湍流环形通道热泳脱除可吸入颗粒物技术研究

湍流中PM 2.5粒子的热泳沉积是国际上研究热门课题.但目前单纯热泳沉积效率也不过20%左右.依据热泳基本原理,设计了一种新型湍流方环形双壁冷却式通道.计算表明,该类型通道比一般单管通道有着较高的可吸入颗粒物脱除效率.同时,利用湍流的沉积效率,加上热泳沉积效率,可以达到较高的总泳沉积效率.通过结构设计,可以提高可吸入颗粒物的脱除效率,是值得进一步探索的新路子.     

Quantifying The Rainfall-Water Level Fluctuation Process in a Geologically Complex Lake Catchment

Abstact Simulating hydrologic processes in geologically complex environments is a difficult scientific task since it incorporates high level of uncertainty. Many studies have attempted to accurately quantify the rainfall-water level elevation relationship in freshwater bodies so as to predict flooding and drought events. For this purpose several types of models have been implemented including distributed, black box and conceptual models that often provide efficient results, depending on the availability of reliable data as well as on the level of understanding of the system. Nevertheless, in the particular effort, three different models have been used to describe the relationship between rainfall and water level elevation in Trichonis Lake during the period 1951–1997. A Transfer Function model, a Dynamic Linear Regression and a physically based model, consisting of the lake's water budget equation, its Digital Bathymetric Model and GIS algorithms. These models have been tested to assess their efficiency and applicability in a karstic environment and the aim of the study was to find the best modeling option for developing sustainable water management plans and establishing a flooding/drought warning system in the particular lake catchment. The results indicated that in areas with geologically complex conditions, simple, physically-based models operate better than mechanistic models which usually cannot describe adequately the complexity of the system     

对几种大气环境预测方法的评估

本文根据石家庄市的常规气象资料和混合层高度,用不同的计算模式和计算方法对本市特征污染因子SO_4的长期平均浓度进行计算,把计算结果与实测浓度比较并进行误差分析,对每种计算方法进行评价,最后讨论了各种计算方法的特点及在城市大气环境预测中的实用性.     

Evaluation of the effect of meteorological data resolution on Lagrangian particle dispersion simulations using the ETEX experiment

This paper presents results from a series of numerical experiments designed to evaluate operational long-range dispersion model simulations, and to investigate the effect of different temporal and spatial resolution of meteorological data from numerical weather prediction models on these simulations. Results of Lagrangian particle dispersion simulations of the first tracer release of the European Tracer Experiment (ETEX) are presented and compared with measured tracer concentrations. The use of analyzed data of higher resolution from the European Center for Medium-Range Weather Forecasts (ECMWF) model produced significantly better agreement between the concentrations predicted with the dispersion model and the ETEX measurements than the use of lower resolution Navy Operational Global Atmospheric Prediction System (NOGAPS) forecast data. Numerical experiments were performed in which the ECMWF model data with lower vertical resolution (4 instead of 7 levels below 500 mb), lower temporal resolution (12 h instead of 6 h intervals), and lower horizontal resolution (2.5° instead of 0.5°) were used. Degrading the horizontal or temporal resolution of the ECMWF data resulted in decreased accuracy of the dispersion simulations. These results indicate that flow features resolved by the numerical weather prediction model data at approximately 45 km horizontal grid spacing and 6 h time intervals, but not resolved at 225 km spacing and 12 h intervals, made an important contribution to the long-range dispersion.     

Analyzing the Effects of Groundwater Pumping on an Urban Stream‐Aquifer System

When the cone of influence of a pumping well reaches a nearby river, the resulting hydraulic gradient can induce enhanced seepage of streamflow into the aquifer. The rate of seepage is often modeled using analytical solutions that are simple to apply but may not reproduce field data due to mathematical assumptions not being met in the field. Furthermore, the appropriateness of such models has not been investigated in detail due to difficulty in measuring streamflow loss in the field. In this study, a field experiment was conducted on a reach of the South Platte River near Denver, Colorado to estimate pumping‐induced streamflow loss. A network of stream gauges, monitoring wells, and in situ measurements was used to observe streamflow rates, groundwater levels, and temperature to assess if pumping wells have a significant impact on streamflow, and to compare observed streamflow depletion against analytical solutions. Data collected suggest that pumping wells have a noticeable impact on streamflow. The analytical solutions proved accurate if streamflow was low and constant but performed poorly if streamflow was high and variable. Therefore, for this reach, the use of analytical solutions to predict streamflow may only be appropriate under low‐flow, constant‐flow conditions. Methods and results can be used to guide other streamflow depletion studies and to inform cases of pumping‐induced streamflow depletion, particularly in regard to water rights.     

