新型高效催化氧化技术的应用试验

采用新型高效催化氧化技术,在室内小试的基础上,将研究成果直接用于盘锦大兴化工有限公司高浓度COD的化工废水处理工程。     

儿童对不同形状字体警示语标识的眼动特征

为研究儿童对不同形状字体警示语标识的视觉注意特征,将字体形状为单一变量的警示语标识图片作为视觉刺激材料,利用Eye-Link Ⅱ型眼动仪记录了30名小学生观看这些图片时的注视点个数和首次注视时间等试验数据,用SPSS分析了注视点个数和首次注视时间,基于视觉注意理论结合主观调查问卷结果表明:1)被试者对黑体字体注意程度最大;2)儿童对不同形状字体警示语标识的注意程度由大到小为黑体、隶书、宋体(楷体)、幼圆.     

Age- and Sex-Specific Thorax Finite Element Model Development and Simulation

Objective: The shape, size, bone density, and cortical thickness of the thoracic skeleton vary significantly with age and sex, which can affect the injury tolerance, especially in at-risk populations such as the elderly. Computational modeling has emerged as a powerful and versatile tool to assess injury risk. However, current computational models only represent certain ages and sexes in the population. The purpose of this study was to morph an existing finite element (FE) model of the thorax to depict thorax morphology for males and females of ages 30 and 70 years old (YO) and to investigate the effect on injury risk.

Methods: Age- and sex-specific FE models were developed using thin-plate spline interpolation. In order to execute the thin-plate spline interpolation, homologous landmarks on the reference, target, and FE model are required. An image segmentation and registration algorithm was used to collect homologous rib and sternum landmark data from males and females aged 0–100 years. The Generalized Procrustes Analysis was applied to the homologous landmark data to quantify age- and sex-specific isolated shape changes in the thorax. The Global Human Body Models Consortium (GHBMC) 50th percentile male occupant model was morphed to create age- and sex-specific thoracic shape change models (scaled to a 50th percentile male size). To evaluate the thoracic response, 2 loading cases (frontal hub impact and lateral impact) were simulated to assess the importance of geometric and material property changes with age and sex.

Results: Due to the geometric and material property changes with age and sex, there were observed differences in the response of the thorax in both the frontal and lateral impacts. Material property changes alone had little to no effect on the maximum thoracic force or the maximum percent compression. With age, the thorax becomes stiffer due to superior rotation of the ribs, which can result in increased bone strain that can increase the risk of fracture. For the 70-YO models, the simulations predicted a higher number of rib fractures in comparison to the 30-YO models. The male models experienced more superior rotation of the ribs in comparison to the female models, which resulted in a higher number of rib fractures for the males.

Conclusion: In this study, age- and sex-specific thoracic models were developed and the biomechanical response was studied using frontal and lateral impact simulations. The development of these age- and sex-specific FE models of the thorax will lead to an improved understanding of the complex relationship between thoracic geometry, age, sex, and injury risk.     

Kinetic and morphology study of alginate-vineyard pruning waste biocomposite vs. non modified vineyard pruning waste for dye removal

In this work a comparative bioadsorption study between a biocomposite consisting of hydrolysed vineyard pruning waste entrapped in calcium alginate spheres and non entrapped vineyard residue was carried out.Results have demonstrated that the biocomposite based on lignocellulose-calcium alginate spheres removed 77.3% of dyes,while non entrapped lignocellulose eliminated only removed 27.8% of colour compounds.The experimental data were fitted to several kinetic models(pseudo-first order,pseudo-second order,Chien–Clayton model,intraparticle diffusion model and Bangham model); being pseudo-second order the kinetic model that better described the adsorption of dyes onto both bioadsorbents.In addition,a morphological study(roughness and shape) of alginate-vineyard biocomposite was established under extreme conditions,observing significant differences between hydrated and dehydrated alginate-vineyard biocomposite.The techniques used to carry out this morphological study consisted of scanning electron microscopy(SEM),perfilometry and 3D surface analysis.     

生产工艺条件对菌粉爆炸特征参数的影响

利用扫描电镜及激光粒度分析仪,探究了不同生产工艺条件下医药中间体菌粉A和菌粉B的表面形状及粒径分布,并进行了热解分析,证实上述特征参数存在一定差别。在此基础上进行了爆炸特性参数研究。研究结果表明,上述两种菌粉爆炸下限处于70~90 g/m3,最大爆炸压力峰值0.4~0.5 MPa之间,爆炸性相对较弱,但也必须引起足够的重视。与菌粉B相比,菌粉A相对安全,因此条件许可时优先采用菌粉A生产工艺流程。     

