基于生命周期评价的页岩气开采返排-产出水处理技术选择

为探究页岩气开采废水(即返排-产出水)处理技术对环境生态的影响,针对页岩气开采废水的处理后内部回用以及达标排放两种管理模式,结合生命周期评价的理念,运用Simapro分析工具,创建LCA模型,对典型处理技术进行清单分析,评估处理技术中的资源、能源消耗和环境负荷,量化分析其对人群健康、生态环境质量和资源方面的影响,建立一种页岩气开采返排-产出水处理技术选择的评价方法.同时,以国内某页岩气田产出水处理工程为例,评估所选用处理技术的潜在环境影响.结果表明,内部回用模式下选用的混凝-絮凝处理技术对环境生态影响最小;达标排放模式下针对有机物去除,选用铁电极的电絮凝技术或曝气生物滤池对环境生态的影响较小.对于较低含盐量的开采废水的脱盐,选用的脱盐技术正渗透对环境的影响比反渗透小,但反渗透的脱盐效果更好.对于较高含盐量开采废水的脱盐,选用的多效蒸发-机械蒸汽再压缩技术对环境生态的影响较小.     

三岔型枢纽互通事故高发匝道的形成机制与安全提升研究*

为研究高速公路三岔型互通右转匝道车辆事故的发生机制,以宜宾至叙永高速公路双桥枢纽互通为对象,运用Carsim/trucksim软件建立事故匝道的三维数字模型,模拟小客车和货柜车的运行过程,设置3种不同工况,对车辆在匝道上的动力学特性进行分析。结果表明:行驶速度升高会导致匝道路段的车辆横向偏离增大,发生侧滑或侧翻的几率增加;充分制动距离是保证车辆安全通过匝道受限路段的重要因素,货车需要更长的制动距离;道路视觉环境是影响驾驶人速度选择行为的重要因素,匝道路段与高速公路主线行驶环境的高度近似,导致驾驶人选择较高的速度进入匝道,部分车辆在小半径弯道之前无法将速度降低至安全速度,进而发生事故。本文运用行车动力学仿真和驾驶人视觉手段,在驾驶行为层面分析事故的形成机制,进而提出安全提升措施,可为匝道线形设计和交通运行管理提供科学依据。     

Elemental analysis of lightweight metal scraps recovered by an automatic sorting technique combining a weight meter and a laser 3D shape-detection system

To verify the effectiveness of a new automatic sorting technique that combines a weight meter and a laser 3D shape-detection system, elemental analysis of lightweight metal scraps generated in end-of-life vehicle (ELV) shredder facilities was conducted using a handheld XRF analyzer. According to their 3D shape and chemical composition, aluminum scraps were classified into cast alloy (Alc) and wrought alloy (Alw) fragments, and magnesium scraps were classified into irregularly shaped and rod-like fragments. The average chemical composition of a group of fragments was estimated before and after the separation test using the developed automatic sorting technique. The results show that the production of wrought aluminum alloy from the mixture of Alc and Alw fragments is not realistic because the contents of some alloying elements greatly exceed the standard values, although these alloying elements greatly decrease after the Alc fragments are separated out. For the magnesium scraps, after the rod-like magnesium fragments originating from the steering column were separated from the irregularly shaped fragments, the average chemical compositions of the rod-like products and the irregularly shaped products clearly approached the standard compositions of AM60B and AZ91D alloys, respectively. Thus, it was confirmed that the developed automatic sorting technique contributes to recycling of lightweight metal scrap in the automobile industry.     

Biogas plants efficiency in purifying Indian sago factory waste water with wide C/N ratios: strategies for process water reuse

Cassava tubers produced under hot, dry and monsoon governed climate in the Salem region, Tamil Nadu, South India, consume together with the about 1000 starch extracting industries daily, 9 millions of litres of groundwater which have to be pumped from a depth of 80 m below ground level. Because of water shortage, adjacent fields are irrigated with organically highly enriched sago factories wastewater and the land becomes unproductive. One-third of the wastewater is presently channelled through a few installed biogas plants with a purification efficiency, biological oxygen demand, of only around 30%. Microbiologically and chemically analysed in- and effluents of biogas plants exhibited nutrient contents sufficient to maintain a rice crop and significantly higher population densities of fermenting bacteria and methanogenic archaea, despite C/N ratio of about 250. CO₂ and CH₄ emissions from aerobic and anaerobic incubated sago factory biogas plants in- and effluents indicated that the present purification efficiency of 30% can be further enhanced. This investigation has given clues for designing a purification system that connects the already installed biogas plants with a well-aerated, hydro-cultured, constructed wetland and a Stirling motor device for electric power gains and heat distillation, for enabling reuse of process water and saving groundwater.     

