核电事故中核素气溶胶烟羽扩散的模拟研究

本文选用高斯模型对放射性气溶胶扩散特性进行了模拟研究,分析了影响气溶胶扩散的主要几何参数和气象因素,探求了放射性污染物在地面上的浓度分布,最大浓度位置以及安全范围的划分等问题.模拟研究结果与相关文献相一致,证明了高斯扩散模型对此类扩散模拟的合理性和有效性；这为全面了解放射性气溶胶扩散的特性、对快速、有效地处置核事故具有指导意义.     

Evaluating the sustainability of diets–combining environmental and nutritional aspects

This study examined two methods for jointly considering the environmental impact and nutritional quality of diets, which is necessary when designing policy instruments promoting sustainable food systems. Both methods included energy content and 18 macro- and micronutrients in the diet, the climate impact, land use and biodiversity damage potential. In Method 1, the content of different nutrients in the diet was normalised based on recommended intake or upper levels for average daily intake and presented together with the environmental impacts, which were normalised according to estimated sustainable levels. In Method 2, the nutritional quality of different diets was considered by calculating their nutrient density score, and the environmental impact was then expressed per nutrient density score. Three diets were assessed; a diet corresponding to Nordic recommendations, the current average Swedish diet and a lifestyle Low Carbohydrate-High Fat (LCHF) diet. Method 1 clearly showed that the climate impact was far beyond the sustainable level for all diets, while land use was within the sustainability limit for the recommended diet, but not the other two. Comparisons based on nutrient density scores depended on the score used, but the current and LCHF diets had more impact than the recommended diet (less livestock products) for all but one score. Over- and under-consumption of nutrients were clearly shown by Method 1 but not possible to distinguish with Method 2, as normalisation was not possible, making it difficult to evaluate the absolute scale of the impacts when nutrient density scores were used. For quantitative information on the environmental and nutritional impacts of diets as support in decision-making processes, it is important that data presentation is transparent. There is limited value in reducing results to a low number of indicators that are easy to read, but difficult to interpret, e.g. nutrient density score. Method 1 allows combined assessment of diets regarding environmental impact and nutritional intake and could be useful in dietary planning and in development of dietary recommendations and other policy instruments to achieve more sustainable food systems.     

Influence of additives in the end‐use mixes of tebufenozide on deposition,adhesion and persistence in spruce foliage

Abstract

A commercial flowable formulation of tebufenozide, RH‐5992 2F [N'‐t‐butyl‐N'‐(3,5‐dimethylbenzoyl)‐N‐(4‐ethylbenzoyl) hydrazine], was diluted with water, water and canola oil, and water and the methyl ester of canola oil, to provide six end‐use mixes with concentrations of 35 and 70 g of active ingredient (Al) litre^‐1. The mixes were applied at 70 and 140 g Al ha^‐1 over white spruce [Picea glauca (Moench) Voss] seedlings in a laboratory spray chamber and foliar concentrations of tebufenozide were determined over a 60‐d period. At intervals of time post‐spray, seedlings were sprayed with monosized droplets of Sunspray®11N as rainfall, and the amount of tebufenozide knocked off from foliage was determined. The potential energy of adhesion (PEA) of the Al particles on the foliage increased with time and varied according to the type of end‐use mix, its viscosity and the dosage sprayed.

The end‐use mixes were applied over white spruce trees under field conditions and persistence of tebufenozide was investigated. DT₅₀ values were influenced by the type of mix and dosage sprayed. Oil‐containing mixes and higher dosages increased the PEA of tebufenozide particles.     

