Vanadium and molybdenum concentrations in particulate from Palermo (Italy): analytical methods using voltammetry

The main purpose of this work was to develop a reliable method for the determination of vanadium (V) and molybdenum (Mo) in atmosphere particles or aerosols because they can not be readily measured using conventional techniques. For this research, 30 particulate samples were collected from five different stations located at Palermo, Italy. We used the catalytic adsorptive stripping voltammetry and differential pulsed voltammetry to measure V and Mo in atmospheric particulate, respectively. The represented method includes advantages of high sensitivity, high selectivity, simplicity, reproducibility, speed and low costs. The quantification limits for V and Mo are, respectively, 0.57 and 0.80 ng·m⁻³. The precision, expressed as relative standard deviation (RSD %), was about 2% for both metals. The mean recoveries of added V and Mo were about 99.5% and ranged from 97% to 101%. Vanadium concentrations in particulate samples collected in Palermo area ranged from 0.57 to 7.7 ng·m⁻³, while Mo concentrations were in the range 0.8–51 ng·m⁻³. In many cases the concentrations of two elements in the particulate samples fall below the detection limits. The mean concentrations for V and Mo in particulate samples, collected in Palermo area, were respectively 3.1 and 5.9 ng·m⁻³.     

Effect of waterborne boron and molybdenum on survival,growth and feed intake of Indian major carp,Cirrhinus mrigala (Hamilton)

The effect of either boron (B) or molybdenum (Mo) on survival, growth and feed intake of Indian major carp, Cirrhinus mrigala (Hamilton), advanced fry was studied in two separate experiments. Survival rates of C. mrigala fry (2.78±0.14 g) following 50 days’ exposure to B at 0.01 (control), 0.5, 1.0, 2.0, 4.0 and 8.0 mg·L ^?1 were 100% at all concentrations except 8.0 mg·L ^?1 where the survival rate 87.5±7.5%. We observed 100% survival of mrigala fry at all concentrations of Mo, 0.02 (control), 0.5, 1.0, 2.0, 4.0 and 8.0 mg·L ^?1. Both B and Mo at 0.5 mg·L ^?1 showed significantly (p<0.05) higher growth of the fish compared with control and other concentrations. B exposure at 1.0, 2.0 and 4.0 mg·L ^?1 had no significant effect on growth rate, whereas at 8.0 mg B·L ^?1 growth of the fish almost ceased. Mo exposure at 1.0, 2.0, 4.0 and 8.0 mg·L ^?1 caused no significant effect on growth rate of the fish compared to control. Both B and Mo at all concentrations had no significant effect on feed intake of the fish compared with control, except at the highest concentration of boron (8.0 mg·L ^?1).     

Risk assessment: an approach to control hazards in mines

Accidents and injuries related to work are major occupational health problems in most of the industrialized countries.Traditional approaches to manage workplace safety in mines have mainly focused on job redesign and technical aspects of engineering systems.It is being realized that compliance to rules and regulations of mines is a prerequisite;however,it is not sufficient to achieve further reduction in accident and injury rates in mines.Proactive approaches are necessary to further improve the safety standards in mines.Unsafe conditions and practices in mines lead to a number of accidents,which in turn may cause loss and injury to human lives,damages to property,and loss of production.Hazard identification and risk assessment is an important task for the mining industry which needs to consider all the risk factors at workplaces.Applications of risk management approaches in mines are necessary to identify and quantify potential hazards and to suggest effective solutions.In this paper,the following risk estimation techniques were discussed:(i)DGMS(Directorate General of Mines Safety,India)risk rating criterion,and(ii)a matrix based approach.The proposed tools were demonstrated through an application in an opencast coal mine in India.It was inferred that the risk assessment approach can be used as an effective tool to indentify and control hazards in mines.     

填海工程对海水入侵影响的数值模拟研究

在系统分析研究区地质及水文地质条件的基础上,运用地下水模型FEFLOW建立了研究区垂向二维非均质流体的对流-弥散数学模型,并通过水位和水质的动态观测资料对模型进行了识别和校正.运用识别后的模型模拟了有填海和无填海两种工况下的海水入侵过程.结果表明:地下水开采是海水入侵的主要原因;在开采地下水条件下,研究区有无填海工程对海水入侵的影响不大,研究区填海工程对海水入侵有一定的阻挡作用,但作用不是很显著.     

