软岩隧道塌方事故致灾因素耦合分析*

为减少专家主观判断对软岩隧道塌方事故评估的影响,提出1种从事故出发逆推分析事故致灾因素耦合机制的方法。基于142个隧道施工塌方事故案例,系统总结隧道塌方事故致灾因素,对塌方事故的致灾因素出现频率进行排序;从致灾因素之间关联耦合关系出发,结合隧道施工塌方事故的多因素耦合致灾机理,研究隧道塌方事故产生过程的多因素耦合路径和耦合过程;采用N-K耦合模型开展隧道塌方事故多因素耦合路径下的耦合关联值评估,并对耦合关联值进行排序从而找到控制塌方事故发生的致灾因素组合。结果表明:除4个主要致灾因素的全耦合外,围岩岩性-降雨-地下水的耦合关联值是洞身段中最大值,为17.79%,围岩岩性-偏压-地下水的耦合关联值是洞口段中最大值,为24.02%;洞身段的围岩岩性-地下水因素和洞口段的围岩岩性-偏压因素分别对耦合关联值大小起决定影响;耦合关联值不具备叠加效应,2因素耦合关联值可能比3因素耦合关联值更大。研究结果可为提高隧道事故分析与安全防控提供科学依据。     

连续起伏管道投产过程中的气相运移研究

为应对山区液体管道在投产过程中可能出现的气阻、超压问题,从气相运移角度出发,建立液顶气模型,研究在1个U型单元内积气形成、压缩和破碎的全过程,在此基础上,提出连接各个U型单元的气相的传递函数,探讨背压累积因素下,连续起伏管道投产过程中各个U型管段的积气情况和压力的变化,进行动态的建模和计算.以国内某原油管道的现场投产数...     

基于云模型的城轨信号系统安全保障能力评价方法

为准确评价城轨信号系统安全保障能力及影响因素,基于云理论对定性与定量因素的良好融合优点,构建城轨信号系统安全保障能力评价云模型及评价指标体系,采用组合赋权法对各指标赋予权重,并基于专家意见,利用正向云发生器生成标准云.结果表明:该云模型具有一定稳定性和可靠性,可对城轨信号系统安全保障能力进行有效测评,同时能够发现安全运...     

Risk factors associated with truck-involved fatal crash severity: Analyzing their impact for different groups of truck drivers

Introduction: Fatal crashes that include at least one fatality of an occupant within 30 days of the crash cause large numbers of injured persons and property losses, especially when a truck is involved. Method: To better understand the underlying effects of truck-driver-related characteristics in fatal crashes, a five-year (from 2012 to 2016) dataset from the Fatality Analysis Reporting System (FARS) was used for analysis. Based on demographic attributes, driving violation behavior, crash histories, and conviction records of truck drivers, a latent class clustering analysis was applied to classify truck drivers into three groups, namely, ‘‘middle-aged and elderly drivers with low risk of driving violations and high historical crash records,” ‘‘drivers with high risk of driving violations and high historical crash records,” and ‘‘middle-aged drivers with no driving violations and conviction records.” Next, equivalent fatalities were used to scale fatal crash severities into three levels. Subsequently, a partial proportional odds (PPO) model for each driver group was developed to identify the risk factors associated with the crash severity. Results' Conclusions: The model estimation results showed that the risk factors, as well as their impacts on different driver groups, were different. Adverse weather conditions, rural areas, curved alignments, tractor-trailer units, heavier weights and various collision manners were significantly associated with the crash severities in all driver groups, whereas driving violation behaviors such as driving under the influence of alcohol or drugs, fatigue, or carelessness were significantly associated with the high-risk group only, and fewer risk factors and minor marginal effects were identified for the low-risk groups. Practical Applications: Corresponding countermeasures for specific truck driver groups are proposed. And drivers with high risk of driving violations and high historical crash records should be more concerned.     

An in-depth analysis of self-reported cycling injuries in single and multiparty bicycle crashes in Denmark

Introduction: Cycling is one of the main forms of transportation in Denmark. However, while the number of traffic crash fatalities in the country has decreased over the past decade, the frequency of cyclists killed or seriously injured has increased. The high rate of serious injuries and fatalities associated with cycling emphasizes the increasing need for mitigating the severity of such crashes. Method: This study conducted an in-depth analysis of cyclist injury severity resulting from single and multiparty bicycle-involved crashes. Detailed information was collected using self-reporting data undertaken in Denmark for a 12-month period between 1 November 2012 and 31 October 2013. Separate multilevel logistic (MLL) regression models were applied to estimate cyclist injury severity for single and multiparty crashes. The goodness-of-fit measures favored the MLL models over the standard logistic models, capturing the intercorrelation among bicycle crashes that occurred in the same geographical area. Results: The results also showed that single bicycle-involved crashes resulted in more serious outcomes when compared to multiparty crashes. For both single and multiparty bicycle crash categories, non-urban areas were associated with more serious injury outcomes. For the single crashes, wet surface condition, autumn and summer seasons, evening and night periods, non-adverse weather conditions, cyclists aged between 45 and 64 years, male sex, riding for the purpose of work or educational activities, and bicycles with light turned-off were associated with severe injuries. For the multiparty crashes, intersections, bicycle paths, non-winter season, not being employed or retired, lower personal car ownership, and race bicycles were directly related to severe injury consequences. Practical Applications: The findings of this study demonstrated that the best way to promote cycling safety is the combination of improving the design and maintenance of cycling facilities, encouraging safe cycling behavior, and intensifying enforcement efforts.     

