Biological sulfate removal from acrylic fiber manufacturing wastewater using a two-stage UASB reactor

A two-stage UASB reactor was employed to remove sulfate from acrylic fiber manufacturing wastewater. Mesophilic operation (35±0.5℃) was performed with hydraulic retention time (HRT) varied between 28 and 40 hr. Mixed liquor suspended solids (MLSS) in the reactor was maintained about 8000 mg/L. The results indicated that sulfate removal was enhanced with increasing the ratio of COD/SO₄^2-. At low COD/SO₄^2-, the growth of the sulfate-reducing bacteria (SRB) was carbon-limited. The optimal sulfate removal efficiencies were 75% when the HRT was no less than 38 hr. Sulfidogenesis mainly happened in the sulfate-reducing stage, while methanogenesis in the methane-producing stage. Microbes in sulfate-reducing stage performed granulation better than that in methane-producing stage. Higher extracellular polymeric substances (EPS) content in sulfate-reducing stage helped to adhere and connect the flocculent sludge particles together. SRB accounted for about 31% both in sulfate-reducing stage and methane-producing stage at COD/SO₄^2- ratio of 0.5, while it dropped dramatically from 34% in sulfate-reducing stage to 10% in methane-producing stage corresponding to the COD/SO₄^2- ratio of 4.7. SRB and MPA were predominant in sulfate-reducing stage and methane-producing stage respectively.     

Kinetics of carbon dioxide absorption into mixed aqueous solutions of MDEA and MEA using a laminar jet apparatus and a numerically solved 2D absorption rate/kinetics model

New comprehensive numerically solved 1D and 2D absorption rate/kinetics models have been developed, for the first time, to interpret the experimental kinetic data obtained with a laminar jet apparatus for the absorption of carbon dioxide (CO₂) in CO₂ loaded mixed solutions of mixed amine system of methyldiethanolamine (MDEA) and monoethanolamine (MEA). Three MDEA/MEA weight ratios ranging from 27/03 to 23/07, over a concentration range of 2.316–1.996 kmol/m³ for MDEA and of 0.490–1.147 kmol/m³ for MEA were studied. The models take into account the coupling between chemical equilibrium, mass transfer, and the chemical kinetics of all possible chemical reactions involved in the CO₂ reaction with MDEA/MEA solvent. The partial differential equations of the 1D model were solved by two numerical techniques; the finite difference method (FDM) based on in-house coded Barakat–Clark scheme and the finite element method (FEM) based on COMSOL software. The FEM comprehensive model was then used to solve the set of partial differential equations in the 2D cylindrical coordinate system setting. Both FDM and FEM produced very accurate results for both the 1D and 2D models, which were much better than our previously published simplified model. The reaction rate constant obtained for MEA blended into MDEA at 298–333 K was k_MEA = 5.127 × 10⁸ exp(−3373.8/T). In addition, the 2D model, for the first time, has provided the concentration profiles of all the species in both the radial and axial directions of the laminar jet, thereby enabling an understanding of the correct sequence in which the reaction steps involved in the reactive absorption of CO₂ in aqueous mixed amines occur.     

提高高校档案利用的新途径

针对目前高校档案利用率不高的实际情况,为有效地提高档案利用率,充分发挥高校档案在高校发展建设、科学管理、提升教育教学水平中的作用,笔者通过多年的探索实践,提出了加大宣传力度、搞好基础建设、提高人员素质、拓展服务方式、创新服务内容等高校档案利用的新途径,与从事高校档案工作的广大同仁商榷。     

Seven thousand years in the service of humanity—the history of copper, the red metal

Measured by weight, copper is the third most important metal used by man. The annual value of its 2007 output was on a par with the GDP of e.g. Ukraine. Copper is also one of the oldest metals, its employment going back 7000 years. For millennia, it was predominantly employed for decorative purposes, coinage and in warfare. Technical breakthroughs in antiquity, like smelting and alloying, expanded its production and enhanced its utility. Copper's true heyday occurred after 1850, with the usage of electricity. In the period since then, volumes increased 300-fold, while costs and prices declined. With impressive progress in the technology of its production and consumption, the red metal has been able to hold its own, despite the emergence over history of formidable substitutes like iron, aluminum, plastics and optic fiber.     