钙基脱硫剂固硫率的测定方法

介绍了钙基脱硫剂固硫后形成的ＣａＯＣａＳＯ４固体混合物中钙和硫酸根的测定方法,改进了文献中微量硫酸根的一分析,分析了滴定过程听机理。先用高氯酸将固体混合物溶解形成水溶液,然后以杜试剂为批示剂,用高氯酸钡溶液滴定溶液中的微量硫酸根,并用ＥＤＴＡ法以钙红为指示剂滴定溶液中的钙离子,从而可以计算出钙基脱硫剂的固硫率（表示为脱硫后固体混合物中的钙硫化）。     

我国草浆造纸行业清洁生产机会

分析我国草浆造纸行业从备料,制浆到造纸全过程,针对主要的工艺环节提出其潜在的清洁生产机会,相应的污染预防与削减措施,技术要求及其环境与经济效益,并附有实例供参考。     

Detection, isolation, and identification of cadmium-resistant bacteria based on PCR-DGGE

This study focused on the screening of cadmium-resistant bacterial strains from Pb-Zn tailing. We investigated the diversity of microbial community inhabiting Dong-san-cha Pb-Zn tailing in Beijing, China, by polymerase chain reaction-denaturing gradient gel electrophoresis （DGGE） of 16S rRNA gene of bacterial strain, and found two dominant strains in the DGGE profile. Using special culture media, we isolated two strong cadmium-resistant bacterial strains. On the basis of morphological, physiological, and biochemical characteristics, BIOLOG, and 16S rDNA sequencing, the two strains were identified as Bacillus cereus and Enterobacter cloacae. Minimal inhibitory concentrations （MICs） of heavy metals for the bacteria were determined. E. cloacae showed higher MIC values for heavy metals and a larger range of antibiotic resistance than B. cereus.     

田间条件下生物炭与化肥配施对土壤氮磷纵向迁移、结球生菜产量品质及土壤微生物数量的影响

为探讨生物炭对农田化肥面源污染的防控效果,本文以北运河流域(北京段)下游"上壤下砂"、施肥量大、易漏水漏肥菜田为研究对象,分析了田间条件下不同用量生物炭配合化肥底施和施炭基肥对土壤氮磷纵向迁移、结球生菜产量品质及土壤微生物数量的影响.结果表明:与单施化肥(T1)相比,①化肥配施生物炭750 kg·hm-2(T2)、22...     

Improving traffic safety: Conceptual considerations for successful action

Introduction

In the early stages of motorization, it did not take rigorous scientific research to achieve major improvements in traffic safety. Instead, early traffic-safety countermeasures were often based exclusively on common sense. Since then, scientific research has gradually increased in importance as the basis for developing successful interventions. This shift was not made by choice but mostly by necessity: Many of the “easy” problems have already been addressed, and the remaining problems are generally too complex for an approach based solely on common sense. Fortunately, our understanding of the complexities involved in traffic safety has recently made major gains, and common sense can now be supplemented, to some degree, by valid technical analysis.

Approach

This article discusses major conceptual issues that should be considered in guiding the future development of effective, science-based traffic-safety countermeasures.

Impact on industry

After briefly discussing the conceptual issues, the article offers a list of implications for action.     

Consolidation in an Individual Transferable Quota Regime: Lessons from New Zealand, 1986–1999

Market-based approaches to environmental regulation (such as tradable permits or transferable quotas) are frequently offered as innovative solutions to many environmental problems. Globally, one of the most well-established forms of this approach is individual transferable quotas (or ITQs) in fisheries management. Within the natural resource management community, there is considerable debate over the effects ITQs have on the fishing industry and fisher behavior although this approach is not well-established in the United States. The previously imposed moratorium on ITQs in the United States has expired and the 2006 reauthorization of the Magnuson-Stevens Act explicitly provides for limited access privileges (LAPs). A variety of fishers, regulators, and conservation organizations are enthusiastically seeking to introduce ITQ management. With debate over whether and how ITQs should be used in American fisheries reinvigorated, it is timely to examine the evidence on the social and economic effects of ITQs in other nations’ fisheries. After briefly summarizing the debate on ITQs, we examine the case of New Zealand, one of the earliest and longest-lived ITQ-based fisheries regimes. We use multiple data sources and methods to analyze the extent to which industry consolidation and aggregation has occurred, including surveys of industry participants, expert interviews, reviews of academic reports and analyses, analysis of trade publications, and direct analysis of quota ownership patterns. This analysis shows a more complex outcome than recent debates in the ITQ literature would predict. These findings suggest that policy makers considering ITQs can learn from the experiences of other countries related to key issues such as quota allocation, aggregation limits, transferability, cost recovery, and resource sustainability when designing ITQ and other LAP systems. It is also important to explicitly identify economic and social objectives and then carefully design ITQ regimes to meet these objectives.