Synthesis and application of lignin-based copolymer LSAA on controlling non-point source pollution resulted from surface runoff

In this article,alkali lignin separated from paper pulp waste was grafted into a novel copolymer LSAA (a copolymer of lignin,starch, acrylamide,and acrylic acid).Its practical application effect and environmental safety were studied.The results of field simulation experiment indicated that the application of LSAA significantly affected the output of the runoff and pollutants.The runoff quantity was decreased by 16.67%-47.00%and the loads of total suspended solids (TSS),chemical oxygen demand (COD),total ...     

聚季铵盐丙烯酰胺接枝共聚物治理煤泥水的应用研究

本文研究了聚季铵盐丙烯酰胺接枝共聚物PQAAM在煤泥水治理中的絮凝沉降作用,说明该絮凝剂是一种质量优良的新型高效的阳离子絮凝剂,对煤泥水治理和环境保护有着广泛的应用前景。     

聚天冬氨酸-丝氨酸接枝聚合物的合成及阻垢性能

目的研究聚天冬氨酸-丝氨酸接枝聚合物的阻垢性能。方法以聚琥珀酰亚胺为母体,以丝氨酸为接枝单体,合成出聚天冬氨酸-丝氨酸接枝聚合物(PASPSE),采用静态阻垢法分别考察了聚合时间、聚合温度、原料配比对产物阻垢性能的影响。结果聚天冬氨酸-丝氨酸接枝聚合物合成的最佳条件为聚合时间18 h、聚合温度55℃、聚琥珀酰亚胺与丝氨酸原料配比(摩尔比)为1:1。该接枝聚合物对Ca CO3垢具有良好的螯合分散作用,其Ca CO3阻垢率随温度的升高、工作时间的延长、HCO3-与Ca2+含量之比的增大而降低。在90℃高温环境下,10 mg/L PASPSE的阻垢率可达95.5%。结论在高温水系统中,PASPSE对Ca CO3垢具有较好的阻垢性能。     

改性水凝胶的制备及其对Pb2+、Cd2+吸附性能研究

采用60Co-γ射线低温辐射技术,以丙烯酸羟乙酯(HEA)和N-乙烯基甲酰胺(NVF)为共聚单体,合成了一种新型共聚物水凝胶:聚(丙烯酸羟乙酯/N-乙烯基甲酰胺)[p(HEA/NVF)],并采用三乙烯四胺(TETA)对其进行胺化改性,制得一改性水凝胶:聚(丙烯酸羟乙酯/N-乙烯基甲酰胺)-三乙烯四胺[p(H/V)-T].对制备的p(HEA/NVF)凝胶进行了SEM分析和FTIR分析,并对改性后的p(H/V)-T进行XPS分析及FTIR分析.研究了改性前后水凝胶对重金属Pb2+、Cd2+的吸附性能,改性后水凝胶对Pb2+、Cd2+的吸附动力学,以及重金属离子初始浓度、pH值等对改性凝胶吸附性能的影响,并对吸附重金属前后的水凝胶进行电子能谱分析.SEM分析表明,p(HEA/NVF)水凝胶是一种具有多孔结构的高分子材料;吸附实验结果表明,相比较p(HEA/NVF),p(H/V)-T对Pb2+的吸附量增加了700%,对Cd2+的吸附量增加了600%;p(H/V)-T对Pb2+、Cd2+的吸附量随着pH的升高而增加,吸附过程满足准二级动力学方程,并均能较好地符合Freundlich和Langmuir等温吸附模型(R2>0.95);红外分析证实,HEA和NVF已成功聚合为一新型共聚物水凝胶,且多胺基团已被成功地接于共聚物水凝胶表面;XPS分析得出,改性后水凝胶p(H/V)-T对重金属Pb2+、Cd2+的吸附机制为两者之间的螯合作用.     

Starch-plastic materials—Preparation,physical properties,and biodegradability (a review of recent USDA research)

Recent starch-plastic research at the National Center for Agricultural Utilization Research is reviewed and related worldwide efforts are noted. Properties of starch that influence its formulation and performance in plastics are discussed. Methods are given for preparation of starch-poly(methyl acrylate) graft copolymer, starch-poly(ethylene-co-acrylic acid), and starch-poly(ethylene-co-acrylic acid)-polyethylene plastics. Their physical properties are discussed, as is degradability by enzymes or amylolytic organisms from soil, ponds, and streams.The mention of firm names or trade products does not imply that they are endorsed or recommended by the U.S. Department of Agriculture over other firms or similar products not mentioned.     

