Inhibition and recovery of nitrification in treating real coal gasification wastewater with moving bed biofilm reactor

Moving bed biofilm reactor (MBBR) was used to treat real coal gasification wastewater. Nitrification of the MBBR was inhibited almost completely during start-up period. Sudden increase of influent total NH3 concentration was the main factor inducing nitrification inhibition. Increasing DO concentration in the bulk liquid (from 2 to 3 mg/L) had little e ect on nitrification recovery. Nitrification of the MBBR recovered partially by the addition of nitrifying sludge into the reactor and almost ceased within 5 days. Nitrification ratio of the MBBR achieved 65% within 12 days by increasing dilute ratio of the influent wastewater with tap water. The ratio of nitrification decreased to 25% when influent COD concentration increased from 650 to 1000 mg/L after nitrification recovery and recovered 70% for another 4 days.     

Production and application of anaerobic granular sludge produced by landfill

Sludge granulation is considered to be the most critical parameter governing successful operation of an upflow anaerobic sludge blanket and expanded granular sludge bed(EGSB)reactors.Pre-granulated seeding sludge could greatly reduce the required start- up time.Two lab-scale and a pilot-scale EGSB reactors were operated to treat Shaoxing Wastewater Treatment Plant(SWWTP) containing wastewater from real engineering printing and dyeing with high pH and sulfate concentration.The microbiological structure and the particle size distribution in aerobic excess sludge,sanitary landfill sludge digested for one year,and the granular sludge of EGSB reactor after 400 d of operation were analyzed through scanning electron microscopy (SEM) and sieves.The lab-scale EGSB reactor seeded with anaerobic sludge after digestion for one year in landfill showed obviously better total chemical oxygen demand (TCOD)removal efficiency than one seeded with aerobic excess sludge after cation polyacrylamide flocculation-concentration and dehydration.The TCOD removed was 470.8 mg/L in pilot scale EGSB reactor at short hydraulic retention time of 15 h.SEM of sludge granules showed that the microbiological structure of the sludge from different sources showed some differences.SEM demonstrated that Methanobacterium sp.was present in the granules of pilot-scale EGSB and the granular sludge produced by landfill contained a mixture of anaerobic/anoxic organisms in abundance.The particle size distribution in EGSB demonstrated that using anaerobic granular sludge produced by sanitary landfill as the seeding granular sludge was feasible.     

基于结构参数响应的内循环流化床流体特性优化数值模拟

流化床是一种结构复杂而能量转化高效的反应器型式,为了实现系统化的内循环流化床优化设计,利用欧拉-欧拉双流体模型构建了不同结构的CFD流化床模型,在分别改变高径比、导流筒与反应器的直径比和底隙高度3个结构因素的情况下,考察流化床内全流场、局部流场、液相运动速度及气含率等气液两相流的响应特性,分析结构因素及操作因素对流体运动的内在影响,阐明工程优化设计的方向.数值模拟结果表明:高径比主要影响气液流动型态,低高径比时容易出现漩涡和返混,工程中应采用导流内构件并重视气体分布装置的合理设计;导流筒与反应器的直径比主要影响液体循环速度,存在一个合理的区间,考虑流动速度与气含率,流化床直径比可取0.6～0.8,最佳取值为0.7;底隙高度影响流化床底泥区的流体运动,应约等于流化床下降区的缝隙长度.CFD模拟可作为污染控制技术工业放大和优化设计的辅助工具.     

Sulfide oxidation in fluidized bed bioreactor using nylon support material

A continuous fluidized bed bioreactor (FBBR) with nylon support particles was used to treat synthetic sulfide wastewater at different hydraulic retention time of 25, 50 and 75 min and upflow velocity of 14, 17 and 20 m/hr. The effects of upflow velocity, hydraulic retention time and reactor operation time on sulfide oxidation rate were studied using statistical model. Mixed culture obtained from the activated sludge, taken from tannery effluent treatment plant, was used as a source for microorganisms. The diameter and density of the nylon particles were 2-3 mm and 1140 kg/m³, respectively. Experiments were carried out in the reactor at a temperature of (30 ± 2)℃, at a fixed bed height of 16 cm after the formation of biofilm on the surface of support particles. Biofilm thickness reached (42 ± 3) μupm after 15 days from reactor start-up. The sulfide oxidation, sulfate and sulfur formation is examined at all hydraulic retention times and upflow velocities. The results indicated that almost 90%-92% sulfide oxidation was achieved at all hydraulic retention times. Statistical model could explain 94% of the variability and analysis of variance showed that upflow velocity and hydraulic retention time slightly affected the sulfide oxidation rate. The highest sulfide oxidation of 92% with 70% sulfur was obtained at hydraulic retention time of 75 min and upflow velocity of 14 m/hr.     

