Leaching behavior of heavy metals from municipal solid waste incineration bottom ash and its geochemical modeling

With the increase in the number of municipal solid waste incineration (MSWI) plants constructed in China recently, great attention has been paid to the heavy metal leaching toxicity of MSWI residues. In this study, the effects of various parameters, including extractant, leaching time, liquid-to-solid ratio, leachate pH, and heavy metal content, on the release properties of Cd, Cr, Cu, Ni, Pb, and Zn from MSWI bottom ash were investigated. Partial least-squares analysis was employed to highlight the interrelationships between the factors and response variables. Both experimental research and geochemical modeling using Visual MINTEQ software were conducted to study the pH-dependent leaching behavior of these metals in fresh and weathered bottom ash, considering precipitation/dissolution and surface complexation reactions (adsorption by hydrous ferric oxide and amorphous aluminum oxide/hydroxide). The results showed that leachate pH was the predominant factor influencing heavy metal leachability. The leaching of Cu, Pb, and Zn was mainly controlled by precipitation/dissolution reactions, whereas surface complexation had some effect on the leaching of Cr, Cd, and Ni for certain pH ranges. The modeling results aggreed well with the experimental results. Part of this work was presented at the Fourth International Conference on Combustion, Incineration/Pyrolysis and Emission Control (i-CIPEC)     

Optimal Design of a Multi-Pollutant Air Quality Monitoring Network in a Metropolitan Region Using Kaohsiung, Taiwan as an Example

An air quality monitoring network (AQMN) usually performs the basic function of assessment of regional air quality and demonstration of compliance with ambient air quality standards in an urban area. Different pollutants, however, may present different characteristic variabilities due to their specific emission patterns, rates of diffusion, and transport and transformation behaviors. But the costs of siting in a pollutant-specific monitoring network would be higher than that for a common network with respect to several pollutants monitored simultaneously. This paper presents a survey of multi-pollutant design principles and optimal searches for siting patterns of an AQMN using both simulation and optimization models as a combined tool. While conservative, quasi-stable, and reactive pollutants are considered in the design principles, cost, coverage effectiveness, and spatial correlation characteristics are included in the multi-criteria decision making process. For illustrative purpose, a series of technical settings and two types of objectives were examined in the case study for the city of Kaohsiung in Taiwan.     

Agricultural Chemicals in the Alluvial Aquifer of a Typical County of the Arkansas Delta

Statistical methods and a Geographic Information System (GIS) were used to investigate potential indicators of ground water vulnerability to agricultural chemical contamination in a representative area of the Mississippi River alluvial aquifer. A total of 47 wells were sampled for analysis of nitrate, phosphorus, potassium, and 13 pesticides commonly-used in the area. Ten soil and hydrogeologic variables and five ground water vulnerability indices were examined to explain the variations of chemical concentrations. The results showed that no individual soil or hydrogeologic variables or their linear combinations could explain more than 25% of the variation of the chemical concentrations. A quadratic response surface model with the values of confining unit thickness, slope, soil permeability, depth to ground water, and recharge rate accounted for 62% of the variation of nitrate, 43% of P, and 83% of K, suggesting that the interactions among soil and hydrogeologic variables were significant. Observed trends of decreasing nitrate and P concentrations with increasing well depth and/or depth to ground water seemed to correlate with carbonate equilibrium in the aquifer and more reduced environment with depth. In view of uncertainties involved, it was recognized that the limitations associated with input data resolution used in GIS and the formulation of leaching indices limited their use for predicting ground water vulnerability. Misuse of pesticides could be another factor that would complicate the relationships between pesticide concentrations and the vulnerability indices.     

大气颗粒物样品中有机碳和元素碳的测定

采用元素分析仪测定大气颗粒物样品中有机碳、元素碳。应用商业化仪器元素分析仪 ,在燃烧炉温度为 4 50°C时 ,一步测出样品中有机碳的含量 ;再运用加酸的方法除去样品中的碳酸盐 ,然后在燃烧炉温度为 950°C时测出样品中有机碳、元素碳含量之和。通过差减计算 ,得出元素碳的值。有机碳、元素碳测量的标准偏差平均值分别为 0 2 5%、0 50 %。     

不同采样方法测算结果的分析与比较

通过瞬时采样、等时采样、等比例采样测算结果的分析和比较 ,说明用等比例采样法采集水样并核定出污染物的排放总量 ,解决了水样的代表性问题。     

空气中总悬浮颗粒物的X射线衍射定性分析研究

以天津市环境监测中心采集的空气中总悬浮颗粒物（ＴＳＰ）膜（９７１０１２号）为样品,使用日本理学Ｄ／ｍａｘＲＡＸ射线衍射仪对其进行化合物定性分析,并介绍样品的采集与制样方法、仪器测试条件。最后通过ＪＣＰＤＳＩＣＤＤ（国际粉末衍射数据中心）标准数据库检索出该样品所含的全部化合物     

城市空气质量周报效用分析

介绍了世界上一些发达国家的空气污染预报的做法和采取的措施,阐述了我国开展空气质量预报的方针和方法,指出了周报是预报的基础工作。叙述了我国空气质量周报的污染参数的选取、污染指数的分级及其浓度限值和污染指数计算及确定,分析并总结了开展城市空气质量周报所发挥的效用是提高公众的环保意识,加大了治理污染的力度,转变了环境监测的职能,促进了环境监测事业的发展     

B—P网络逐步聚类法在环境测点优选中的应用

将Ｂ－Ｐ网络原理与逐步聚类分析思想相结合,用于环境测点聚类优选。该方法用于水清河几个监测断面的优选结果是符合客观实际的。     

南方土壤酸沉降敏感性研究Ⅷ.盐基离子淋溶的多因素分析

在模拟酸雨条件下土壤盐基离子淋溶特性研究的基础上,采用生成分分析及多元回归分析方法研究了土壤盐基淋溶的影响因子．结果表明,通过主成分分析方法可将选取的15个原始变量综合成为2个主成分,为进一步分析盐基释放量与土壤理化性质之间的关系提供了方便．影响盐基释放量的主要因子有土壤原始pH值、可交换性盐基含量、蒙脱石含量、活性氧化物、1.4nm矿物等,它们表现出效应,而高岭石和可交换性铝含量表现出负效应．利用主成分分析的结果进行多元回归分析,可得到土壤累积盐基释放量与2个主成分之间的回归方程．