大中型锅炉应用双循环流化床烟气脱硫装置的技术经济分析

介绍了自主研制的双循环流化床烟气悬浮脱硫技术（DCFBFGD）的工艺流程、技术特点,并以里彦电厂的一台430t／h燃煤锅炉为例,对大中型锅炉应用此项技术进行了技术经济分析。分析表明,该脱硫装置适合大中型锅炉的脱硫改造,投资费用和运行成本低。     

多元组合系统净化富营养化水体的示范工程

杭州西湖上游龙泓涧受到周边茶园面源污染,水体出现严重的富营养化,为解决此问题,基于生物净化技术与工程措施相结合的思想,开展景观水体的净化处理示范工程研究。该工程根据河道特点,将生态廊道,生物沸石和生态浮床3种技术组合,对水体进行多重净化作用,水质得到了明显的改善。多级生态廊道可相对延长水流的流程,尽量减少死水区和短流。生物沸石本身具有物理截留和吸附作用,表面形成的生物膜对富营养化水体中的污染物能保持长效和稳定的去除作用。以陶粒为载体,悬挂立体弹性填料的多层次立体生态浮床通过植物和微生物的共同作用对水体进行生态修复。结果表明,该工程净化效果良好,对水体中的COD、TP、TN、NH4+-N、NO3--N的平均去除率分别为24%、46.24%、31%、24.43%、13.42%,达到示范工程的预期目标,并且夏季的处理效果高于冬季,该技术具有一定的应用前景。     

硝基苯废水的厌氧-好氧基本实验与工艺理论分析

根据含硝基苯（ Ｎ Ｂ） 废水的水质特性,利用自然驯化和诱变驯化得到的两株厌氧菌 Ｂａｃｔｅｒｏｉｄｅｓ ｄｉｓｔａｓｏｎｉｓ（ 吉氏拟杆菌） 和 Ｂａｃｔｅｒｏｉｄｅｓ ｍｅｒｄａｅ（ 屎拟杆菌） ,采用厌氧填充床－ 好氧污泥床相结合的 Ａ／ Ｏ 工艺使 Ｎ Ｂ 得到彻底降解．研究表明：利用吸附能力强的活性炭作为厌氧填充床的载体,可以在短期内使高效菌挂膜;在影响填充床厌氧处理效果中,ｔ Ｈ Ｒ和进水ｐ Ｈ 值是主要影响因素,而 Ｎ Ｂ 质量浓度ρ（ Ｎ Ｂ） 和θ／ ℃次之．实验结果表明：进水ρ（ Ｎ Ｂ） 为３００ ～８００ ｍｇ／ Ｌ, Ｃ Ｏ Ｄ Ｃｒ 值为１ ５００ ～３ ５００ ｍｇ／ Ｌ,色度为１００ ～２５０ 倍,经过厌氧填充床控制ｔ Ｈ Ｒ＝ ２４ ｈ ,硝基苯转化率大于９０ ％ , Ｃ Ｏ Ｄ 去除率为２０ ％ ～３０ ％ ;在好氧污泥床中继续曝气１２ ｈ ,则总 Ｃ Ｏ Ｄ 去除率为６０ ％ ～７０ ％ ,色度去除率大于７０ ％ ．连续９０ ｄ 用氯霉素制药厂实际废水处理运行结果亦显示本工艺的可行性．     

新型多孔高分子载体厌氧流化床启动实验研究

制备了两种不同孔径（ｄ＞０．５μｍ）分率的聚丙烯酸酯类多孔载体，与多孔颗粒活性炭（ＧＡＣ）在完全相同的启动条件下，作厌氧流化床固定化微生物对比实验．结果表明：新型高分子载体能有效促进厌氧菌固定化速度，可比ＧＡＣ缩短反应器启动时间１５ｄ左右；扫描电镜观察发现，多孔高分子生物颗粒球形度高，表面生物膜致密坚实，内孔微生物聚集丰富，而ＧＡＣ生物颗粒形状不规则，表面生物膜疏松呈鳞片状，内孔不易驻留微生物．另外，根据高分子载体内孔产甲烷丝菌的形态和分布特征，获取了当生物膜持续增厚后（δ＞１００μｍ），基质扩散阻力影响内孔微生物活性的证据．     