Nitrogen removal and simultaneous nitrification and denitrification in a fluidized bed step-feed process

For urban wastewater treatment, we conducted a novel four-stage step-feed wastewater treatment system combined with a fluidized bed laboratory experiment to investigate chemical oxygen demand (COD), NH₄⁺-N, and total nitrogen (TN) removal performance. The removal rates of COD, NH₄⁺-N and TN were 88.2%, 95.7%, and 86.4% with effluent concentrations of COD, NH₄⁺-N and TN less than 50, 8, and 10 mg/L, respectively. Biomass and bacterial activities were also measured, with results showing more nitrobacteria in the activated sludge than in the biofilm; however, bacterial activity of the biofilm biomass and the activated sludge were similar. Nitrogen concentrations during the process were also detected, with simultaneous nitrification and denitrification found to be obvious.     

循环流化床烟气脱硫系统控制技术

阐述了循环流化床烟气脱硫系统电气控制的内容、方法、仪表等技术。根据循环流化床烟气脱硫实验系统温度、压力、流量的测量,实现了该系统闭环开环自动、手动控制的功能,并且根据实验室的具体情况,采取特殊技术方式,完成实验自动化的控制。该控制技术对扩大到实际工程应用具有指导意义。     

流化床微生物燃料电池基质降解动力学研究

研究了在30℃左右条件下,流化床微生物燃料电池(FBMFC)处理有机废水的基质降解动力学。在空气阴极、单室、无膜液固流化床微生物燃料电池中,以污水和椰壳活性炭为液相和固相,通过实验考察不同水力停留时间的污水COD变化。选取Monod模型和简单动力学模型,通过合理的假设推导出流化床微生物燃料电池处理模拟有机废水时的基质降解动力学模型。将实验数据代入到理论推导得到的动力学模型中,进行线性拟合和对比分析,得到Monod模型和一级反应动力学模型表达式。结果表明流化床微生物燃料电池基质降解为一级反应;Monod模型表达式为:t/s0-st=4.769 7/st+15.885,一级动力学模型为:lnCA=-0.025 32t+8.109 15,理论推导模型与实验数据具有较好的吻合性。     

膨胀石墨流态化电极处理酸性含镉废水的研究

该法电流效率４０％－５０％,除镉速度４０．７ｍｇ／ｍｉｎ,能耗６－１０ｋＷ·ｈ／（ｋｇ·ｄ）。处理后废水中Ｃｄ＾２＋浓度可降至１０ｐｐｍ以下,虽未能达到国家排放标准（０．１ｐｐｍ）,但从镉的回收方面来看还是有效的。实验确定了处理酸性含镉废水的适宜条件,同时探讨了从废水中回收金属镉的方法。     

水解－好氧法处理含硫废水的研究

采用水解－好氧法处理炼油过程中产生的含硫废水。试验结果表明：经过此工艺处理后的出水COD、氨氮、硫化物、酚分别为118.5mg/L、29.4mg/L、0.0mg/L和0.50mg/L,相应的去除率分别为90.4％、56.6％、100％和99.3％,出水水质达到国家有关排放标准。同时,设计独特的三相好氧床不仅能有较高的硝化能力,而且无剩余污泥排放。因此,可以省略剩余污泥的处理过程     

三相生物流化床膨胀特性方程的研究

研究建立了描写三相生物流化床床层膨胀特性的经验关联式．当已知床内表观液速、表观气速和载体上生物膜厚度时,能比较准确地预测床层膨胀高度,为设计提供依据．与以往不同的是,本研究通过等效函数的设置和求解,用一个方程将两相床和三相床的膨胀特性描述出来．该方程能反映三相床低气速下的床层收缩行为,在气速为零时可还原为两相床．试验用反应器直径１．４ｍ,高６．５ｍ,载体为０．３—０．５ｍｍ的石英砂,射流曝气体内充氧．４种生物膜厚：５２,８０,１１５,１３７μｍ．试验用生活污水ＢＯＤ５４７．６—７７．２ｍｇ／Ｌ．