Cleaner production opportunity assessment for a milk processing facility

Possible cleaner production (CP) opportunities for a milk processing facility were examined in this study. The CP concept and its key tools of implementation were used to assess the potential CP opportunities in the facility studied. The general production process and its resulting environmental loads were investigated by taking possible CP opportunities as the basis of study. The methodology developed for CP opportunity assessment in the milk processing facility covered two major steps: preparation of checklists to assist auditing and CP opportunity assessment, and implementation of the mass-balance analysis. For mass-balance analysis, measurements and experimental analysis of the mass flows were utilized to determine the inputs and outputs. Prepared checklists were utilized to determine waste reduction options that could be implemented. Selected opportunities were evaluated considering their environmental benefits and economic feasibility. The results of the study indicated that 50% of the service water used, 9.3% of the current wastewater (WW) discharge, 65.36% of the chemical use and the discharge of 181.9 kg/day of chemical oxygen demand (COD) and 20.7 kg/day of total suspended solids (TSS) could be eliminated and 19.6% of the service water used could be recycled/reused.     

Fenton试剂在处理高岭土选矿废水中的应用研究

介绍了Fenton试剂处理难降解有机废水的作用机理,初步探讨了H2O2投加量、硫酸亚铁用量及反应时间对水样处理效果的影响.结果表明:仅H2O2作用时,色度去除率达到98%以上,处理后水样色度小于5;在硫酸亚铁投加量为150mg/L时,氧化后废水的COD质量浓度只有29.62 mg/L;水样甲醛在反应10min时去除率超过99%,反应2 h后无机离子浓度大大降低.     

电子产品加工制造企业挥发性有机物(VOCs)排放特征

根据美国EPA挥发性有机物标准检测法TO-11及TO-14/15,采用VOCs快速检测仪、Summa罐及DNPH吸附管,对我国某大型电子产品加工制造企业中不同工艺环节生产车间内部及生产线最终废气排放管道中VOCs含量水平及组分特征进行检测.结果表明,该企业涉及VOCs排放工艺中压铸车间总挥发性有机物(TVOCs)浓度为0.1~0.5 mg·m-3、机加工车间TVOCs浓度为1.5~2.5 mg·m-3、喷涂车间中TVOCs浓度为20~200 mg·m-3,各车间VOCs组分主要包括烷类、烯炔类、芳香类、酮类、酯类和醚类,共20余种.其中涂装车间内苯系物及酮类物质为主要VOCs组分,各物质浓度分别为苯0.02~0.34 mg·m-3、甲苯0.24~3.35 mg·m-3、乙苯0.04~1.33 mg·m-3、对二甲苯0.13~0.96 mg·m-3、邻/间二甲苯0.02~1.18mg·m-3、丙酮0.29~15.77 mg·m-3、2-丁酮0.06~22.88 mg·m-3、环己酮0.02~25.79 mg·m-3、甲基异丁基甲酮0~21.29mg·m-3.根据该企业生产特征及工艺数据计算,其单条生产线VOCs年排放量为14 t,整个厂区年排放量约为840 t.结合生产流程及生产工艺分析,喷涂过程中的溶剂使用是电子产品加工制造企业的VOCs主要排放来源,废气排放口是重点排放点.     

基于HHT的混凝土损伤AE信号分析新方法

介绍了HHT这一非线性、非平稳信号的处理方法。针对混凝土材料损伤所产生的声发射信号复杂的特点,提出了基于HHT的分析混凝土材料中产生的声发射信号的新方法,借此分析了从预应力混凝土梁在三点弯曲载荷下的破坏实验中拾取的实际AE信号,获得了该损伤信号的Hilbert谱。通过与小波分析结果的比较,显示出该方法具有处理精度高、自适应性强的特点,能有效地提取声发射信号中损伤成分的主要特征,为AE信号处理提供了一种新的途径。     

铁磁形状记忆合金研究进展与展望(Ⅱ):本构模型

阐述了铁磁形状记忆合金(Ferromagnetic Shape Memory Alloy,简写为FSMA)本构模型研究的重要性.以时间为顺序,重点介绍了FSMA本构模型研究的发展历程和研究现状.仔细分析了各种FSMA本构模型在理论基础、适用范围、精度以及复杂程度等方面的特点,讨论了各种理论应用于FSMA本构模型的局限性...     

富含Cd、Pb植物焚烧处理方法的探讨

植物修复技术在重金属污染土壤修复领域有着良好的应用前景，而焚烧被认为是针对收获植物的一种有效后处理手段。采用富含Cd、Pb的野生植物铁芒萁(Dicranopteris pedata)，在450、650、850℃不同温度下进行了焚烧模拟试验，对焚烧过程中的灰分、Cd及Pb残留量的变化情况进行了探讨。结果表明，铁芒萁的灰分残留量可以降到10％以下，Cd、Pb在灰化过程中均有很大损失，直接利用底灰来进行Cd、Pb的冶炼回收不可行，烟气中的Cd、Pb可能产生二次污染，应采取措施加以防治。