污泥厌氧发酵产酸关键影响因素的函数模型研究

本研究以城市剩余污泥预处理液作为底物,调节底物不同C/N比,测定了厌氧发酵过程中几种关键酶的酶活及发酵产物乙酸、丙酸及丁酸的浓度.同时,利用Matlab软件通过回归分析和函数拟合构建了C/N比-关键酶活-酸产量之间的多项式函数模型,发现所建立的二元三次多项式模型的拟合优度R2均大于0.9,且残差平方和较小,因此,判定二元三次多项式更适合描述C/N比-关键酶活-酸产量的数学关系.最后,建立了关键酶活、C/N比和产酸量三因素间的曲面模型,发现该模型能够很好地描述污泥厌氧发酵中C/N比条件对关键酶和产酸类型的影响,并能进一步预测C/N比所对应的酶活和产酸发酵类型,可为今后的实验研究及工程放大提供理论参考.     

The velocity of DNAPL fingering in water-saturated porous media: laboratory experiments and a mobile–immobile–zone model

Dense nonaqueous phase liquids (DNAPLs) are immiscible with water and can give rise to highly fingered fluid distributions when infiltrating through water-saturated porous media. In this paper, a conceptual mobile–immobile–zone (MIZ) model is presented to describe the structure of a DNAPL finger in water-saturated porous media and the velocity of finger propagation. A finger is composed of a finger body and a tip. The finger body has a mobile core and an immobile sheath. All the DNAPL within the tip of a finger is mobile. Lab experiments utilizing image analyses of a DNAPL (PCE) penetrating into water-saturated homogeneous glass beads were carried out in a two-dimensional transparent chamber. The results show that the fingers elongated almost linearly with time. The fingers did not grow laterally after the tip of the finger had passed. The average finger diameters were between 3.9 and 5.4 mm for PCE propagation in water-saturated glass bead porous media with mean particle diameters from 0.32 to 1.36 mm. The estimated mobile core diameters were 51–60% of the average finger diameters.     

Dairy Manure Treatment,Digestion and Nutrient Recovery as a Phosphate Fertilizer

A combined approach of biological treatment, solids digestion and nutrient recovery was tested on dairy manure. A sequencing batch reactor (SBR) was operated in three modes, in order to optimize nutrient (nitrogen and phosphorus) removals. The highest average removal efficiencies of 91% for NH₄-N, 59% for PO₄-P and 80% for total chemical oxygen demand (COD) were achieved. Staining experiments suggested the coexistence of glycogen and phosphorus accumulating organisms. Anaerobic digestion of wasted bio-solids was able to produce a PO₄-P concentration of 70 mgL^?1 in the supernatant. A pilot-scale experiment, designed to recover phosphorus in the supernatant as struvite (magnesium ammonium phosphate), was able to remove 82% of soluble PO₄-P.     

Population dynamics during startup of thermophilic anaerobic digesters: The mixing factor

Two thermophilic digesters were inoculated with manure and started-up under mixed and stagnant conditions. The Archaea in the mixed digester (A) were dominated by hydrogenotrophic Methanobateriaceae (61%) with most of the methane being produced via syntrophic pathways. Methanosarcinales (35%) were the only acetoclastic methanogens present. Acetate dissipation seems to depend on balanced hydrogenotrophic-to-acetotrophic abundance, which in turn was statistically correlated to free ammonia levels. Relative abundance of bacterial community was associated with the loading rate. However, in the absence of mixing (digester B), the relationship between microbial composition and operating parameters was not discernible. This was attributed to the development of microenvironments where environmental conditions are significantly different from average measured parameters. The impact of microenvironments was accentuated by the use of a non-acclimated seed that lacks adequate propionate degraders. Failure to disperse the accumulated propionate, and other organics, created high concentration niches where competitive and inhibiting conditions developed and favored undesired genera, such as Halobacteria (65% in B). As a result, digester B experienced higher acid levels and lower allowable loading rate. Mixing was found necessary to dissipate potential inhibitors, and improve stability and loading capacity, particularly when a non-acclimated seed, often lacking balanced thermophilic microflora, is used.     

Determination of biogas generation potential as a renewable energy source from supermarket wastes

Fruit, vegetable, flower waste (FVFW), dairy products waste (DPW), meat waste (MW) and sugar waste (SW) obtained from a supermarket chain were anaerobically digested, in order to recover methane as a source of renewable energy. Batch mesophilic anaerobic reactors were run at total solids (TS) ratios of 5%, 8% and 10%. The highest methane yield of 0.44 L CH₄/g VS_added was obtained from anaerobic digestion of wastes (FVFW + DPW + MW + SW) at 10% TS, with 66.4% of methane (CH₄) composition in biogas. Anaerobic digestion of mixed wastes at 5% and 8% TS provided slightly lower methane yields of 0.41 and 0.40 L CH₄/g VS_added, respectively. When the wastes were digested alone without co-substrate addition, the highest methane yield of 0.40 L CH₄/g VS_added was obtained from FVFW at 5% TS. Generally, although the volatile solids (VS) conversion percentages seemed low during the experiments, higher methane yields could be obtained from anaerobic digestion of supermarket wastes. A suitable carbon/nitrogen (C/N) ratio, proper adjustment of the buffering capacity and the addition of essential trace nutrients (such as Ni) could improve VS conversion and biogas production yields significantly.     