Biomass production and carbon sequestration potential in poplar plantations with different management patterns

Biomass production and carbon storage in short-rotation poplar plantations over 10 years were evaluated at the Hanyuan Forestry Farm, Baoying County, China. Experimental treatments applied in a split-plot design included four planting densities (1111, 833, 625 and 500 stems ha(-1)) and three poplar clones (NL-80351, I-69 and I-72). Based on the model of total biomass production developed, total plantation biomass production was significantly different in the plantations. The ranking of the plantation biomass production by planting density was 1111>833 more more than 625>500 stems ha(-1), and by components was stem>root>or=branch>leaf for all plantations. At 10 years, the highest total biomass in the plantation of 1111 stems ha(-1) reached about 146 t ha(-1), which was 5.3%, 11.6% and 24.2% higher than the plantations of 833, 625 and 500 stems ha(-1), respectively. The annual increment of biomass production over 10 years differed significantly among initial planting densities and stand ages (p<0.01), but no significant difference was observed from age 7 to 10. Mean carbon concentration among all biomass components ranged from 42-50%, with the highest carbon concentrations in stems and the lowest in leaves. Over the study period, the dynamic pattern of total plantation carbon storage by planting density was similar to that of total biomass production. At age 10, the highest total plantation carbon storage in the plantation of 1111 stems ha(-1) reached about 72.0 t ha(-1), which was 5.4%, 11.9% and 24.8% higher than in the plantations of 833, 625 and 500 stems ha(-1), respectively. The annual carbon storage increment over 10 years differed significantly among initial planting densities and stand ages (p<0.01), and it showed a pattern similar to the annual biomass production increment of the plantations. The results suggest that biomass production and carbon storage potential were highest for planting densities of 1111 and 833 stems ha(-1) grown over 5- and 6-year cutting cycles, respectively. If 3- or 4-year cutting cycles are used, the planting density should be higher than 1111 stems ha(-1) (e.g., 1667 or 2500 stems ha(-1)). Based on the mean annual carbon storage for the plantation of 625 stems ha(-1), as an estimation, the mean carbon storage in the biomass of poplar plantations (excluding leaves) amounts to 3.75x10(7) t ha(-1)yr(-1) in China.     

铁电絮凝去除磷酸盐性能及影响因素研究

不同水质条件下,铁板作为阳极电絮凝时会产生不同形态的絮体,而絮体种类对磷酸盐去除效果尚不明确.利用铁板作为阳极进行电絮凝,考察溶解氧对电絮凝过程中生成絮体种类的影响,进一步研究电流密度和初始pH值对磷酸盐去除效果的影响.结果表明,低溶解氧（DO）条件下絮体成分主要为磁铁矿,高DO条件下可能为无定型三价铁氧化物/氢氧化物;电流密度越大(2.5、5和10 mA·cm^-2),磷酸盐去除效率越高,同时,低DO条件下磷酸盐去除效率高于高DO条件;而初始pH值（4、5、6、7和8）虽不影响不同溶解氧条件下所产絮体的除磷效果,但DO浓度高时,酸性条件下磷酸盐去除效率更高.当前污水处理厂二级出水存在磷浓度较高的问题(TP> 0.5 mg·L^-1),采用实际污水在2.5 mA·cm^-2电流密度下进行电絮凝,10 min后,初始浓度为1.307 mg·L^-1磷酸盐去除效率达98%以上.研究结果将为电絮凝产不同形态铁去除磷酸盐提供理论支持.     

减排增汇目标下中国粮食生产效率的测度及分布动态演进

考虑粮食生产中的净碳汇和面源污染排放,构建全局EBM模型测算2001—2018年中国30个省份及三大功能区的粮食生产效率,借助分布动态模型考察中国粮食生产效率的动态演进趋势。研究发现：（1）中国粮食生产效率总体水平不高,样本期间呈现先降低后增长的态势,主产区粮食生产效率高于主销区和产销平衡区。（2）三大功能区粮食生产效率的分布动态存在差异,主产区由“多级分化”趋向于“两级分化”,地区差距逐渐缩小;主销区分化程度有所加剧;产销平衡区“多级分化”逐渐加强。（3）中国粮食生产效率总体上存在向中高水平聚集的趋势。相比高效率省份分布流动性较强,低效率省份存在明显的“贫困陷阱”,粮食低水平发展的恶性循环不易突破。     

