Technological innovation paths toward green industry in China

With the environmental carrying capacity reaching its limits and the decreasing margin benefits of traditional production factors, the green transformation and green development through technological innovations has been a major direction for the future development of Chinese industries. However, the characteristics and heterogeneities of various types of industries call for different approaches regarding technological innovations. How to choose the most effective mode of technological innovation according to the characteristics of a certain industry has been a key issue. This paper measures the green total factor productivity of 32 industrial trades using the Slacks Based Measure(SBM)-DDF method. The effects of three innovation modes in the green transformation of industrial industry, including the independent innovation(Ⅱ), the technology introduction(TI), and the government support(GS), are empirically analyzed based on industry heterogeneity. Results indicate that the green total factor productivities of different industries show significant differences if taking into account the energy input and the undesirable output of pollutant emissions. The green total factor productivities of traditional high input,high pollution, and high energy consumption industrial trades were significantly lower than those with obvious green features. The year of 2009 is a leap year for the industrial green transformation in China. For resource-intensive industries, the II and the GS are the important ways to achieve green transformation. For labor-intensive industries, the TI is the best path to achieve green transformation, while for technology-intensive industries, the II is the primary driving force for the promotion of green developments. In addition, the innovation-compensating effect of the current Chinese environmental regulations to the resource-intensive industries has been revealed. Improving the overall scale and the industrial concentration of the industries is also beneficial for the green transformation of the industries.     

Quantification of nitrogen in the liquid fraction and in vitro assessment of lysine bioavailability in the solid fraction of soybean meal hydrolysates

Soybean meal (SBM) is a product generated from the manufacture of soybean oil and has the potential for use as a source of fermentable sugars for ethanol production or as a protein source for animal feeds. Knowing the levels of nitrogen available from ammonium is a necessary element of the ethanolic fermentation process while identifying the levels of essential amino acids such as lysine is important in determining usage as a feed source. As such the purpose of this study was to quantify total nitrogen and ammonium in the liquid fraction of hydrolyzed SBM and to evaluate total and bioavailable lysine in the solid fraction of the hydrolyzed SBM. The effects of acid concentration, cellulase and β-glucosidase on total and ammonium nitrogen were studied with analysis indicating that higher acid concentrations increased nitrogen compounds with ammonium concentrations ranging from 0.20 to 1.24 g L^?1 while enzymatic treatments did not significantly increase nitrogen levels. Total and bioavailable lysine was quantified by use of an auxotrophic gfpmut3 E.coli whole-cell bioassay organism incapable of lysine biosynthesis. Acid and enzymatic treatments were applied with lysine bioavailability increasing from a base of 82% for untreated SBM to up to 97%. Our results demonstrated that SBM has the potential to serve in ethanolic fermentation and as an optimal source essential amino acid lysine.     

基于因子分析法优选河流水体中氮浓度预测方法的研究

定量的河流水体中氮浓度预测方法有很多种,如何优选出预测精度较高的方法一直是学术界多年来致力于研究的重点。本研究采用因子分析法对预测方法的精度评价指标进行分析,并建立了预测方法精度的评价模型,对回归分析法、神经网络法、灰色系统法和增长率统计法4种水体氮浓度预测方法进行综合评估,优选出精度较高的河流水体氮浓度预测模型——BP神经网络预测模型。结果表明,此评估模型对类似研究具有一定的参考价值,能为选择出合适的河流水体氮浓度预测方法提供依据。     

可用于水体污染控制的氨氮转化菌筛选及部分降解特性的实验研究

从南京禄口水产养殖基地淡水鱼塘取淤泥作为分离菌株的土源,采用选择性富集培养法,从中分离到能以硫酸铵为氮源的菌株7株,对7个菌株进行氨氮降解实验,它们氨氮转化率分别为14.8%、19.7%、53.4%、94.2%、29.1%、63.5%和41.7%,其中AN-4菌株的转化率最高且生长良好。通过AN-4菌株16S rRNA基因序列分析以及生理生化方法,鉴定此菌株为克雷伯氏菌属(Klebsiellasp.)。对菌株AN-4转化氨氮的特性及温度、pH值、氨氮初始浓度和菌株接种量对其氨氮转化率的影响研究,结果表明,菌株AN-4降解氨氮的最适条件为:温度为30℃和pH值为8.0;当氨氮初始浓度为30mg/L时,AN-4菌株在24 h内的氨氮降解率可达85%以上,且能耐受高达200 mg/L的氨氮浓度;AN-4活化菌液浓度为108cfu/mL,当接种量为3×106cfu/mL时,AN-4菌株在24 h内的氨氮降解率为87.75%。综合上述结果,符合淡水养殖水环境条件,说明AN-4菌株适合在水产养殖中应用,为将菌株AN-4应用于水产养殖环境修复提供了理论依据。     