种群水平生态风险评价方法概述及其在环境管理中的应用

生态风险评价的目的是保护生态系统功能的完整性、稳定性和持久性,为环境风险管理提供理论依据。然而,目前常见的用于保护生物的化学污染物浓度阈值大多是以个体水平的毒性试验结果为基础,忽略了物种在时间和空间相互作用等因素,不能够完全保护生态环境安全和生态系统功能的延续性。本文从生态风险评价的概念、目的和意义引出种群水平生态风险评价在环境管理应用的重要性,综述了种群水平生态风险评价的科学问题(如密度依赖、遗传变异和空间结构等),归纳了种群水平风险评价主要模型方法及其应用(如Euler-Lotka方程、预测矩阵、个体模型、空间模型和动态能量预算模型等),列举了各国现有法律法规中关于种群水平生态风险评价的规定,以期为种群水平生态风险评价方法研究及在环境管理中的应用提供有益借鉴。     

江淮地区秋季一次典型污染过程分析

结合2018年10月15—20日国控站点监测数据、气象资料及激光雷达走航观测结果,对江淮地区一次重度污染过程进行了分析。利用拉格朗日粒子扩散模型和拉格朗日混合单粒子轨迹模型定性分析了区域污染来源,分别基于激光雷达和空气站实测数据提出了外来源占比的估算方法,结合嵌套网格空气质量预报模式(NAQPMS)的源解析结果,对比分析了外来源占比。以淮北市为例,结合NAQPMS和单颗粒气溶胶质谱的PM2.5在线源解析结果,对比分析此次污染过程的行业来源。结果表明,本地污染累积时段,主要以燃煤和机动车尾气混合源为主(占比>70%);受北方污染输送时段,机动尾气占比显著升高,从19.4%(16日00:00)升至66.7%(17日11:00),淮北市、蚌埠市、合肥市3个城市污染物外来输送占比分别为52.2%~70.6%、48.8%~58.8%、41.5%~59.0%。     

基于LBM的风窗流场数值模拟与PIV实验研究

风窗流场分布规律对于粉尘、瓦斯、有毒有害气体运移规律以及风窗局部阻力计算具有一定的影响,而常用的CFD方法在模拟风窗后阶湍流流场这类问题上存在计算复杂度高的问题,针对此问题,结合格子玻尔兹曼(LBM)方法在流场模拟方面具有求解精度高、计算复杂度小的特点,采用多松弛格式的格子玻尔兹曼方法(MRT-LBM)对巷道风窗流场进行模拟研究。为验证格子玻尔兹曼方法对风窗流场模拟的有效性,利用粒子图像测速仪(PIV)对风窗流场分布规律进行实验验证研究。研究结果表明:LBM模拟风窗流场回流区长度为340 mm,风窗主流风速最高达19.1 m/s;PIV实验测试风窗流场回流区长度为320 mm,风窗主流风速最高达18.4 m/s,在相同模型条件下,LBM模拟结果与PIV实验测试结果基本保持一致。LBM与Fluent模拟进行对比,模拟精度、运行速度和操作便捷性要优于Fluent模拟。     

A study of the atmospheric dispersion of a high release of krypton-85 above a complex coastal terrain, comparison with the predictions of Gaussian models (Briggs, Doury, ADMS4)

Atmospheric releases of krypton-85, from the nuclear fuel reprocessing plant at the AREVA NC facility at La Hague (France), were used to test Gaussian models of dispersion. In 2001-2002, the French Institute for Radiological Protection and Nuclear Safety (IRSN) studied the atmospheric dispersion of 15 releases, using krypton-85 as a tracer for plumes emitted from two 100-m-high stacks. Krypton-85 is a chemically inert radionuclide. Krypton-85 air concentration measurements were performed on the ground in the downwind direction, at distances between 0.36 and 3.3 km from the release, by neutral or slightly unstable atmospheric conditions. The standard deviation for the horizontal dispersion of the plume and the Atmospheric Transfer Coefficient (ATC) were determined from these measurements. The experimental results were compared with calculations using first generation (Doury, Briggs) and second generation (ADMS 4.0) Gaussian models. The ADMS 4.0 model was used in two configurations; one takes account of the effect of the built-up area, and the other the effect of the roughness of the surface on the plume dispersion. Only the Briggs model correctly reproduced the measured values for the width of the plume, whereas the ADMS 4.0 model overestimated it and the Doury model underestimated it. The agreement of the models with measured values of the ATC varied according to distance from the release point. For distances less than 2 km from the release point, the ADMS 4.0 model achieved the best agreement between model and measurement; beyond this distance, the best agreement was achieved by the Briggs and Doury models.     

事故预测数学模型的研究与实践

依据收集统计的、真实可靠的事故数据,运用数学方法及建立的多种事故预测模型,在工作中理论与实际相结合,提出并建立了事故预测数学模型,给出具体方法与步骤,以及应用中应遵循的原则和规律,从而做到对将来发生的事故未卜先知,用以指导安全生产活动,预防事故发生。同时,根据我国近18年来各类事故死亡人员的数据建立事故预测数学模型,并运用确立的最佳事故预测数学模型而预测出的事故数据,探讨我国伤亡事故发生的趋势。