新型内循环生物流化床处理豆制品废水研究

对采用射流曝气的新型内循环三相生物流化床处理豆制品废水进行了研究。结果表明 :间歇运行时 ,当循环水浓度在 30 0 0～ 4 0 0 0mg/L、循环流量在 10 0～ 2 0 0L/h之间 ,曝气量在 4 0～ 6 0L/h时 ,COD去除率可达到 95 %以上 ,去除容积负荷达到 10kg/m3 ·d以上 ;连续运行时 ,在进水流量 10 0L/h、COD <4 0 0mg/L时 ,出水COD可以达标     

沸腾炉烟尘磨损性及对策

沸腾炉烟尘含尘浓度高达200一300g／m^3，并且温度高，成分杂，其对净化系统的磨损性不容忽视。本文通过探讨高浓度沸腾炉烟尘的磨损机制，针对湘南某化工厂运行实践，提出了切实可行的防磨损系列措施。     

The effect of continuous Ni(Ⅱ) exposure on the organic degradation and soluble microbial product(SMP) formation in two-phase anaerobic reactor

A two-phase anaerobic reactor fed with glucose substrate (3 g chemical oxygen demand (COD)/L) was used to investigate the effects of toxic metals on the degradation of organics and the soluble microbial product (SMP) formation. Low concentrations of Ni(II) (5 and 10 mg/L) promoted the acid phase, whereas high concentrations (15, 20, and 25 mg/L) exhibited an inhibitory effect on, but did not alter the fermentative method, which mainly involved the fermentation of propionic acid. The methanogenic microorganism exhibited a strong capability adapting constantly increased Ni(II) levels. The acid phase was an accumulation stage of SMP. In the absence of Ni(II), the high-molecular-weight material in the effluent SMP mainly contained polysaccharide, tryptophan, and casein. Methanogens metabolized most of the polysaccharide, the whole tryptophan content, and part of the casein, leading to the presence of humic acid and protein in effluent. After Ni(II) dosage, the protein and polysaccharide of the acid phase increased, and tryptophan changed, while casein remained stable. More protein than polysaccharide was produced, suggesting the prominent function of protein when addressing the negative effect of toxic metals. The analysis of DNA confirmed the change of bacterial activity.     

Effect of media heights on the performance of biological aerated filter

The optimum media height of carbon oxidation and nitrification in a down-flow biological aerated filter was determined, and the distribution of the heterotrophic and nitrifying populations through studying the changes of organic carbon contents and ammonia concentration at different media height was got. The results showed that as a down flow BAF with granular media, the active layer of nitrifiere was deeper than heterotrophs in BAF. And the optimum media height for the removal of SS, CODcr and NH4^＋ -N was 40 cm,60cm and 80 cm respectively. The removal efficiency of SS, CODcr and NH4^＋ -N was 79.1%, 63.9% and 96.4% respectively under theinfluent CODcr and NH4^＋ -N of 122.1 mgCODcr/L and 14.84 mgNH4^＋ -N/L, the influent flux of 15.8 L/h, air to liauid ratio of 3 : 1.     

内循环流化床光催化反应器的数值模拟与结构优化

设计了一种新型三相内循环流化床光催化反应器并采用气、液两相模拟方法对其进行了结构优化.依据模拟结果,明确了挡板的位置、长度、底部曝气面积等因素对反应器流体行为的影响.结果表明,最优反应器升、降流区横截面积比为1:1,挡板距反应器底部的距离为0.175m,挡板顶部与沉降区底部持平,底部曝气面积为升流区面积的1.2倍.将该反应器进行三相数值模拟,模拟结果表明,固相催化剂在反应器内能够很好地流化,反应器内无明显的死区,其固液分界面低于气液分界面,沉降区能够发挥很好的固液分离效果.     

An experimental study for H2S and CO2 removal via caustic scrubbing system

In this study, removal of hydrogen sulfide (H₂S) and carbon dioxide (CO₂) from simulated syngas has been studied on one column scrubbing system. Gas flow rate as a measure of gas residence time and superficial gas velocity, gas composition, inlet H₂S load, flow modes (countercurrent and cocurrent) and packing geometry were the parameters in the design and/or operation of an acid gas scrubber system. Better H₂S scrubbing efficiencies have been obtained in countercurrent flow mode than that of cocurrent flow mode. When accordingly designed, static mixer with its superior performance on H₂S removal overweighed to structured packings. The coexistence of CO₂ and H₂S has been shown to increase the sodium hydroxide (NaOH) consumption along the scrubber column thereby decreasing the H₂S removal efficiency at higher H₂S loads. The gas residence time as changing with the gas velocity was found to be more dominant on acid gas removal efficiency than the effect of superficial gas velocity within the experimented range. A gas residence times of equal or above 3 s were seemed to be closer to the optimum point.