Reactive Extrusion of Starch–Polyacrylamide Graft Copolymers Using Various Starches

Graft copolymers of polyacrylamide and various substrates were prepared by reactive extrusion in a twin screw extruder using ammonium persulfate as initiator. Substrates included unmodified starches (corn, waxy maize, wheat, and potato), cationic starches, dextrin, dextran, and polyvinyl alcohol (PVOH). The feed ratio of substrate to monomer was 2:1. Average conversion of monomer to polymer was 88.9% (±5.1%). Graft contents for the starch substrates were approximately 25% with grafting efficiencies of about 70%. Polyacrylamide graft molecular weights ranged from 317,000 to 769,000. Absorbencies at pH 7 for saponified graft copolymers prepared with unmodified starches were approximately 200 g/g and approximately 150 g/g for the cationic starches, dextran, and PVOH. In electrolyte solution (0.9% NaCl), absorbencies were in the range of 26–59 g/g, depending on substrate type. Saponified dextrin copolymers were essentially soluble with absorbencies of 6 g/g in water and 12 g/g in 0.9% NaCl.Names are necessary to report factually on available data; however, the USDA neither guarantees nor warrants the standard of the product, and the use of the name by USDA implies no approval of the product to the exclusion of others that may also be suitable.     

苯及其衍生物在Pluronic嵌段共聚物胶束水溶液中的增溶

用紫外光谱方法考察 35℃时苯、甲苯、二甲苯和氯苯在Pluronic嵌段共聚物F12 7和P12 3胶束中的增溶 .实验发现 ,当Pluronic嵌段共聚物胶束内核成分固定时 ,增溶量随内核体积 (对苯与氯苯系统 ,还包括栅栏层 )增大而线性增加 ,苯、甲苯、二甲苯和氯苯在每个胶束的最大增溶分子数分别为 4.4× 10 3、2 .3× 10 3、1.4× 10 3 和 7.1× 10 3 个 (F12 7)以及 11× 10 3、6 .8×10 3、4.2× 10 3 和 18× 10 3 个 (P12 3) ,这表明F12 7和P12 3是优良的芳香烃化合物增溶载体 .当苯环上增加甲基时 ,头一个甲基(甲苯 )对增溶量的影响比第二个甲基 (二甲苯 )的影响剧烈     

微波辐射法合成淀粉-丙烯酰胺接枝物及其絮凝性能研究

微波辐射法可合成淀粉 丙烯酰胺接枝物 ,产物可经红外光谱证明。其絮凝性能受接枝物浓度、接枝物接枝率、溶液酸度、溶液温度及絮凝时间等因素的影响。将其用作絮凝剂处理生活污水 ,效果优于国产聚丙烯酰胺 ,处理后的污水可达标排放。     

稠环芳烃在Pluronic嵌段共聚物胶束水溶液中的增溶

三种Pluronic嵌段共聚物（F108,P94和L64）胶束水溶液对萘、蒽、芘的增溶研究表明,它们在胶束和水相间的分配系数Kv值大小的顺序为：P94＞F108＞L64,这是由于具有较长PPO嵌段的Pluronic共聚物分子形成了较大内核的胶束,这种胶束有利于稠环芳烃的增溶。当指定Pluronic胶束体系时,Kv值随着稠环芳烃分子憎水性的增强（即分子苯环数目增加）而增大。这些规律同样反映在吸附等温线中。     

抗水树交联电缆运行安全性研究

为降低水树在中、高压电缆运行过程中的生长速度,将乙烯丙烯酸(EAA)共聚物、二亚苄基山梨糖醇(DBS)助剂加入交联聚乙烯(XLPE)基料中合成新型电缆绝缘料配方。在160℃进行混合、压片使之完成交联反应后,采用水树培养、电加速电老化试验研究添加剂含量对水树枝长度的影响。试验结果表明,在200倍偏光显微镜下可明显观察到改性后的电缆绝缘料中水树枝长度在一定范围内随着EAA及DBS含量的增加而减小,EAA及DBS在绝缘料中最佳的混合份数分别为1.5份和0.6份,抗水树交联电缆运行安全得到有效提高。