γ-Fe2O3抗As2O3中毒能力的分子模拟

采用密度泛函理论研究了γ-Fe₂O₃表面As₂O₃的吸附以及掺杂改性提高抗As₂O₃中毒性能的作用机理.计算了As₂O₃在完整以及O缺陷γ-Fe₂O₃（001）表面的吸附性能,包括吸附位点、吸附结构、吸附能、PDOS等.同时建立了Mo、Ti、Mg掺杂的γ-Fe₂O₃模型,探讨了助剂掺杂对抗砷中毒能力的作用机制,并考虑了掺杂量的影响.结果表明：As₂O₃倾向于以O端化学吸附在γ-Fe₂O₃（001）表面Fe_oct位,吸附过程发生强烈的相互作用和电荷转移.当表面存在O缺陷时,As₂O₃的吸附能得到提高.Mo、Ti、Mg倾向于掺杂在Fe_oct位,增强了对As₂O₃的吸附能力,并且增大Mo的掺杂量可以强化As₂O₃的吸附.As₂O₃倾向于与活性较强的Mo、Ti、Mg发生反应,从而保护活性Fe位不受砷中毒,Ti和Mg的掺杂还抑制了相邻Fe位对As₂O₃的吸附.Mo、Ti、Mg的掺杂还促进了催化剂表面对NH₃的吸附,增强了表面酸性强度,有利于SCR反应.Mo、Ti、Mg原子的掺杂有利于提高γ-Fe₂O₃催化剂的抗砷中毒性能.     

深圳市大气颗粒物分粒径有效密度及影响因素

为探究深圳市大气颗粒物分粒径有效密度变化特征及其影响因素,本文将离心颗粒物质量分析仪(CPMA)与差分电迁移粒径分析仪(DMA)联用,通过粒径筛分测定了2020年9月~2021年2月粒径范围为50~500nm的深圳市大气颗粒物分粒径有效密度.结果表明:深圳市大气颗粒物的中值有效密度范围在1.29~1.53g/cm³,颗粒物有效密度均随颗粒物粒径增加而增大,秋季有效密度略低于冬季.清洁时期,有效密度较低且观察到双峰分布,低密度颗粒物中值有效密度在0.70~0.80g/cm³范围内,表明存在新鲜排放的黑碳颗粒物,高密度颗粒物中值有效密度在1.3~1.5g/cm³范围内,介于二次无机颗粒物和有机物的材料密度之间,推测为二者混合状态.污染时期,不同粒径有效密度值增加且呈现单峰分布,表明颗粒物呈现内混态.在新粒子生成事件中,气态硝酸凝结可能是大气颗粒物后续粒径增长和有效密度增加的主要原因.     

泥石流浆体屈服应力综合表达式的研究

根据野外泥石流浆体观测试验分析,通过对不同料径沙颗粒的甘油沙浆流变试验,以及动摩擦临界浓度和极限浓度的实验研究,导出了反映泥石流浆体结构强度的屈服应力综合表达式,以便为泥石流高浓度,高速机理探讨和泥石流防治工作的设计提供科学依据的参数。     

Edge Effects and Isolation: Red-Backed Voles Revisited

Abstract:  We examined demographic responses of California red-backed voles ( Clethrionomys californicus ) to forest fragmentation in southwestern Oregon at sites where this species has previously shown negative responses to fragmentation. Voles were captured in live traps and released. Voles were rarely caught in clearcuts surrounding 11 forest fragments, but relative vole density did not decrease from the forest-fragment interiors to edges. The first result agrees with previous findings at these sites 6 years earlier, but the latter result does not. There was no evidence that vole response to edge changes with fragment age. Two years of intensive mark-recapture efforts at two forest-fragment sites and two unfragmented (control) sites did not show negative effects of fragmentation on vole survival, an important demographic rate. Vole capture probabilities varied greatly across space and time on these four sites, which may explain the differences in vole responses to edge seen between this and the previous study. These results suggest that reliable appraisal of edge effects may be difficult for many species on small fragments because the data necessary to apply population estimators require great efforts to obtain and the use of indices leads to a confounding of detection probabilities with demographic change.