Use of remote sensing for the characterization of the Mediterranean coastal environment—the case ofPosidonia oceanica

The beds ofPosidonia oceanica, a marine vascular plant species endemic to the Mediterranean, form a major Mediterranean marine ecosystem. These beds are well-developed along the sandy east coast of Corsica, where the continental shelf is wide and extends for ca. 100 km. The upper limit of this ecosystem has been mapped by means of a computer image processing technique using 1/20 000 colour photographs. One of the major problems for image processing in the marine environment is the impact of the water layer (of variable thickness and quality), which can result in variations of the spectral signature for a particular vegetation or bottom type. In an attempt to reduce the impact of this artefact, a processing technique that takes into account bathymetric factors has been tested. Cartographical data obtained for an area extending from Bastia to Solenzara are presented. In the vicinity of the mouths of coastal rivers, a systematic indentation of the upper limit of the seagrass beds has been revealed. On the basis of these results, local variations in the quality of the marine environment can be detected, in particular with regard to salinity, turbidity and/or the impact of sedimentation. The overall surface area of thePosidonia oceanica beds has also been calculated.     

形状记忆合金在土木工程中的研究与应用进展

形状记忆合金作为一种集传感和驱动于一身的新型功能材料,引起了土木工程界的广泛关注,对它的研究也日益深入,但应用尚处于起步阶段。回顾了形状记忆合金的发展过程,简单介绍了形状记忆合金的基本特性和本构模型;根据形状记忆合金在结构控制中所起的作用,分类概述了它作为被动控制器和主动控制器的研究进展以及在实际工程中的应用,重点介绍了SMA智能混凝土的研究情况;指出了当前形状记忆合金在土木工程领域研究中存在的问题,以及未来的发展方向。     

饵料对稀有鮈鲫幼鱼和成鱼生长的影响及摄食优化策略研究

在实验室适宜的饲养条件下,进行不同发育阶段的稀有鮈鲫为期30 d的摄食-生长实验,研究3种饵料在投喂量分别为鱼体湿重的3.0%、4.0%和6.0%的3种摄食水平条件下,对稀有鮈鲫幼鱼(初始湿重为(0.0749±0.02)g)和成鱼(初始湿重为(0.2603±0.06)g)的生长影响。结果表明,不同摄食水平组的稀有鮈鲫幼鱼的相对增重率和特定生长率随摄食水平的增加而增加,但饲料转化率呈下降趋势;而稀有鮈鲫成鱼的相对增重率、特定生长率和饲料转化率的变化趋势基本相同。适宜摄食水平随稀有鮈鲫体重的增加而降低,稀有鮈鲫幼鱼和成鱼的适宜饵料分别为O.S.I.微细颗粒和O.S.I.细颗粒,适宜摄食水平分别为6.0%和4.0%。     

黄花菜高产、优质栽培与加工技术

黄花菜以花蕾食用,是一种营养十分丰富的蔬菜,含有人体需要的蛋白质、维生素、多糖、钙、铁、磷等多种元素成分,是很受人们欢迎的绿色健康食品,衡阳市现种植面积达20万亩,还在逐年扩大,发展前景非常广阔．为了提高黄花菜产量和品质．本文提出了黄花菜高产,优质栽培与加工技术．表2,参5．     

Fenton试剂在处理高岭土选矿废水中的应用研究

介绍了Fenton试剂处理难降解有机废水的作用机理,初步探讨了H2O2投加量、硫酸亚铁用量及反应时间对水样处理效果的影响.结果表明:仅H2O2作用时,色度去除率达到98%以上,处理后水样色度小于5;在硫酸亚铁投加量为150mg/L时,氧化后废水的COD质量浓度只有29.62 mg/L;水样甲醛在反应10min时去除率超过99%,反应2 h后无机离子浓度大大降低.     

