城市环境保护中污水治理的相关问题研究

随着我国向工业型国家转型的进程加快,我国作为一个水资源贫乏的国家,水污染的问题日益突出。因此,对于我国城市污水处理问题进行研究探讨,对于实现我国可持续发展战略有着重大的意义。本文主要对目前我国城市污水处理中存在的问题进行了分析研究,并在此基础上,对我国的城市污水处理提出了一些有针对性地对策与措施。     

SCADA系统在污染物治污工况在线监控系统中的应用

本文介绍了SCADA系统在内蒙古自治区重点污染源治污工况在线监控系统中的应用,系统以西门子成熟S7—200系列可编程序控制器为在线监测设备,基于OPC（OLE for Process Control）技术,以WINCC为监控平台,实现了自治区内重点污染源企业治污工况的远程监测、污染物排放的有效管理。     

PU合成革废水治理分析

生产聚氨酯（PU）合成革的废水中含有高浓度有机物,其中N,N-二甲基甲酰胺（DMF）毒性大,难生物降解.文章阐述了合成革的生产工艺,分析该过程中DMF废水形成阶段、处理现状及其处理方法.结合各种方法的优缺点,展望了DMF废水的处理研究方向.     

含油废水处理技术

概述了含油废水的来源、特点、分类及危害,介绍了含油废水的处理方法的原理、优势及存在的问题,同时简述了各种处理方法的最新研究成果,最后提出了含油废水发展趋势。     

室内污染物污染与控制

室内空气质量问题已经成为社会各界广泛关注的问题,如何有效地控制室内污染、改善室内空气质量是目前急待解决的问题.文章介绍了室内空气污染的特点、种类和来源,以及对人体的危害,并对传统方法如污染源控制、加强通风透气、植物净化等方法进行了探讨,另外还介绍了目前几种先进的室内环境净化处理技术及各技术的优缺点,进而对室内空气净化技术的发展趋势进行了展望.     

苯酚对活性污泥活性及微型动物群落结构的影响

为了探究苯酚对污泥活性及微型动物群落结构的影响,以SBR工艺的活性污泥为研究对象,分析苯酚对污泥TTC-ETS活性、INT-ETS活性和微型动物群落结构及其动态变化的影响.结果表明,污泥TTC-ETS活性较之INT-ETS活性能够更有效表征有机毒害物质苯酚对污泥活性的影响,且随着进水苯酚浓度的增大,苯酚对污泥活性的抑制越明显:进水浓度在50mg·L-1时,苯酚对污泥活性的抑制率为(20.75±10.43)%.进水苯酚浓度为100 mg·L-1时,抑制率为(39.73±26.92)%,且波动较大.在300 mg·L-1进水运行后期,苯酚对污泥活性的抑制率稳定在40%左右;苯酚对活性污泥微型动物群落结构的影响随浓度的增大而增大,且对不同微型动物类群影响不同:在低浓度苯酚进水条件下,只有单个微型动物类群(有壳变形虫)受到明显的抑制,而当浓度增大至100 mg·L-1和300 mg·L-1时,对多个微型动物类群(固着型纤毛虫、有壳变形虫、匍匐型纤毛虫、肉食性纤毛虫等)产生抑制,对少数类群(鞭毛虫、线虫等)产生促进作用;苯酚影响下的污泥活性与微型动物之间存在一定的关联性,针棘匣壳虫(Centropyxis aculeata)、多变斜板虫(Plagiocampa mutabilis)等可作为含酚废水处理过程中污泥活性低的指示生物,湖累枝虫(Epistylis lacustris)、软波豆虫(Bodo lens)、跳侧滴虫(Pleuromonas jaculans)等可作为污泥活性高的指示生物.     

聚硅酸对不同形态铝沉积行为的影响

针对给水管网中残余铝沉积和再溶解现象可能引起的水质问题,研究了聚硅酸对不同水解聚合形态铝沉积、再溶解的影响,并以石英微晶天平为表征手段,初步探讨了聚硅酸对不同形态铝沉积、再溶解过程影响的机理.结果表明,聚硅酸能显著改变不同水解聚合形态铝的沉积、再溶解行为.聚硅酸可与3种水解聚合形态的铝迅速结合而生成可沉积产物,但产物性质不同.以单体形态为主的Al_0与聚硅酸的反应产物性质较稳定,部分以溶解态存在,部分以非溶解态(可沉积态)存在;尽管铝的两种聚合形态Al_(13)和Al_(30)与聚硅酸反应也生成了部分可沉积产物,但随着时间的推移,这些产物又逐渐向溶解态转化.铝硅比对Al_0体系中铝的沉积溶解行为影响较小,而对Al_(13)和Al_(30)影响较大,且在0.2∶20(以Al和SiO_2计的质量比)时,沉积态铝的溶解速率最快.     