Investigating factors affecting severity of large truck-involved crashes: Comparison of the SVM and random parameter logit model

Introduction: Reducing the severity of crashes is a top priority for safety researchers due to its impact on saving human lives. Because of safety concerns posed by large trucks and the high rate of fatal large truck-involved crashes, an exploration into large truck-involved crashes could help determine factors that are influential in crash severity. The current study focuses on large truck-involved crashes to predict influencing factors on crash injury severity. Method: Two techniques have been utilized: Random Parameter Binary Logit (RPBL) and Support Vector Machine (SVM). Models have been developed to estimate: (1) multivehicle (MV) truck-involved crashes, in which large truck drivers are at fault, (2) MV track-involved crashes, in which large truck drivers are not at fault and (3) and single-vehicle (SV) large truck crashes. Results: Fatigue and deviation to the left were found as the most important contributing factors that lead to fatal crashes when the large truck-driver is at fault. Outcomes show that there are differences among significant factors between RPBL and SVM. For instance, unsafe lane-changing was significant in all three categories in RPBL, but only SV large truck crashes in SVM. Conclusions: The outcomes showed the importance of the complementary approaches to incorporate both parametric RPBL and non-parametric SVM to identify the main contributing factors affecting the severity of large truck-involved crashes. Also, the results highlighted the importance of categorization based on the at-fault party. Practical Applications: Unrealistic schedules and expectations of trucking companies can cause excessive stress for the large truck drivers, which could leads to further neglect of their fatigue. Enacting and enforcing comprehensive regulations regarding large truck drivers’ working schedules and direct and constant surveillance by authorities would significantly decrease large truck-involved crashes.     

Investigation of injury severities in single-vehicle crashes in North Carolina using mixed logit models

IntroductionRoadway departure (RwD) crashes, comprising run-off-road (ROR) and cross-median/centerline head-on collisions, are one of the most lethal crash types. According to the FHWA, between 2015 and 2017, an average of 52 percent of motor vehicle traffic fatalities occurred each year due to roadway departure crashes. An avoidance maneuver, inattention or fatigue, or traveling too fast with respect to weather or geometric road conditions are among the most common reasons a driver leaves the travel lane. Roadway and roadside geometric design features such as clear zones play a significant role in whether human error results in a crash. Method: In this paper, we used mixed-logit models to investigate the contributing factors on injury severity of single-vehicle ROR crashes. To that end, we obtained five years' (2010–2014) of crash data related to roadway departures (i.e., overturn and fixed-object crashes) from the Federal Highway Administration's Highway Safety Information System Database. Results: The results indicate that factors such as driver conditions (e.g., age), environmental conditions (e.g., weather conditions), roadway geometric design features (e.g., shoulder width), and vehicle conditions significantly contributed to the severity of ROR crashes. Conclusions: Our results provide valuable information for traffic design and management agencies to improve roadside design policies and implementing appropriately forgiving roadsides for errant vehicles. Practical applications: Our results show that increasing shoulder width and keeping fences at the road can reduce ROR crash severity significantly. Also, increasing road friction by innovative materials and raising awareness campaigns for careful driving at daylight can decrease the ROR crash severity.     

大型公园道路网络关键节点脆弱性评价

为更加科学有效地辨识景区道路网络中的客流关键节点,以节点脆弱性为度量指标,提出1种基于FIM模型的关键节点脆弱性评价方法.以某大型公园为例,首先通过ArcGIS软件将该公园的道路网络信息转换成可编译的文本信息,经过Java枚举可行路径,然后利用嵌入FIM算法的Lingo进行优化,得出网络节点的重要度.最后综合节点容量、...     

基于多智能体建模方法的人群应急疏散模型构建研究——以腾龙芳烃（漳州）有限公司“4·6”爆炸着火重大事故疏散为例*

为从更微观角度分析人群疏散过程中疏散行为及路网设计对疏散效果的影响,基于腾龙芳烃（漳州）有限公司“4·6”爆炸着火重大事故,构建多智能体人群应急疏散模型,模拟人群中个体群组、惯性、就近、从众、信息传播的行为决策及相互交互影响。结果表明:群组行为会严重影响应急疏散效果,在疏散路网两端避难所附近会出现明显拥堵现象,在疏散路网设计和避难所选择时,应尽可能避免出现极端汇流路段或节点;在应急培训中,应告知群众减少群组行为。研究结果可为人群应急疏散提供借鉴。