水体沉积物重金属质量基准研究新进展——生物效应数据库法

根据加拿大、美国佛罗里达、澳大利亚、新西兰、中国香港等国家和地区水体沉积物质量基准研究的最新资料 ,综述了目前国际上广泛采用的用于制定沉积物质量基准的新方法——生物效应数据库法 ,介绍了该方法制定基准研究和应用的新进展     

川西高原河流水体CDOM的光化学降解特性

川西高原部分河流溶解性有机碳(DOC)含量极高,因有色溶解性有机质(CDOM)具有独特的光学特性,其光降解特征与规律对于分析高寒区天然水体DOC动态及区域水-陆碳循环具有重要的环境意义.本文选取川西高原两种主要地貌类型的河流共5条,即高山峡谷区河流杂谷脑河、抚边河及岷江,丘状高原区河流白河、黑河,对河流水体CDOM三维荧光光谱(EEMs)与紫外-可见光吸收光谱(UV-Vis)采用平行因子分析(PARAFAC)与二维相关光谱(2D-COS)进行分析.结果表明:①白河和黑河CDOM的5 d降解率分别为64. 85%和63. 43%,光降解速率常数分别为0. 167 d-1和0. 173 d-1;抚边河CDOM浓度低(0. 71 m-1)光降解现象不明显,杂谷脑河和岷江CDOM光降解行为较为复杂;②在光降解过程中,除岷江外其余4条河流荧光溶解性有机质(FDOM)内源特征(FI)逐渐减弱,黑河和白河CDOM芳香性、疏水性特征(SUVA254和SUVA260)及腐殖化程度(HIXa)逐渐降低;③川西高原5条河流中FDOM组分均呈2类4个组分,即C1(275/310 nm,类酪氨酸)、C2 [280(250)/400 nm,UVA类腐殖质]和C3(255/440 nm,UVA类腐殖质)、C4[270(360)/492 nm,UVA类腐殖质],类腐殖质FDOM较易光降解;④5条河流中UVA类腐殖质FDOM(尤其是500 nm发射波段)光降解反应先于类酪氨酸物质;丘状高原河流中UVA类腐殖质FDOM对于光照的敏感度大于高山峡谷区河流;⑤白河的主成分分析中识别出了2个因子,解释了这些参数变化的87. 28%,反映了光降解过程对于CDOM特征、荧光组分等方面的影响.     

舰用武器装备环境工程实施探讨

针对舰用武器装备经受“三高一多”的恶劣海洋环境特点,介绍了环境工程在舰用武器装备研制过程中的实施途径,包括环境工程管理,环境适应性分析、设计和试验等工作的重点,最后提出了收集环境信息、完善维护细则和进行环境整体防护等环境工程工作的建议。     

基于物理过程的矿区地下水污染风险评价

目前国内外所做的地下水污染风险评价的实例研究一般都是从地下水的脆弱性研究出发,并未过多地考虑特征污染物对污染后果的影响.脆弱性是环境对污染物的自然敏感性,而地下水污染评价中更应当体现出污染物在地下水中的迁移分布特性.为了完善地下水污染风险评价的理论和方法,以某尾矿区为例提出了基于物理过程的地下水污染风险评价方法,在污染发生之前,根据经济社会的敏感性条件和污染物将来可能的分布范围,事先划分各个污染风险等级在含水层空间上的分布范围,然后据此反推各个风险等级所对应的污染物源强,以此作为地下水污染风险评价等级的划分标准,通过对污染物在包气带和含水层中的运移进行数值模拟来评价尾矿区地下水的污染风险.结果表明,这种基于物理过程的地下水污染风险评价方法可以给出污染物浓度和风险水平在空间和时间上的分布规律,对于单个点状的污染场地来说,具有详尽的风险表征方式,优于以往基于含水层固有脆弱性指数法的风险评价方法,该方法适用于现有污染场地的风险评价、场地优化选址和为场地建设提供设计参数.     

无机纳米材料吸附分离放射性核素的研究进展

介绍了无机纳米材料特殊的理化性质,综述了纳米氧化物、纳米含氧酸盐和碳纳米管等无机纳米材料在放射性核素吸附分离中的研究进展。提出应对纳米材料进行负载、修饰或功能化研究,制备高性能的复合纳米材料,提高其稳定性和选择性;寻求更经济可行的制备方法,降低纳米材料的生产成本,逐步实现产业化;深入研究纳米材料对放射性核素的吸附机理;在辐射效应对纳米吸附剂的结构稳定性影响方面开展研究,并与现有方法作比较,评价其应用的有效性和可靠性。     

深水悬臂桥墩动力特性及地震响应分析

利用ADINA中的势流体单元对一已建成的深水高墩建模,桥梁上部结构对桥墩的影响以墩顶集中质量的形式体现,分别对不同水深条件下桥墩-水体系的动力特性和地震动响应进行了系统的求解;为了检验Morison方程在深水桥墩动力分析中的有效性,将基于忽略速度力项的Morison方程的计算结果与基于势流体的结果进行了比较.研究结果表...     

