unfortunately, in many field applications, the (x, y) location on the earth's surface is much less confidently known than the data in the z dimension. To test the influence of (x, y) locational accuracy on z dimension point predictions and their resulting contours, a Monte Carlo study was performed on water level data from northwestern Kansas. Four levels of (x, y) uncertainty were tested ranging in accuracy from one arc degree-minute (± 2384 feet in the x dimension and ± 3036 feet in the y dimension) to Global Positioning Systems (GPS) accuracy (± 20 feet for relatively low cost systems). These span the range of common levels of locational uncertainty in data available to hydrologists in the United States. This work examines the influence that locational uncertainty can have on both point predictions and contour lines. Results indicate that overall mean error exhibits a small sensitivity to locational uncertainty. However, measures of spread and maximum errors in the z domain are greatly affected. In practical application, this implies that estimates over large regions should be asymptotically consistent. However, local errors in z can be quite large and increase with (x, y) uncertainty.     

电催化氧化技术处理含盐有机废水研究进展

介绍了电催化氧化技术在实际工业废水处理中的优势,对其反应原理进行了概述。总结了电催化氧化技术在石油、制药、造纸行业废水和含氨氮类有机废水处理中的研究进展,指出：电催化氧化技术未来的主要研究方向为研发新型电催化阳极材料;开发高效电解反应器;探索电催化氧化技术与其他处理工艺组合联用。     

氨电极测定空气中氨的方法研究

本文对氨电极测定空气中氨的方法进行了研究，确定了最佳分析条件。分析方法的精密度，其平均变异系数为４７％；平均回收率为９９８％，测定结果与纳氏试剂比色法无显著性差异，该方法适用于空气中氨的测定。     

阳极溶出伏安法测定ppb级Cu,pb,Cd的实验条件的选择

本文介绍了在环境监测中，经试验研究，确定的用阳极溶出伏安法，连续分析环境样品中重金属Ｃｕ，Ｐｂ，Ｃｄ的最佳条件，即用悬汞电极做工作电极，用０．１Ｍ离氯酸做支持电解质，纯氮除氧。当ＰＨ值取２－７，富集电位数－１．１～－１．２Ｖ时，不但可连续测定一定浓度范围的重金属Ｃｄ，Ｐｂ，ＣＵ；而且方法灵敏度高，精密良好，线性相关关系可达０．９９９０，回收率达８５－１１５％，获得了良好的分析效果。     

A study on hexachromic ion selective electrode based on supported liquid membranes

An ion selective electrode (ISE) for determining Cr(VI) using supported liquid membranes (SLMs) containing trioctylphosphine oxide (TOPO) was investigated in this study. TOPO, as a carrier, had a high selectivity for Cr(VI) against interfering ions such as sulfate, nitrate, nitrite, and chloride. The composition of the SLM was optimized as 0.193 g TOPO/1 mL NPOE (o-nitrophenyl octyl ether)/0.5 g poly (vinyl chloride) for detection of Cr(VI). The Cr(VI) concentration was measured in the range of1 × 10^-3 to 1 × 10^-6 M with the SLM prepared in the study. It seemed that Cr(VI) was transported in the SLM as a triply charged ion indicated by the slope of the emf response. Selectivity coefficients and detection limits of Cr(VI) in the presence of interfering ions were determined experimentally using the fixed interference method.     

纵横复合收尘极板电除尘器特性的研究

电除尘器由于体积大 ,成本高而制约其在企业中应用。根据电流体力学收尘场原理 ,提出一种新型的纵横复合收尘极板电除尘器 ,它把纵向和横向电除尘器有机结合起来。通过正交试验与单因素试验 ,得出这种新型电除尘器的最佳运行参数。它能有效提高单位体积电除尘器收尘极板面积 ,对减小电除尘器体积、改善电除尘器性能具有较大的现实意义     

基于EEMs和DOM分离的荧光特征及DBPsFP研究 ——以南方某市水源水为例

以南方某市饮用水源地源水为研究对象,利用三维荧光-区域积分法(3D-EEMs-FRI)和DAX-8树脂富集分离技术,研究了水样各组分的溶解性有机物(DOM)组成特征、三维荧光光谱(3D-EEMs)特征;采用生成潜能测试,考察了典型消毒副产物三卤甲烷(THMs)和卤代乙酰胺(HAcAms)生成势以及其与水质指标和荧光强度...     

Ag/AgCl海洋电场探测电极研究进展

针对目前广泛应用于海洋电场传感器中的全固态粉压型Ag/AgCl电极对的极差稳定时间长,无法满足快速部署、实时探测这一要求,系统阐述了Ag/AgCl海洋电场探测电极的性能要求和制备工艺方法,对比了制备工艺的优缺点。综述了Ag/AgCl海洋电场探测电极的制备工艺优化以及改性方法,论述了近些年国内外关于Ag/AgCl电极改性的研究进展,并对Ag/AgCl海洋电场探测电极未来的研究与发展趋势进行了展望。     

Free cupric ions in contaminated agricultural soils around a copper mine in eastern Nanjing City, China

To determine the environmental free metal ion activity was a recent hot issue. A method to measure low-level free cupric ion activity in soil solution extracted with 0.01 mol/L KNO3 was developed by using cupric ion-selective electrode （ISE） and calibrating with Cu-buffer solution. Three copper buffers including iminodiacetic acid （IDA）, ethylenediamine （EN）, and glycine （Gly） were compared for calibrating the Cu-ISE curves in the range of free cupric ions （pCu^2＋） 7-13. The Cu-EN buffer showed the best electrode response and thus was applied as the calibration buffer. The pCu^2＋ of 39 contaminated agricultural soils around a copper mine was measured, ranging from 5.03 to 9.20. Most Cu in the soil solutions was found to be complexed with dissolved soil organic matters, averaging 98.1%. The proportion of free Cu^2＋ ions in the soil solutions decreased with the increasing of solution pH. Soluble Cu and free Cu^2＋ ions concentrations were analyzed by multiple linear regressions to evaluate the effects of soil properties on metal levels and speciation. The results showed that soil solution pH was the most significant factor influencing pCu^2＋ （with R^2 value of 0.76）, while not important for the soluble Cu concentration.     

GD型三电极电除尘器系统及设备常见故障

论述了GD型三电极电除尘器的系统及设备运行中的常见故障及进一步完善的措施.