Non-UV based germicidal activity of metal-doped TiO2 coating on solid surfaces

A stain-based screening method was developed to screen different catalyst coatings for their germicidal activity. A Baclight dead/live bacteria viability kit （invitrogen, molecular probes） was used for staining the cell. The screening was carried out following a standard procedure. This included loading cell suspension to solid surface and maintaining contact for 30 min, then staining with a mixture containing dyes. The stained cells were observed using an epifluorescent microscope and photographed with a CCD camera under UV. Metal-doped TiO2 coatings on AI plates were prepared and tested for non-UV germicidal activity without using UV. It was tested using model microorganisms such as Bakers Yeast （Saccharomyces cerevisiae）, Bacillus subtilis, Pseudomonas putida, and Escherichia coli. On the basis of the germicidal activity of catalyst and the degree of damage caused to the cells, the stained cells may appear green （viable）, green with red or yellow nuclei and yellow （compromised） or red （nonviable）. According to their stained color, cells were counted to calculate the percentage of dead, live, and compromised cells. Compromised cells are cells that grow very slowly after reculturing indicating a degree of reversible cell damage. Screening the germicidal activity using this staining method is accurate and efficient, and requires less time than the culture-based method. A modification to the procedure for measuring germicidal activity of rough surfaces or fibrous coatings was developed. Both TiO2 and metal-doped TiO2 （Ag, Pt, Au, Cu） possess non-UV based germicidal activity. The germicidal activity of TiO2 was found to be related with its wetting property and can be improved by UV irradiation before testing. It is not greatly affected by contact time, indicating a fast acting germicidal activity.     

Spatial distribution of aerosol pollution based on MODIS data over Beijing, China

With the help of regression analysis,the relationships were detected between aerosol's contribution to apparent reflectance(ACR) derived from Moderate Resolution Imaging Spectroradiometer(MODIS)on board Terra and hourly PM_(10)mass concentration measured at 30 ground-based locations in Beijing for the August of 2003 and 2004.It was shown that there was a good correlation between the ACR and PM_(10)(linear correlation coefficient,R=0.56).On the basis of this relationship,spatial distribution and possible sources of PM_(10)derived from MODIS were analyzed and two frequently heavily-polluted regions were found,namely downtown of the city and the district near Xishan Mountain.These two regions coincidently are also urban heat island centers.The foundings of this paper will be greatly useful for environmental monitoring and urban planning for Beijing,especially for the 2008 Olympic game to be held in Beijing.     

Thermodynamics and kinetics of cadmium adsorption onto oxidized granular activated carbon

Cadmium sorption behavior of granular activated carbon oxidized with nitric acid was systematically studied by sets of the equilibrium and time-based experiments under various conditions.The cadmium adsorption capacity of oxidized granular activated carbon enlarged with an increase in pH,and reduced with an increase in ionic strength.Experimental data were evaluated to find out kinetic characteristics.Adsorption processes were found to follow pseudo-second order rate equation.Adsorption isotherms correlate well with the Langmuir isotherm model and the maximum sorption capacity of cadmium evaluated is 51.02μmol/g.Thermodynamic parameters were calculated based on Van't Hoff equation.Equilibrium constant Kd was evaluated from Freundlich isotherm model constants,Langmnir isotherm model constants,and isotherms,respectively.The average change of standard adsorption heatΔH~0 was -25.29 kJ/mol.NegativeΔH~0 andΔG~0 values indicate the adsorption process for cadmium onto the studied activated carbon is exothermic and spontaneous.The standard entropyΔS~0 was also negative,which suggests a decrease in the freedom of the system.     

Dynamics of local governance in natural resource conservation in the Okavango Delta,Botswana

There has been a shift in natural resource management worldwide. This paper describes how modern institutions and policies influence management and shape access to and utilization of resources by rural communities in the Okavango Delta, Botswana. It is rooted in the framework of adaptive co‐governance within social‐ecological systems, and employs a critical literature review to analyse access to and use of natural resources in rural Botswana. Prior to the establishment of community‐based natural resource management (CBNRM) in Botswana in 1989, resource governance was dominated by strong traditional institutions that were responsible for natural resource management and decision‐making. Contemporary natural resource governance is characterized by a bureaucratic system that invariably undermines the role of traditional institutions in natural resource governance. Findings indicate that policies and regulatory instruments deny rural communities adequate access to and utilization of resources available within their immediate environment. In spite of an orientation towards an anthropocentric approach to natural resource management (as in the case of CBNRM), the current governance system continues to undermine the inclusion of local resource users as legitimate stakeholders in the decision‐making process.     

