污泥过热蒸汽干燥单因素试验

为了研究污泥常压过热蒸汽干燥过程中各干燥因素对干燥性能指标的影响规律,研制了一套污泥常压过热蒸汽干燥试验装置。利用研制的过热蒸汽干燥试验装置进行了不同温度、污泥质量和蒸汽流量的干燥试验。试验结果表明:蒸汽温度在180~260℃,污泥质量在6~30 g,蒸汽流量在18~40 m~3/h时,随着过热蒸汽温度升高、蒸汽流量增大,相对单位能耗值均是先减小后增大,平均干燥强度一直增大;随着污泥质量增大,相对单位能耗是先减小后增大,平均干燥强度一直减小。     

中国风机制造技术转移模式与技术进步效果评价

根据技术转移过程中技术受方的性质,将中国风机制造技术转移分为"外商独资企业"、"中外合资企业"和"中资企业"三种模式.通过技术转移的层次、技术先进程度、技术转移的规模、技术转移的速度,对三种模式下技术转移的效果进行了评价.研究发现,通过技术转移,中国风机制造技术有了迅速的发展,但落后于国际先进水平的情况仍没有改变.中资企业的技术转移模式在转移技术的层次、技术转移规模和技术转移速度上,都要优于外商独资企业和中外合资企业模式,对中国风机制造技术进步的作用更大.在此基础上,本文提出,在中资企业模式下,在引进技术的同时,积极消化吸收,并重视与外国企业开展联合研发,才能最终获得创新能力.这也应当成为中国政府激励政策作用的重点.     

衡水电厂3B给水泵汽轮机转速摆动原因分析

给水泵小汽轮机的转速摆动是给水系统中常见的问题,引起的原因有测量不准、PID参数整定不当、伺服系统故障等多个方面。介绍了衡水电厂3B给水泵汽轮小机转速摆动故障的分析解决过程,分析了EH油质对电液伺服系统的重要性,提出了相关检修维护注意事项。     

An optimized airfoil geometry for vertical-axis wind turbine applications

ABSTRACT

In this work, a new airfoil shape optimized for vertical-axis wind turbine applications is proposed. Different airfoil shapes have been analyzed with JavaFoil, a panel method software. Then, the results from the analysis have been used to optimize the performance of the new airfoil shape. Afterward, Computational Fluid Dynamics (CFD) simulations of the proposed airfoil, UO-17-LDA, are run for different angles of attack to provide insight into the flow field and the mechanisms related to this increase in performance. The UO-17-LDA airfoil presents a high lift-to-drag ratio and a delayed stall angle with respect to the original FX-63-137 airfoil, making it suitable for vertical-axis wind turbine applications. This increase in performance has been verified by comparing two VAWT designs with the original and the proposed airfoil using a double-multiple streamtube model. Finally, the practicality of JavaFoil for the comparison of different airfoil geometries has been verified, as it is capable of obtaining results for a wide number of flow conditions in small computational times and with a user-friendly interface. Nevertheless, the results diverge from the actual solution for high angles of attack (beyond stall). Hence, the time and effort required to perform CFD simulations is justified to gain insight into the actual behavior of a particular airfoil, as well as to obtain a richer analysis of the flow field and the mechanisms related to the airfoil performance.     

涡轴发动机燃气涡轮叶片热腐蚀机理分析与改进

目的 提高航空发动机燃气涡轮工作叶片的结构完整性、安全性和可靠性。方法 以某型涡轴发动机燃气涡轮转子叶片热腐蚀案例为研究对象,详细阐述热腐蚀下燃气涡轮转子叶片的结构破坏形式,分析发生热腐蚀部位的分布规律。通过冶金分析方法,研究燃气涡轮转子叶片的热腐蚀-疲劳失效形式。结果 燃气涡轮叶片高摩擦系数的区域在高温燃气的冲刷效应以及热盐腐蚀的作用下,发生表面涂层腐蚀剥落。涂层腐蚀剥落部分的叶片合金基体受到高温燃气的氧化与侵蚀后,形成了热腐蚀坑。腐蚀坑表面的凹凸处出现应力集中,并萌生裂纹,最终引起叶片疲劳断裂。结论 探究了典型腐蚀性物质对燃气涡轮转子叶片的耐高温涂层与镍基合金基体侵蚀与氧化的化学本质,最后针对燃气涡轮转子叶片热腐蚀问题提出了改进建议,可对防范航空涡轴发动机热腐蚀问题提供有益参考。     

