Development of heat transfer and evaporation model of LNG covered by Hi-Ex foam

Natural gas is a kind of clean, efficient green energy source, which is used widely. Liquefied natural gas (LNG) is produced by cooling natural gas to −161 °C, at which it becomes the liquid. Once LNG was released, fire or explosion would happen when ignition source existed nearby. The high expansion foam (Hi-Ex foam) is believed to quickly blanket on the top of LNG spillage pool and warm the LNG vapor to lower the vapor cloud density at the ground level and raising vapor buoyancy. To identify the physical structure after it contacted with LN₂ and to develop heat transfer model, the small-scale field test with liquid nitrogen (LN₂) was designed. In experiment, three layers including frozen ice layer, frozen Hi-Ex layer and soft layer of Hi-Ex foam were observed at the steady state. By characterizing physical structure of the foam, formulas for calculating the surface of single foam bubble and counting foam film thickness were deduced. The micro heat transfer and evaporation model between cryogenic liquid and Hi-Ex foam was established. Indicating the physical structure of the frozen ice layer, there were a certain number of icicles below it. The heat transfer and evaporation mathematical model between the frozen ice layer and LNG was derived. Combining models above with the heat transfer between LNG, ground and cofferdam, the heat transfer and evaporation mathematical model of LNG covered by Hi-Ex foam was developed eventually. Finally, LN₂ evaporation rate calculated by this model was compared with the measured evaporation rate. The calculated results are 1.2–2.1 times of experimental results, which were acceptable in engineering and proved the model was reliable.     

金属尖化前缘模型主动式热疏导性能试验研究

目的为了更好地解决高超声速飞行器舵、翼前缘及头锥等气动热环境恶劣区域的热防护问题。方法采用主动式热疏导技术,以高温液态合金为工质,设计并制作具有主动式热疏导功能的尖化前缘金属试验模型(R=5 mm)。根据模型外尺寸设计加工一套石英灯仿形加热器和热流测试模型,开展地面热环境模拟试验。结果试件在前缘中心温度530℃左右时具有瞬态启动特性。前缘中心和大面积中心最大辐射热流密度分别为1000 kw/m^2和580 kw/m^2,试件在该环境中长时间受热状态下仍具有较好的热疏导能力。试验后试件无工质泄漏和结构破坏,具有一定的可重复使用性。结论可以此热疏导方式结合现有成熟热防护技术进一步开展工程设计与应用。     

极低风速条件下水-气界面甲烷气体传输速率分析

薄边界层理论被广为用来计算水-气界面气体通量,而气体传输速率(k600)则是其中的关键性环境因子.为了研究极低风速下小型浅水湿地水-气界面甲烷气体传输速率,以宜昌饮用水水库梅子垭水库和周邻5个富营养化池塘为研究对象,采用静态通量箱进行了为期一年的水-气界面甲烷气体通量观测,同步监测了水环境因子和气象因子.野外监测时的风速(U10)范围为0~0.75 m·s~(-1),平均值约为0.19 m·s~(-1);水温(Tw)变化范围为6.3~30.9℃,平均值约为19.3℃.结果表明,梅子垭水库和周边5个池塘水-气界面甲烷气体传输速率较小,在0.20~1.99 cm·h~(-1)之间变化,平均值约为0.50 cm·h~(-1).本研究利用表层水温和风速指标两个参数的双二次项模型和二次项加幂函数模型,回归得到了气体传输速率的数学公式,回归结果与原始数据和对k600进行深度平均(bin-averaged)后的数据均存在极显著性关系.     

基于转运站满负荷的北京市新东西城区生活垃圾物流优化方案研究

北京市新东城和新西城成立后迫切需要对现有生活垃圾物流方案进行优化,实现生活垃圾资源化处理.以北京市东西城区生活垃圾为研究对象,利用统计预测模型和GIS空间分析技术与方法,在分析了4个老城区生活垃圾产生量及所属密闭清洁站垃圾流向和流量基础上,提出了基于满负荷运行的三大转运站(马家楼、小武基和大屯)生活垃圾等距离收集运输优化物流模式,分析了现状及新物流模式下生活垃圾物料平衡.结果表明,与现状收集模式相比,等距离优化物流模式可使清运距离减少约9.3×105km.a-1,与现状相比减少10%;同时,基于三大转运站满负荷运转的,部分考虑海淀、丰台和朝阳区跨区运行的生活垃圾优化物流模式下,且充分利用现有的处理处置设施,可减少原生垃圾填埋量约28.3%.在优化模式的基础上若北京市正筹建的3座垃圾焚烧厂建成后,可使新东西城区生活垃圾焚烧、生化、填埋比例由现状1∶4.8∶4.2,达到3.8∶4.5∶1.7,可基本接近北京市2015年生活垃圾焚烧、堆肥和填埋比例达到4∶3∶3规划目标.     