计算机图像处理技术在污水处理絮凝效果检测中的应用

采用图像处理技术,分析污水处理过程中投药量与絮凝图像的等效直径、分形维数和浓度特征参数之间的关系。考虑到投药自动控制的实际运行环境和实时性要求,采用Retinex算法解决光照不均现象,在图像处理主要环节上均采用小计算量算法。分析结果表明:在实际的自动控制中具有较好的实用性。     

14C-Ethion residues in soybean seeds: metabolic pathway,effect of processing,bioavailability, toxicity and protective action of artichoke leaf powder towards rats

The metabolic fate of ethion labeled with ¹⁴C-at the ethyl ester groups in soybean seeds following topical application to leaves was studied. Chromatographic analysis of soybean oil revealed the presence of the parent compound together with four metabolites which were identified as ethion monooxon, ethion dioxon, O-ethyl phosphorothioate and O,O-diethyl phosphorothioate. The effect of processing on ethion residues in soybean oil was investigated. The refined oil contained small amounts of the ¹⁴C-residues originally present (37.5%). Upon feeding rats with the cake containing ethion bound residues, a substantial amount of ¹⁴C-residues was eliminated in the urine (73%), and about 6% excreted with the feces. About 5% of the radioactive residues were distributed among various organs. Mature male Wistar rats were fed on soybean seeds containing ethion residues (1.93 ppm), and on artichoke leaves powder (1% W/W) for four weeks. At the end of the experimental period, the ethion-treated group had a significantly higher alanine aminotransferase (ALT), aspartate aminotransferase (AST), alkaline phosphatase (ALP) activity, urea, creatinine, total cholesterol (TC), triglycerides (TG), and very low density lipoprotein (VLDL) levels. The ethion-treated rats also had a lower total serum protein and albumin levels, as well as acetyl cholinesterase (AChE), catalase (CAT), and glutathione-S-transferase (GST) activity as compared with controls. Moreover, concomitant treatment with artichoke leaf powder improved, at least partially, all the biochemical parameters that were altered by ethion.     

基于图像处理的湍流轴对称火焰体积与表面积计算方法

基于"圆柱体法"思想设计出轴对称火焰的火焰体积和表面积计算公式,以25cm×25cm正庚烷油池火为例,采用灰度阈值法提取其火焰区域,进而计算轴对称火焰的体积和表面积,并讨论灰度阈值对火焰区域提取、火焰体积与表面积计算的影响。结果表明:本文所述方法可以简便地计算湍流轴对称火焰的火焰体积和表面积;火焰体积与表面积随灰度阈值增大而减小且灰度阈值变化对火焰体积的影响幅度约为对火焰表面积影响幅度的两倍。     

安全科学原理及其结构体系研究

从安全科学学的高度和大安全的视角,论述5类安全现象、安全规律和安全科学及其对应关系。提出了由安全生命科学原理、安全自然科学原理、安全技术科学原理、安全社会科学原理和安全系统科学原理5大一级安全科学原理和25条二级安全科学原理组成的安全科学原理体系。分别构建了安全科学原理的"人形"结构和"轮形"结构。阐述各级安全科学原理在"人形"结构和"轮形"结构中的地位、联系、协同、促进与发展作用。研究结果得出了大安全背景下的一个安全科学原理新体系。     

ENVIRONMENTAL AUDITING: The Functional Unit in the Life Cycle Inventory Analysis of Degreasing Processes in the Metal-Processing Industry

1 and C₂ hydrocarbons (trichloroethane, trichloroethene, tetrachloroethene, dichloromethane). Measures aiming at the reduction of toxic emissions and ozone depletion potential (ODP) may possibly lead to a shift of environmental impacts towards higher energy consumption, emission of waste water, and volatile organic compounds (VOC) with photochemical oxidant creation potential (POCP). The present article concerns itself with a life cycle assessment of the three main degreasing processes in order to compare their integral environmental impacts with one another. This is supplemented by presenting the methodology of the life cycle inventory life cycle inventory analysis (LCI). Generally, the applicability of the established LCI method can be shown quite clearly. However, some difficulties arise, especially at the stage of the goal definition, as the use of the process and the functional unit cannot be pinned down as easily and neatly as for most other products. The definition of the use of the process and the functional unit is not as straightforward as for most products. Among the potential functional units identified are the mass of removed impurities, cleaning time, cleaning work, percentage of purity, throughput of parts, loads, mass or surface and virtual coefficients. The mass of removed impurities turned out to be the most suitable parameter for measuring the technical performance of degreasing processes. The article discusses background, purpose, scope, system boundaries, target group, process tree and representativeness of the present study.