ASBBR-二级SBBR-化学除磷组合工艺处理榨菜腌制废水

针对榨菜腌制废水高盐高氮磷高有机物浓度的特征,提出"厌氧序批式生物膜反应器(ASBBR)-二级序批式生物膜反应器(SBBR)-化学除磷"组合处理工艺,在前期对组合工艺中单元工艺的关键工况参数研究的基础上,考察组合工艺的处理效能。实验结果表明,采用该组合工艺,可使进水COD、NH4+-N、TN及PO43--P分别为10 000、345、550和38.5mg/L的榨菜腌制废水,处理出水COD、NH4+-N、TN及PO43--P分别达到93.6、12.3、18和0.1 mg/L,去除率分别为99.1%、96.4%、96.7%和99.9%,出水达到污水综合排放一级标准。     

限氮和限磷对活性污泥合成聚羟基烷酸的影响

聚羟基烷酸(PHA)是微生物在不平衡营养条件下贮存的一种胞内聚合物,限磷和限氮两种方式均有助于活性污泥中的混合菌群合成PHA,研究考察了两种不同方式下活性污泥合成PHA的情况。实验结果表明,当C∶N为125时,活性污泥中PHA的合成量达到细胞干重的59%;当C∶P为750时,活性污泥积累的最大PHA含量占细胞干重的37%,说明限氮和限磷两种方式对活性污泥合成PHA均有很大影响,且限氮方式更有效。     

PEM式臭氧消毒在地上游泳池水处理中的应用

采用臭氧法水处理系统对地上游泳池的循环水进行灭菌消毒,研究了臭氧用量、循环水流量和运行时间等因素对臭氧法灭菌效果的影响。结果表明,3组PEM臭氧发生器应用于21.2 m3的地上游泳池,在4 m3/h的循环水流量下运行12 h后,水中的细菌总数与大肠杆菌群数达到国家标准,去除率均在99%以上。与盐电解法水处理系统相比较,臭氧法水处理系统的优势在于:杀菌快速高效、出水水质的理化指标较好和运行费用低廉。     

污水深度处理流程对污染物去除效果评价方法

城市污水再生处理流程大多采用几种深度处理单元组合而成,由单个处理单元对污染物的去除效果来准确评价组合流程整体的处理效率对于工艺方案的确定和实际运行具有重要意义。在对处理过程中污染物浓度分布变化分析的基础上,建立了污水深度处理流程污染物去除效果的评价分析方法,并根据3种常用再生处理单元的实验结果,以总大肠菌群为例,评价了混凝沉淀过滤与生物活性炭和超滤联用处理流程对总大肠菌群的去除效果,计算结果表明,这种评价分析方法是准确可行的。     

Deposition of reactive nitrogen during the Rocky Mountain Airborne Nitrogen and Sulfur (RoMANS) study

Increases in reactive nitrogen deposition are a growing concern in the U.S. Rocky Mountain west. The Rocky Mountain Airborne Nitrogen and Sulfur (RoMANS) study was designed to improve understanding of the species and pathways that contribute to nitrogen deposition in Rocky Mountain National Park (RMNP). During two 5-week field campaigns in spring and summer of 2006, the largest contributor to reactive nitrogen deposition in RMNP was found to be wet deposition of ammonium (34% spring and summer), followed by wet deposition of nitrate (24% spring, 28% summer). The third and fourth most important reactive nitrogen deposition pathways were found to be wet deposition of organic nitrogen (17%, 12%) and dry deposition of ammonia (14%, 16%), neither of which is routinely measured by air quality/deposition networks operating in the region. Total reactive nitrogen deposition during the spring campaign was determined to be 0.45 kg ha⁻¹ and more than doubled to 0.95 kg ha⁻¹ during the summer campaign.     

水解酸化-A2O污泥减量工艺的运行性能研究

生物处理单元采用水解酸化、多级串联接触曝气、连续流的除磷脱氮A2／O工艺,并辅以外排厌氧富磷污水侧流除磷,开发了一个新型的具有强化除磷脱氮功能的污泥减量HA—A／A—MCO工艺。用该工艺处理校园生活污水发现,在SRT60d、进水COD316～407mg／L、NH4＋-N30～40mg／L、TN35～53mg／L、TP8—12mg／L的条件下,出水COD≤18mg／L、NH4＋-N≤2．1mg／L、TN≤10．3mg／L、TP≤0．44mg／L。研究还发现,水解酸化池处理产生的VFA能有效促进生物除磷脱氮,导致厌氧释磷量达57mg／L,进入化学除磷池的侧流液量仅相当于进水量的13％;系统最主要的脱氮形式是SND和缺氧反硝化,SND脱氮占脱氮总量的50％,缺氧反硝化占26％;HA-A／A—MCO系统有效实现了生物相分离,并利用生物捕食作用获得较低的污泥产率,0．1gMLSS／gCOD。