The effect of pyrolysis atmosphere on bio-oil yields and structure

A food industry waste, almond shell, was pyrolyzed under three different environment static, nitrogen, and steam to produce bio-oil and its derivatives. The oil yield obtained at pyrolysis temperature of 600°C was 24.23% in a static atmosphere, whereas it increased to 27.25% and 33.05% in nitrogen and steam atmospheres, respectively. The bio-oil obtained under steam atmosphere is very efficient due to the production of high liquid and gas yields. Moreover, co-feeding steam during the pyrolysis altered the bio-oil structure by increasing the aliphatics and reducing the asphaltenes. Moreover, steam treatment also increases H/C and heating value of bio-oils. According to the obtained results, steam pyrolysis is an alternative option for future applications in refineries.     

Starting improvement of micro-wind turbines operating in low wind speed regions

The study deals with the design and optimization of external and internal geometry of micro-wind turbines blades. A specified objective function which consists of the power coefficient and the starting time was defined and the genetic algorithm optimization technique in conjunction with the blade-element momentum theory was adopted to find the geometry of the blades including the distributions of the chord, the twist angle and also the shell thickness. Moreover, the allowable stress of the blades was considered as a constraint to the objective function. Results show that a reasonable compromise is achievable such that the starting time of the blades reduces noticeably in return for a small drop in the power coefficient. The significant improvement of the hollow blades over the solid ones indicates that the power coefficient and the starting performance could be improved through the appropriate distributions of the considered decision variables, i.e. the chord, the twist angle and also the shell thickness.     

Wind energy potential analysis for Thailand: Uncertainty from wind maps and sensitivity to turbine technology

Rapid development of wind energy has been witnessed in Thailand. However, different wind resource maps (over land) have brought great uncertainty to wind energy planning. Here, four important mesoscale wind maps were considered: DEDP (2001), World Bank (2001), Manomaiphiboon et al. (2010) of JGSEE, and DEDE (2010). The wind maps were first harmonized to a common grid at 100 m and then compared. The earlier wind maps (DEDP and World Bank) are shown to represent the lower and upper limits of predicted speed, respectively, while JGSEE and DEDE tend to be more moderate with predictions statistically closer to observations. A consolidated wind map was constructed based on their median and shown to have the best prediction performance. It was then used for the technical potential analysis, in which three large (2-MW) turbine models (two conventional and one designed for low wind speed) were considered. By GIS techniques, any land areas not feasible for large wind turbines were excluded, and the corresponding overall onshore technical potential ranges between 50 and 250 GW, depending on map and turbine model. Considering only economically feasible turbines (with capacity factors of 20%) and the median-based map, the final technical potential equals 17 GW when using the low-wind-speed model but is reduced to 5 GW with the conventional models, adequately meeting the national wind energy target of 3 GW by the year 2036. The results suggest a strong sensitivity of estimated technical potential to turbine technology and a suitability of low-wind-speed turbines for wind conditions in Thailand.     

氧化锆生产废水处理工艺

以调节沉淀-汽提处理技术作为氧化锆生产废水的处理工艺,对主要构筑物做出工艺设计,运行结果表明该工艺具有出水水质稳定、处理效率高、流程简洁、操作简便等特点.是处理含高浓度氨氮、可生化性差的工业废水的一种适用技术.     

我国石化企业节水措施探讨

归纳了目前我国石化企业节水工作的主要内容;探讨了用水管理、蒸汽凝结水回收和污水回用中的部分技术问题;介绍了节水工作的基本流程、技术特点、使用范围和应注意的问题等。