天津市典型生物质固体燃料锅炉NO、CO排放研究

针对实际运行条件下,国内生物质固体燃料燃烧过程中NO、CO排放研究不足,排放现状不清晰等问题,在天津地区选择了6台具有代表性的生物质固体燃料锅炉,在测试中燃烧其常用燃料,采用烟气分析仪Testo350对锅炉展开了气态排放研究,重点研究了其中5台生物质固体成型燃料锅炉在不同燃烧负荷下,NO和CO的排放情况,以及另1台捆烧式锅炉在正常工况下的排放情况。测试结果表明:6台生物质锅炉的NO排放浓度均在180 mg/m~3以上,CO排放浓度均高于500 mg/m~3。其中,3台炉型的固体成型燃料锅炉随着燃烧负荷的增大,NO排放浓度降低CO浓度升高,燃烧负荷控制在75%~80%可相对减少气态污染物NO、CO的排放,其余2台炉型NO、CO排放浓度随燃烧负荷的增大变化趋势与前3台相反,且燃烧负荷控制在95%左右为优;捆烧式锅炉NO排放浓度最低为182.9 mg/m~3,但CO排放浓度却高达2 243.6 mg/m~3。研究结果可为用生物质固体燃料锅炉的实际运行提供参考,从而优化生物质固态燃料的燃烧和排放。     

生命周期评价在玉米种植及深加工产品中的应用

对LCA在玉米种植环境影响研究中的目标与范围定义、清单分析、环境影响指标与计算方法、结果解释等方面的研究进行了梳理分析，其中大部分文献均对碳足迹进行了计算，CML（Institute of Environmental Sciences of the University of Leiden）、ReCiPe（许多LCA领域研究人员共同开发）和IPCC（Intergovernmental Panel on Climate Change）方法是应用最多的3种方法，经分析计算得到国外玉米种植单位产量碳足迹均值为0.50kg CO₂-eq/kg，我国的均值为0.58kg CO₂-eq/kg.同时本文也对LCA在玉米深加工产品中的研究进展进行了分析整理，对今后LCA应用于玉米种植及深加工产品中的发展方向进行了展望.     

基于代理模型的制导子弹气动外形优化设计

目的 针对传统气动外形优化设计依赖于高精度仿真耗时过长的问题，为有效提高气动优化设计的效率，提出一种基于代理模型的气动外形优化方法。方法 以12.7 mm制导子弹为研究对象，通过CFD仿真，分析尾翼收缩段长度、弹底半径和尾翼收缩扩张段交界处半径对制导子弹飞行过程中阻力系数的影响。基于代理模型技术，综合运用试验设计、参数化建模、CFD技术和四阶响应面模型，构建制导子弹气动外形优化设计代理模型，以制导子弹飞行过程中的最小阻力系数为优化目标，结合遗传算法对制导子弹外形参数进行优化。结果 对比四阶多项式响应面和Kriging模型建立的代理模型预测精度，与测试样本点CFD仿真计算结果相比，四阶响应面代理模型阻力系数预测值的平均误差为0.386%。表明四阶响应面代理模型能够有效替代CFD仿真，可用于预测不同外形参数下制导子弹的阻力系数。结论 相对于最初的制导子弹外形，制导子弹的阻力系数下降了14.59%，有效减少子弹飞行过程中的能量损失和缩短了优化时长。该方法在保证精度的前提下，减少了制导子弹的设计周期，为相关工程应用与研究提供了一定的参考。     

某污水处理厂方案设计简介

随着生活水平的不断提高,人们的环保意识正在逐渐增强,目前大中型城市建设污水处理集中设施十分普遍,但对于小城镇来说,如何选择经济、安全、稳定的污水处理工艺,是各主管部门和设计单位面临的迫切问题.虽然传统活性污泥工艺具有运行可靠、操作简便等特点,但由于其占地多、出水水质差,已不能适应当前国家越来越严格的出水水质排放标准.本文以某小型污水处理厂工艺选择为例,希望为有关人员提供借鉴.     

WATER RESOURCES INVESTIGATIONS IN WEST CENTRAL IRAN USING LANDSAT DATA1

ABSTRACT: Extensive investigations have been undertaken to determine the utility of Landsat data for detecting and analyzing hydrologic characteristics of an interior watershed of Iran that drains to Daryachehye-Namak (salt lake). This interior playa serves as the terminus for surface water discharging to it from the Karaj, Shur, Saveh, and Ghom Rivers and ground water from their underlying aquifers. These drainage systems encompass heavily populated and industrial sectors of west central Iran, including Tehran. The result of this investigation demonstrates the applicability of Landsat data for mapping and monitoring water regimen as an aid in interpreting hydrologic conditions throughout this arid region. Fluctuation of water area in a playa lake, occupying the lowest part of this closed basin, was monitored on repetitive Landsat coverage. As the result of field investigations combined with optical and digital analyses of the Landsat data, fluctuating water depths were determined in order to estimate the volume of water present in this lake during various seasons. A comparison between stream discharge rates and the estimated volume of standing water make it possible to quantitatively evaluate the hydrologic regimen and to detect the significance of ground water discharge.