Application of 1D and 2D MFR reactor technology for the isolation of insecticidal and anti-microbial properties from pyrolysis bio-oils

Valuable chemicals can be separated from agricultural residues by chemical or thermochemical processes. The application of pyrolysis has already been demonstrated as an efficient means to produce a liquid with a high concentration of desired product. The objective of this study was to apply an insect and microorganism bioassay-guided approach to separate and isolate pesticidal compounds from bio-oil produced through biomass pyrolysis. Tobacco leaf (Nicotianata bacum), tomato plant (Solanum lycopersicum), and spent coffee (Coffea arabica) grounds were pyrolyzed at 10°C/min from ambient to 565°C using the mechanically fluidized reactor (MFR). With one-dimensional (1D) MFR pyrolysis, the composition of the product vapors varied as the reactor temperature was raised allowing for the selection of the temperature range that corresponds to vapors with a high concentration of pesticidal properties. Further product separation was performed in a fractional condensation train, or 2D MFR pyrolysis, thus allowing for the separation of vapor components according to their condensation temperature. The 300–400°C tobacco and tomato bio-oil cuts from the 1D MFR showed the highest insecticidal and anti-microbial activity compared to the other bio-oil cuts. The 300–350 and 350–400°C bio-oil cuts produced by 2D MFR had the highest insecticidal activity when the bio-oil was collected from the 210°C condenser. The tobacco and tomato bio-oil had similar insecticidal activity (LC₅₀ of 2.1 and 2.2 mg/mL) when the bio-oil was collected in the 210°C condenser from the 300–350°C reactor temperature gases. The 2D MFR does concentrate the pesticidal products compared to the 1D MFR and thus can reduce the need for further separation steps such as solvent extraction.     

全二维气相色谱-飞行时间质谱法分离复杂体系中7种指示剂 多氯联苯

采用全二维气相色谱-飞行时间质谱法(GC×GC TOF-MS)分析了混标样品Aroclor 1260、Aroclor 1254、Aroclor 1242中的多氯联苯(PCBs)单体,考察了在复杂体系下对7种PCBs指示剂的分离能力。结果表明,与优化柱系统的分离效果相比,136种单体的混标样品中共分离出121种单体,7种指示剂经一维和二维的保留时间及质谱定性,在121种单体的2D斑点图中清晰可辨。全二维对于复杂体系的PCBs和指示剂的分离表明其强大的分离能力和对于检测复杂体系中指示剂的分辨能力,对该类物质的定性和定量检测具有重要意义。     

钼酸铵生产废液的综合治理

钼酸铵生产过程中产生的酸性废液,经中和,过滤,滤渣热碱浸取、滤液蒸发浓缩等步骤,可回收废液中的７９％的钼,并获得ＮＨ４ＮＯ３、ＮＨ４Ｃｌ混合液体肥料。     

回火焊道焊接技术在焦炭塔修复中的应用

为了避免耗时长、费用高的焊后热处理或整体更换筒节,针对铬钼钢焦炭塔内壁环焊缝的裂纹和锥段内壁腐蚀缺陷,提出采用回火焊道焊接技术对内壁缺陷部位进行修复。结果表明,严格按照经评定合格的焊接工艺进行施焊,回火焊道焊接技术可以利用层道间的焊接热循环作用达到焊后热处理的效果,使焊接修复后铬钼钢焦炭塔的母材和复合层的冶金和力学性能满足要求。     

丝藻对含钼废水中MoO_4~(2-)的吸附特性及机制研究

研究了丝藻对含钼废水中MoO2-4的吸附作用。分别考察了初始pH、吸附时间、温度、投加量以及竞争离子等5个因素对吸附过程的影响,并应用吸附热力学和动力学方法对吸附机制进行了探讨。结果表明,丝藻在初始pH 1、吸附时间40min、投加量为1.0g以及30℃条件下,对含钼废水中MoO2-4的去除率达82%,平衡吸附量为0.657 0mg/g。PO3-4对MoO2-4的吸附具有较强的拮抗作用,平衡吸附量下降至0.380 0mg/g,SiO4-4对MoO2-4的拮抗作用相对较弱,而SO2-4对MoO2-4的吸附却有一定的协同作用。丝藻对MoO2-4的吸附等温数据更符合Langmuir吸附等温模型,准二级动力学方程拟合的吸附动力学过程相关性较高,20、25℃下的R2都在0.99以上。说明丝藻吸附MoO2-4属于化学吸附,受化学反应速率控制,且丝藻可以应用于含钼废水治理领域。     

改性SCAC催化臭氧氧化去除布洛芬效能与反应活性位点研究

采用不同的表面改性方法(去矿化处理、氧化改性、碱改性和还原改性)对污泥基活性炭(SCAC)进行处理,分别获得了表面金属含量低、碱位低、碱性官能团含量高及Lewis碱含量高的4种改性SCAC(SCAC-D、SCAC-S、SCAC-OH和SCAC-N),对比考察了改性前后SCAC催化臭氧氧化去除布洛芬(IBP)的效能,并探讨了SCAC催化臭氧氧化反应的主要活性位点。结果表明,5种SCAC催化活性顺序为:SCAC-N>SCAC-OH>SCAC>SCAC-S>SCAC-D;金属组分减少会直接影响SCAC的催化活性,碱位减少对其催化活性的影响相对较弱,说明SCAC表面较为丰富的金属组分是其催化臭氧氧化反应的主要活性位点;增加SCAC表面碱位(Lewis碱和碱性官能团),减少表面酸性官能团有助于提高其催化活性。