漳江调水工程水质目标可达性研究

针对峰头水库和漳江干流,分别建立零维水质模型和一维非稳态水量水质数学模型,并对参数进行率定。对9种不同调水方案实施后漳江流域近期(2015年)和远期(2020年)水质情况进行预测,结果表明:随着调水量和排污量的增加,漳江水质远期差于近期,且取水口越往漳江下游设置,调水对漳江水质的影响越小;总体上调水对漳江水质影响不大,调水后漳江水质达到地表水Ⅲ类水标准;漳江调水工程从对水质影响方面来说是可行的。     

三岔河沿岸植物铅、镉富集特性的研究

以紫茎泽兰（EupatoriumadenophorumSpreng）、青蒿（HerbaArtemisiaeAnnuae）、三叶鬼针草（Bidenspilosa）、野牡丹（MelastomaAfffine D．Don）、光叶蕨（Knuiwatsukiacuspidata）为例,分别在河边、路边、山上和污水灌溉的旱地4个采样点采取5种植物的根部和茎叶,测量重金属元素Pb、Cd的含量、富集系数和转移系数并分析数据。结果表明,各种植物不同器官在不同环境中对重金属元素Pb、Cd的富集和转移水平各不相同,就平均水平来说三叶鬼针草对重金属Pb、Cd的富集系数较大,转移系数也高,但其对Pb的转移量明显高于Cd的转移量;紫茎泽兰对重金属元素Cd的富集和转移速度相对高于其它4种植物,说明紫茎泽兰对Cd的吸收和转移比较快,可作为受镉污染土壤进行改良的备选植物种。     

基于人体皮肤热模型的热防护服评价方法研究

在热防护服热防护性能测试装置基础上,用自行研制的新型耐高温模拟皮肤传感器代替铜片热流计测量通过应急热防护服装面料的热流量,将热流量作为热波皮肤模型边界条件,得到人体皮肤表层下80μm处的温度值,从而得到一定条件下人体真实皮肤达到二级烧伤所需时间,用其评价热防护服用织物的热防护性能,并将热波皮肤模型(TWMBT)的测试值与Pennes模型以及铜片热流计的测试结果进行分析比较。采用热波皮肤模型分析织物层下的"皮肤"防热时间更接近实际皮肤达到二级烧伤时间值,可较为精确的量化织物热防护性能,为应急救援热防护服装的热设计提供理论依据。     

生物炭输入对土壤污染物迁移行为的影响

重点综述了生物炭输入对土壤中污染物的吸附固持作用及生物有效性的影响,分析其作为土壤添加剂消减土壤污染风险的有效性,为生物炭在土壤中的应用研究提供依据。     

Prediction of vortex height from mechanical mixing in metal matrix nanocomposite processing by means of dimensional analysis and scaling

Mechanical mixing can be used for initial dispersion and distribution of nanoparticle agglomerates in metal matrix nanocomposite (MMNC) fabrication. As vortex height increases, flow is enhanced as well as the risk of oxidate melt contamination. The goal of this study was to examine and predict vortex height using dimensional analysis while varying fluid and the angular speed of a pitched square-blade impeller. An equation proposed by Markopoulos et al. was verified for the present experimental conditions. The relevant dimensionless numbers were the Reynolds (Re), Froude (Fr) and Galilei (Ga) numbers. A modified Fr was defined (Fr*) including the shaft and blade angles of the impeller. Experiments allowed calculation of the dimensionless numbers. Two fluids, water and 50 vol% aqueous glycerine, were used. Angular clockwise speed varied from 200 to 900 rpm in 100 rpm increments. Vortex height was measured in lateral view digital images. Correlations of the dimensionless numbers yielded, first, a linear relationship of the product of dimensionless vortex height (H) and specific gravity (ρ*) with respect to Fr*. A polynomial relationship was found between H and ReFr* for each fluid. The polynomial coefficients, in turn, follow a power law behavior with respect to Ga. This allows a prediction of vortex height in other Newtonian fluids that satisfy the single-phase isothermal flow condition. Perhaps, molten aluminum used in MMNC fabrication, can be analyzed based on a simple, room temperature, low cost transparent fluid system. For the experimental conditions in this study, the equation proposed by Markopoulos et al. was valid. The predicting methodology was verified with experimental results using 25 vol% aqueous glycerine, resulting in an absolute percent error of 5.29%, comparable and lower than an error of 9.12% obtained by predicting vortex height with Markopoulos’ equation.     

不同施磷量(KH2PO4)作用对Cu、Zn在红壤中的迁移转化

为了比较不同施磷量对土壤中重金属Cu、Zn迁移转化的影响,采用土壤柱进行室内淋溶实验,研究常见的磷肥磷酸二氢钾在少量5 mg·kg-1,适量15 mg·kg-1以及过量25 mg·kg-1条件下对Cu、Zn在红壤中的淋溶效应.结果表明土壤施用磷酸二氢钾降低了土壤渗滤液的pH,不同施磷量对土壤渗滤液pH影响不大,在整个淋滤过程,渗滤液pH呈现上升的趋势.磷酸盐作用下重金属Cu在土壤中的迁移主要集中表层土壤中,而Zn逐渐向深层土壤中迁移.土壤深层渗滤液中Cu、Zn浓度均比较低,对浅层地下水的危害性不大.淋滤结束后,重金属主要以残渣态存在土壤中,重金属Cu残渣态的比例为60%左右,重金属Zn残渣态比例为40%左右.高浓度磷酸二氢钾作用下有利于重金属Zn从残渣态及有机结合态向交换态转化.