中国经济发展方式的转变动力及其作用途径

以全要素生产率增长动力作为经济发展方式的转变动力,本文采用1989-2013年4组省际面板数据经由可行广义最小二乘法实证估计了10个动力因素对全要素生产率增长率的贡献水平与作用途径。研究发现:技术创新水平、市场化水平、人力资本存量水平、异质性企业集聚水平和对外开放度的综合指数对中国全要素生产率增长率的回归估计系数分别为0.575 7,0.212 5,0.136 8,0.064 4和0.018,表明技术创新、市场化改革、人力资本积累、异质性企业集聚和对外开放是促进中国经济发展方式转变的直接动力因素。进一步的研究结果显示:技术创新和异质性企业集聚通过提高前沿技术进步率和生产效率变化率以及规模报酬收益率途径,市场化改革通过提高前沿技术进步率途径,人力资本积累与对外开放通过提高前沿技术进步率和规模报酬收益率途径,促进了中国全要素生产率增长。虽然产业结构变迁、城市化、基础设施建设、区域经济政策实施和金融发展对中国全要素生产率的增长表现为负向或拖累作用,但是,产业结构变迁与城市化能够提高前沿技术进步率,基础设施建设和区域经济政策能够提高规模报酬收益率,金融发展能够提高生产效率增长率和规模报酬收益率,这5项动力因素对促进中国全要素生产率增长的正向贡献有待提高。依据上述研究结论,本文提出尽快攻克制约生产率增长的核心技术,统筹考虑产业结构升级、城市化、基础设施建设和区域经济政策实施以及加快金融领域改革等政策建议,以期加快我国经济发展方式转变进程。     

基于安徽省土地利用变化的地形梯度效应分析

为揭示地形因素与土地利用空间格局演变的关系,以安徽省2000年、2005年以及2010年Landsat TM影像和DEM数据为数据源,利用坡向、地形起伏度、坡度变率和地形位指数多种地形因子,并结合地学信息图谱分析理论从综合角度系统研究土地利用结构时空分异格局在地形梯度上的变化特点及其规律。结果表明:1)研究区主要的土地利用类型是耕地和林地,其次是建设用地和未利用土地,且建设用地面积逐期增加趋势显著。2)2000~2010年研究区不同土地利用类型在不同地形梯度区间的分异规律存在明显差异。低地形梯度范围是耕地、水域和建设用地的优势分布区;中地形梯度范围是草地的集中分布区;林地的优势分布区集中在高地形梯度范围。3)2000~2010年研究区土地利用图谱以稳定型和后期变化型为主,低地形梯度和高地形梯度是稳定型图谱的集中分布区,中低、中高和高地形梯度范围是后期变化型图谱的优势分布区。2000~2005年林地的优势分布区有向较低地形位梯度扩张的趋势,其中,耕地是主要的转入来源。2005~2010年耕地的优势分布区有向较高地形位梯度扩张的趋势,变化模式主要为:"林地–耕地"、"未利用地–耕地"和"草地–耕地"。     

成都地区污染天气分型及其污染气象特征研究

污染天气分型研究对空气质量预报、污染源总量控制等具有重要的意义。基于2013年1月~2014年12月高空及地面天气形势划分了成都市的天气类型并探讨各天气类型下的空气质量状况及其污染天气特征,以期为空气质量预报和预警提供依据。结果表明,空气污染过程中,500 hpa环流形势主要有两槽一脊型、一槽一脊型、纬向型、槽脊同位相型等,其中两槽一脊型和槽脊同位相型控制下的空气质量最差。发生空气污染时,地面环流形势可分为高压型、高压后部型、高压底部型、低压型、低压顶部型、低压前部型、低压底部型、鞍型场型、冷锋前部型和均压场型,其中高压型、高压底部型、高压后部型控制下的空气质量最差。     

碱激发胶凝材料及其固化Pb^2＋的试验研究

对碱激胶凝材料（碱-偏高岭土、碱-矿渣和碱-粉煤灰）与水-水泥体系固化Ph^2＋进行了试验研究,其中水-水泥体系为对比样。结果表明：对于相同稠度的碱激发胶凝材料,即使Pb^2＋含量达到2．4％,除了碱-粉煤灰的抗压强度略低外,其他都达到30MPa以上,满足填埋或做建筑基材的使用要求;与水泥相比,碱激发胶凝材料能显著降低重金属离子（Ph^2＋）浸出浓度,其规律性与其NH4交换容量大小的规律性一致,与其固化体的抗压强度的大小没有相关性。     