Spatial distribution of aerosol pollution based on MODIS data over Beijing, China

With the help of regression analysis,the relationships were detected between aerosol's contribution to apparent reflectance(ACR) derived from Moderate Resolution Imaging Spectroradiometer(MODIS)on board Terra and hourly PM_(10)mass concentration measured at 30 ground-based locations in Beijing for the August of 2003 and 2004.It was shown that there was a good correlation between the ACR and PM_(10)(linear correlation coefficient,R=0.56).On the basis of this relationship,spatial distribution and possible sources of PM_(10)derived from MODIS were analyzed and two frequently heavily-polluted regions were found,namely downtown of the city and the district near Xishan Mountain.These two regions coincidently are also urban heat island centers.The foundings of this paper will be greatly useful for environmental monitoring and urban planning for Beijing,especially for the 2008 Olympic game to be held in Beijing.     

Thermodynamics and kinetics of cadmium adsorption onto oxidized granular activated carbon

Cadmium sorption behavior of granular activated carbon oxidized with nitric acid was systematically studied by sets of the equilibrium and time-based experiments under various conditions.The cadmium adsorption capacity of oxidized granular activated carbon enlarged with an increase in pH,and reduced with an increase in ionic strength.Experimental data were evaluated to find out kinetic characteristics.Adsorption processes were found to follow pseudo-second order rate equation.Adsorption isotherms correlate well with the Langmuir isotherm model and the maximum sorption capacity of cadmium evaluated is 51.02μmol/g.Thermodynamic parameters were calculated based on Van't Hoff equation.Equilibrium constant Kd was evaluated from Freundlich isotherm model constants,Langmnir isotherm model constants,and isotherms,respectively.The average change of standard adsorption heatΔH~0 was -25.29 kJ/mol.NegativeΔH~0 andΔG~0 values indicate the adsorption process for cadmium onto the studied activated carbon is exothermic and spontaneous.The standard entropyΔS~0 was also negative,which suggests a decrease in the freedom of the system.     

Non-UV based germicidal activity of metal-doped TiO2 coating on solid surfaces

A stain-based screening method was developed to screen different catalyst coatings for their germicidal activity. A Baclight dead/live bacteria viability kit （invitrogen, molecular probes） was used for staining the cell. The screening was carried out following a standard procedure. This included loading cell suspension to solid surface and maintaining contact for 30 min, then staining with a mixture containing dyes. The stained cells were observed using an epifluorescent microscope and photographed with a CCD camera under UV. Metal-doped TiO2 coatings on AI plates were prepared and tested for non-UV germicidal activity without using UV. It was tested using model microorganisms such as Bakers Yeast （Saccharomyces cerevisiae）, Bacillus subtilis, Pseudomonas putida, and Escherichia coli. On the basis of the germicidal activity of catalyst and the degree of damage caused to the cells, the stained cells may appear green （viable）, green with red or yellow nuclei and yellow （compromised） or red （nonviable）. According to their stained color, cells were counted to calculate the percentage of dead, live, and compromised cells. Compromised cells are cells that grow very slowly after reculturing indicating a degree of reversible cell damage. Screening the germicidal activity using this staining method is accurate and efficient, and requires less time than the culture-based method. A modification to the procedure for measuring germicidal activity of rough surfaces or fibrous coatings was developed. Both TiO2 and metal-doped TiO2 （Ag, Pt, Au, Cu） possess non-UV based germicidal activity. The germicidal activity of TiO2 was found to be related with its wetting property and can be improved by UV irradiation before testing. It is not greatly affected by contact time, indicating a fast acting germicidal activity.     

电子产品野外环境下温循加速载荷谱编制方法

目的 将电子产品在野外环境下日变化波动与季节差异明显的温度载荷编制成温循载荷谱和转换为加速载荷谱。方法 通过四点雨流计数法提取原谱中的载荷循环信息,对提取的循环信息进行分布拟合、相关性检验等统计分析,进而构建循环均值与范围值的联合概率密度函数,再运用概率密度法,编制出8×8二维环境载荷谱。在二维载荷谱基础上,编制出温循载荷谱,使用针对电子部件参数修正的加速方程转化为加速载荷谱。结果 利用野外作业现场1个作业周期内的气温纪录,提供了一套编制温循载荷谱和转换加速载荷谱的合理化流程和解决方案。结论 该制谱方法可以利用原始环境谱中绝大部分有效信息,较好地还原电子部件野外作业阶段经历的温度变化过程,为电子产品的加速寿命试验和使用寿命预测奠定基础。