Determination of direct and fugitive PM emissions in a Mediterranean harbour by means of classic and novel tracer methods

Remodelling works are frequent in harbour areas, given that they must adapt to rapidly changing market requirements. Depending on their nature (construction, demolition, etc.), these works may be carried out during long periods of time and thus exert a significant impact on the air quality at the harbours and their surroundings. The air quality at the Valencia harbour was studied during an enlargement project. Four sampling stations aimed to cover the major dust-emitting activities in the harbour. In addition, a sampling campaign was carried out to collect dust materials at their emission sources (e.g., loading and unloading of clinker and petroleum coke, as well as the enlargement works). Differences obtained between PM levels at the monitoring sites were correlated with the distance between sampling stations and enlargement works and/or harbour operations, as well as with the preferential wind direction. In all cases, the days with the highest PM_10 levels were linked to wind directions coinciding with the location of the enlargement works or the clinker and petroleum coke stocks. Classic source apportionment methodologies (PCA and CMB) were applied to the data, but their interpretation was complex due to the similar chemical signatures of PM originating from direct and fugitive emissions from stocked materials (e.g., clinker), and the enlargement works. To overcome this difficulty, a novel non-statistical approach was used to obtain quantitative estimations of the contributions from sources (petroleum coke and clinker), based on the correlation between specific PM components (e.g., carbonaceous species) and source tracers (e.g., V). Finally, a qualitative test using phenolphthalein was devised to identify the presence of clinker on the filters, which provided positive results. This novel tracer approach is thus recommended for harbour authorities.     

TEACHING WATER RESOURCES POLICY TO UNWERSITY SCIENCE AND ENGINEERING STUDENTS: OPPORTUNITIES AND CHALLENGES1

ABSTRACT: Effectively teaching water resources policy to university science and engineering students is both important and difficult. Most careers in the water resources field require an understanding of the comprehensive governmental regulatory structure affecting water use. Also, few science and engineering curricula encourage their students to take policy courses. Successful approaches to teaching water resources policy might include epistemological comparisons, case studies, issue maps, and interactive simulations. Obstacles to the effective teaching of this subject include students' insufficient preparation and student disdain and cynicism. These obstacles may be mitigated by requiring a prerequisite, developing a glossary of policy-related terms, and introducing the course through lectures emphasizing realistic views of the water resources management field and the nature of the American political system.     

EXPERIMENTAL EVALUATION OF MULTIPLE CRITERIA DECISION MODELS FOR APPLICATION TO WATER RESOURCES PLANNING1

ABSTRACT: A research project was undertaken for the U.S. Army Corps of Engineers to determine the relative utility and effectiveness of four well-known multicriteria decision making (MCDM) models for applications in realistic water resources planning settings. A series of experiments was devised to examine the impact of rating and ranking procedures on the decision making behavior of users (e.g., planners, managers, analysts, etc.) when faced with situations involving multiple evaluation criteria and numerous alternative planning projects. The four MCDM models tested were MATS-PC, EXPERT CHOICE, ARIADNE, and ELECTRE. Two groups of analysts and decision makers were tested. One group consisted of experienced U.S. Army Corps planners, while the other was comprised of graduate students. Based on a series of nonparametric statistical tests, the results identified EXPERT CHOICE as the preferred MCDM model by both groups based largely on ease of use and understandability. ARIADNE fostered the largest degree of agreement within and among the two groups of individuals tested. The tests also lend support to the claim that rankings are not affected significantly by the choice of decision maker (i.e., who uses any of these MCDM models) or which of these four models is used.     

UNCERTAINTY OF EXTREME FLOOD ESTIMATES INCORPRATING HISTORICAL DATA1

ABSTRACT: The ability to predict extreme floods is an important part of the planning process for any water project for which failure will be very costly. The length of a gage record available for use in estimating extreme flows is generally much shorter than the recurrence interval of the desired flows, resulting in estimates having a high degree of uncertainty. Maximum likelihood estimators of the parameters of the three parameter lognormal (3PLN) distribution, which make use of historical data, are presented. A Monte Carlo study of extreme flows estimated from samples drawn from three hypothetical 3PLN populations showed that inclusion of historical flows with the gage record reduced the bias and variance of extreme flow estimates. Asymptotic theory approximations of parameter variances and covariances calculated using the second and mixed partial derivatives of the log likelihood function agreed well with Monte Carlo results. First order approximations of the standard deviations of the extreme flow estimates did not agree with the Monte Carlo results. An alternative method for calculating those standard deviations, the “asymptotic simulation” method, is described. The standard deviations calculated by asymptotic simulation agree well with the Monte Carlo results.     

蒙山茶业发展中的生态环境问题与对策刍议

分析了蒙山茶业生态环境特征，指出目前传统茶区存在的弊病，提出在蒙山建立生态茶区的重要性及其具体措施。     

工业企业噪声环境影响评价中的布点与预测时段的选择

在工业企业噪声环境影响评价中，由于测点与测量时段选择的不妥，导致测量及预测值“以偏代全”的结果；本文提出了测点合理布设与测量，预测时段科学选择的原则，以使测量与预测结果能较好地符合项目建成前、后噪声环境实际状况。