降解丙烯酰胺的活性污泥培养及驯化研究

采用阶梯式驯化法,控制温度在18℃～24℃,pH在6—8,溶解氧在4—8mg／L,在容积为6L的驯化器中对活性污泥进行培养驯化。经过25d的培养之后,得到了稳定降解丙烯酰胺的活性污泥。驯化后的活性污泥SVI为85—132,COD去除率达70％。     

A review and test of predictive models for the bioaccumulation of radiostrontium in fish

Empirical relations between the ⁹⁰Sr concentration factor (CF) and the calcium concentration in freshwater aquatic systems have previously been determined in studies based on data obtained prior to the Chernobyl accident. The purpose of the present research is to review and compare these models, and to test them against a database of post-Chernobyl measurements from rivers and lakes in Ukraine, Russia, Belarus and Finland. It was found that two independently developed models, based on pre-Chernobyl empirical data, are in close agreement with each other, and with empirical data. Testing of both models against new data obtained after the Chernobyl accident confirms the models’ predictive ability. An investigation of the influence of fish size on ⁹⁰Sr accumulation showed no significant relationship, though the data set was somewhat limited.     

The effects of scale and spatial heterogeneities on diffusion in volcanic breccias and basalts: Amchitka Island, Alaska

Knowledge of the factors that influence the diffusion of contaminants, such as the diffusivity and the connected porosity, is crucial to modeling the long-term fate and transport of contaminants in subsurface systems with small or negligible advective flow, such as in fractured crystalline rock. Fractured rock is naturally heterogeneous, and hence, understanding the diffusivity of a molecule through this material (or the formation factor of the medium) becomes a complex problem, with critical concerns about the scale of laboratory measurements and about the spatial variability of these measurements relative to the scale needed for fate and transport modeling. This study employed both electrical and tracer-based laboratory methods to investigate the effects of scale and pore system connectivity on the diffusivity for volcanic matrix rock derived from the study site, a former underground nuclear test site at Amchitka Island, Alaska. The results of these investigations indicate a relatively well-connected pore system with scale effects generally limited to approximately 6 cm lengths and well-correlated to observed heterogeneous features. An important conclusion resulting from this study, however, is that there is a potential for the estimated diffusivity to be misrepresented by an order of magnitude if multiple samples or longer sample lengths are not used. Given the relatively large number of measurements resulting from these investigations, an analysis of the probability density function (PDF) of the diffusivity was possible. The PDF of the diffusivity was shown to generally follow a normal distribution for individual geologic layers. However, when all of the geologic layers are considered together, the distribution of the subsurface as a whole was shown to follow a lognormal distribution due to the order of magnitude differences amongst the layers. An understanding of these distributions is essential for future stochastic modeling efforts.     

Model evaluation of the phytoextraction potential of heavy metal hyperaccumulators and non-hyperaccumulators

Evaluation of the remediation ability of zinc/cadmium in hyper- and non-hyperaccumulator plant species through greenhouse studies is limited. To bridge the gap between greenhouse studies and field applications for phytoextraction, we used published data to examine the partitioning of heavy metals between plants and soil (defined as the bioconcentration factor). We compared the remediation ability of the Zn/Cd hyperaccumulators Thlaspi caerulescens and Arabidopsis halleri and the non-hyperaccumulators Nicotiana tabacum and Brassica juncea using a hierarchical linear model (HLM). A recursive algorithm was then used to evaluate how many harvest cycles were required to clean a contaminated site to meet Taiwan Environmental Protection Agency regulations. Despite the high bioconcentration factor of both hyperaccumulators, metal removal was still limited because of the plants' small biomass. Simulation with N. tabacum and the Cadmium model suggests further study and development of plants with high biomass and improved phytoextraction potential for use in environmental cleanup.     

六自由度气锤振动技术与电磁斜面振动技术比较

六自由度气锤振动与电磁斜面振动是两种模拟产品三轴振动的振动技术。由于两种振动技术的机理不同,其对样品的振动影响也会有区别。本文研究讨论两种不同振动技术的不同特点,以及对不同产品的振动效果别,我们可以根据样品特点和测试需求,选择更合适的震动技术。     

OHS风险控制方法在烟气排放控制工程中的应用

介绍了烟气排放控制工程中OHS风险控制的方法,并以香港青山“B”电厂4X680MW机组排放控制工程（CPBEC）为例,阐述了目前国内外环保项目在OHS风险管理方面的差距和改进措施。