Influence of aeration modes on leachate characteristic of landfills that adopt the aerobic–anaerobic landfill method

As far as the optimal design, operation, and field application of the Aerobic–Anaerobic Landfill Method (AALM) are concerned, it is very important to understand how aeration modes (different combinations of aeration depth and air injection rate) affect the biodegradation of organic carbon and the transformation of nitrogen in landfill solid waste. Pilot-scale lysimeter experiments were carried out under different aeration modes to obtain detailed information regarding the influence of aeration modes on leachate characteristics. Results from these lysimeter experiments revealed that aeration at the bottom layer was the most effective for decomposition of organic carbon when compared with aeration at the surface or middle layers. Moreover, the air injection rate led to different nitrogen transformation patterns, unlike the lesser influence it has on organic carbon decomposition. Effective simultaneous nitrification and denitrification were observed for the aeration mode with a higher air injection rate (=1.0 L/min). On the other hand, the phenomenon of sequenced nitrification and denitrification could be observed when a low air injection rate (=0.5 L/min.) was employed. Finally, it is concluded that, for AALM, air injection with a higher air injection rate at the deepest layer near the leachate collection pipe tends to accelerate the stabilization of landfill waste as defined in terms of the enhancement of denitrification as well as organic carbon decomposition.     

Assessment of Several Test Methods for the Determination of the Anaerobic Biodegradability of Polymers

Anaerobic degradation of eight commercially available biodegradable polymers was compared in two anaerobic tests using digestion sludge, according to ISO 11734 and ASTM D.5210-91. Cotton, polyhydroxybutyrate/hydroxyvalerate copolymer (PHB/PHV), starch blend, thermoplastic cellulose acetate, and cellulose acetate fibers proved to be anaerobically degradable, but only a low extent of degradation was found for polylactide, polyvinylalcohol, and polycaprolactone. Both test methods gave the same overall results, but with the ISO medium, longer lag phases and greater ranges of variation in the results were observed. These effects are presumably due to low concentrations of carbon dioxide in the ISO medium. Carbon dioxide has been demonstrated to be essential for the growth of various anaerobic bacteria, notably homoacetogenic and methanogenic bacteria.     

Bio-Hydrogen Synthesis from Wastewater by Anaerobic Fermentation Using Microflora

Biological hydrogen production was investigated using biomass in palm oil mill effluent (POME) and artificial wastewater containing 10g glucose under anaerobic fermentation in a batch process. Activated POME sludge and different types of composts were collected as sources of inocula for the study. The anaerobic microflora was found to yield significant amounts of hydrogen. The experimental results show that the gas composition contained hydrogen (66–68%) and carbon dioxide (32–34%). Through out the study, methane gas was not observed in the evolved gas. The hydrogen production was accompanied with the formation of acetate and butyrate. Furthermore, the cumulative hydrogen data were fitted to a simple model developed from Gompertz Equation, where the lag phase time, hydrogen production potential and hydrogen production rate at various conditions were quantitatively estimated.     

Characterizing food waste substrates for co-digestion through biochemical methane potential (BMP) experiments

Co-digestion of food waste with dairy manure is increasingly utilized to increase energy production and make anaerobic digestion more affordable; however, there is a lack of information on appropriate co-digestion substrates. In this study, biochemical methane potential (BMP) tests were conducted to determine the suitability of four food waste substrates (meatball, chicken, cranberry and ice cream processing wastes) for co-digestion with flushed dairy manure at a ratio of 3.2% food waste and 96.8% manure (by volume), which equated to 14.7% (ice-cream) to 80.7% (chicken) of the VS being attributed to the food waste. All treatments led to increases in methane production, ranging from a 67.0% increase (ice cream waste) to a 2940% increase (chicken processing waste) compared to digesting manure alone, demonstrating the large potential methane production of food waste additions compared to relatively low methane production potential of the flushed dairy manure, even if the overall quantity of food waste added was minimal.     

Zeolites relieves inhibitory stress from high concentrations of long chain fatty acids

Protein and fat rich slaughterhouse waste is a very attractive waste stream for the production of biogas because of the high biochemical methane potential of the substrate. The material has however some drawbacks as the sole material for biogas production due to the production of several process disturbing metabolites such as ammonia, sulfides and long chain fatty acids. We can in this work present results that show that zeolites have the potential to relieve inhibitory stress from the presence of long chain fatty acids. Moreover, the results strongly indicate that it is mainly acetic acid consumers that are most negatively affected by long chain fatty acids and that the mechanism of stress relief is an adsorption of long chain fatty acids to the zeolites. In addition to this, it is shown that the effect is immediate and that only a small amount of zeolites is necessary to cancel the inhibitory effect of long chain fatty acids.