Biostability in distribution systems in one city in southern China：Characteristics, modeling and control strategy

This study investigated the bacterial regrowth in drinking water distribution systems receiving finished water from an advanced drinking water treatment plant in one city in southem China. Thirteen nodes in two water supply zones with different aged pipelines were selected to monitor water temperature, dissolved oxygen （DO）, chloramine residual, assimilable organic carbon （AOC）, and heterotrophic plate counts （HPC）. Regression and principal component analyses indicated that HPC had a strong correlation with chloramine residual. Based on Chick-Watson＇s Law and the Monod equation, biostability curves under different conditions were developed to achieve the goal of HPC 100 CFU/mL. The biostability curves could interpret the scenario under various AOC concentrations and predict the required chloramine residual concentration under the condition of high AOC level. The simulation was also carded out to predict the scenario with a stricter HPC goal （≤50 CFU/mL） and determine the required chloramine residual. The biological regrowth control strategy was assessed using biostability curve analysis. The results indicated that maintaining high chloramine residual concentration was the most practical way to achieve the goal of HPC ≤ 100 CFU/mL. Biostability curves could be a very useful tool for biostability control in distribution systems. This work could provide some new insights towards biostability control in real distribution systems.     

Removal of polycyclic aromatic hydrocarbons from aqueous solution by raw and modified plant residue materials as biosorbents

Removal of polycyclic aromatic hydrocarbons （PAHs）, e.g., naphthalene, acenaphthene, phenanthrene and pyrene, from aqueous solution by raw and modified plant residues was investigated to develop low cost biosorbents for organic pollutant abatement. Bamboo wood, pine wood, pine needles and pine bark were selected as plant residues, and acid hydrolysis was used as an easily modification method. The raw and modified biosorbents were characterized by elemental analysis, Fourier transform infrared spectroscopy and scanning electron microscopy. The sorption isotherms of PAHs to raw biosorbents were apparently linear, and were dominated by a partitioning process. In comparison, the isotherms of the hydrolyzed biosorbents displayed nonlinearity, which was controlled by partitioning and the specific interaction mechanism. The sorpfion kinetic curves of PAHs to the raw and modified plant residues fit well with the pseudo second-order kinetics model. The sorption rates were faster for the raw biosorbents than the corresponding hydrolyzed biosorbents, which was attributed to the latter having more condensed domains （i.e., exposed aromatic core）. By the consumption of the amorphous cellulose component under acid hydrolysis, the sorption capability of the hydrolyzed biosorbents was notably enhanced, i.e., 6-18 fold for phenanthrene, 6-8 fold for naphthalene and pyrene and 5-8 fold for acenaphthene. The sorpfion coefficients （Kd） were negatively correlated with the polarity index [（O＋N）/C], and positively correlated with the aromaticity of the biosorbents. For a given biosorbent, a positive linear correlation between logKoc and logKow for different PAHs was observed. Interestingly, the linear plots of logKoc-logKow were parallel for different biosorbents. These observations suggest that the raw and modified plant residues have great potential as biosorbents to remove PAHs from wastewater.     

Reduction and characterization of bioaerosols in a wastewater treatment station via ventilation

Bioaerosols from wastewater treatment processes are a significant subgroup of atmospheric aerosols. In the present study,airborne microorganisms generated from a wastewater treatment station(WWTS) that uses an oxidation ditch process were diminished by ventilation.Conventional sampling and detection methods combined with cloning/sequencing techniques were applied to determine the groups,concentrations,size distributions,and species diversity of airborne microorganisms before and after ventilation. There were 3021 ± 537 CFU/m3 of airborne bacteria and 926 ± 132 CFU/m3 of airborne fungi present in the WWTS bioaerosol.Results showed that the ventilation reduced airborne microorganisms significantly compared to the air in the WWTS. Over 60% of airborne bacteria and airborne fungi could be reduced after4 hr of air exchange. The highest removal(92.1% for airborne bacteria and 89.1% for fungi) was achieved for 0.65–1.1 μm sized particles. The bioaerosol particles over 4.7 μm were also reduced effectively. Large particles tended to be lost by gravitational settling and small particles were generally carried away,which led to the relatively easy reduction of bioaerosol particles0.65–1.1 μm and over 4.7 μm in size. An obvious variation occurred in the structure of the bacterial communities when ventilation was applied to control the airborne microorganisms in enclosed spaces.