Fenton氧化去除制药企业活性污泥中AOX的效果研究

用Fenton氧化处理合成制药企业活性污泥混合液,考察了不同Fe~(2+)、H_2O_2投加量和不同反应时间下污泥与上清液中AOX(可吸附有机卤代物)的去除效果,优化了反应条件,探讨了氧化机制.结果表明,Fenton氧化的最佳条件为H_2O_2投加量0.90 mol·L~(-1),Fe~(2+)投加量0.045 mol·L~(-1)[物质的量比为:n(Fe~(2+))∶n(H_2O_2)=1∶20],反应2 h,污泥和上清液中AOX可分别去除70.7%和78.5%.GC-MS分析结果显示,污泥中含有11种有机卤代物,Fenton氧化后有8种不再检出;3种仍有检出,但浓度有所降低,去除率约为40%~50%.与此同时,污泥中对二甲苯、邻苯二甲酸二异丁酯等非有机卤代物类有毒有害有机物也得到有效去除.     

江汉平原典型土壤环境中有机磷农药的分布特征及影响因素

为了研究江汉平原土壤中有机磷农药（OPPs）的分布特征,项目组于2015年9月在地下水监测场所在区域,采集了78个剖面土和7个表层土土样,通过气相色谱-氮磷检测器（GC-NPD）分析OPPs的含量,研究江汉平原土壤中OPPs的分布特征.结果表明,研究区土壤普遍存在OPPs,其中地表土中OPPs的含量范围为89.80~193.85 ng·g^-1,平均值为140.05 ng·g^-1;剖面土中OPPs的整体含量范围为19.81~138.28 ng·g^-1,平均值为40.99 ng·g^-1.地表土和剖面土中OPPs主要检出成分均为甲胺磷、氧化乐果、二嗪农和喹硫磷等,并且根据美国土壤农药残留限量标准,研究区土壤中10种OPPs的残留量已对农产品的安全构成威胁.研究区剖面土中∑OPPs分布为：水平方向,沿河农田剖面土 > 沿河非农田剖面土 > 中部农田剖面土,即：GS1-1 > GS4 > GS2 > GS3;垂直方向,大部分剖面土随着深度的增加整体上呈先减小后增大的趋势;研究区土壤中OPPs的分布受多种因素的影响：农业生产过程中施用OPPs的量、土壤对OPPs的吸附、解吸附作用、地下水的垂直运动、研究区的地形环境、土壤有机质的含量等.     

Cu-Al2O3中骨架铜类芬顿催化去除水中有机污染物

为解决传统铁基芬顿催化剂在水体通常酸碱(pH6)条件下活性低的问题,采用简单共沉淀法制备了Cu掺杂的Al_2O_3类芬顿催化剂.通过X射线衍射(XRD)、X射线光电子能谱(XPS)和紫外可见(UV-vis)吸收光谱分析表明,Cu-Al_2O_3中铜掺杂的质量分数低于4.77%时,催化剂中铜主要以Cu~(2+)和Cu~+的形式共存于Al_2O_3的骨架结构中,形成Al—O—Cu键;过量的铜掺杂会导致外骨架铜物种如铜氧化物团簇的存在.以难降解有机污染物2-氯苯酚(2-chlorophenol,2-CP)和染料罗丹明B(Rhodamine B,Rh B)为目标污染物,对Cu-Al_2O_3的类芬顿催化性能进行了详细地研究.结果表明,骨架铜物种在中性温和条件下对2-CP和Rh B显示出很高的催化去除效率和稳定性,反应2 h,Cu-Al_2O_3(Cu质量分数4.77%)对2-CP的去除率达到54%,相应的TOC去除率达到49%,而铜离子溶出浓度仅为0.025 5 mg·L-1,而Cu-Al_2O_3(Cu质量分数7.58%)由于外骨架铜的存在导致催化活性增加缓慢和稳定性下降.ESR测试结果表明,·OH和HO_2~-/O_2~-·是反应中主要的活性物种.     

厦门湾流域河流氮污染综合溯源与水体达标策略

全球变化背景下海岸带地区面临多种环境压力,快速城镇化和人类活动导致河流与海湾营养盐污染和富营养化问题加重,污染溯源是水体达标方案编制与实施的重要环节.兼顾科学性与操作性,本文基于综合溯源思路,以厦门湾河流为例,于水质较差的枯水期开展水系沿程梯度调查,进行氮的生物地球化学过程解析,结合硝酸盐氮氧双位素及土地利用统计分析,探明氮污染关键源区和氨氮超标成因.结果表明,研究区63%的站位水中氨氮占无机氮的50%以上,沿下游方向氨氮污染加重,且与城镇与农村宅基地、渔塘的面积占比均呈正相关.土壤氮、粪肥及污水和化肥贡献了硝酸盐89%~91%的来源.最后,提出了污染减排(控源)、生态修复(增容)、以海定陆(统筹)的水体达标策略,为我国水污染防治与管理提供方法示范.     

紫外催化过硫酸盐深度处理垃圾焚烧厂渗滤液

为研究垃圾焚烧厂渗滤液生化出水的处理特性,对比了单独紫外(UV)体系、单独过硫酸盐(PS)体系以及紫外/过硫酸盐(UV/PS)体系深度处理垃圾渗滤液效果,发现UV/PS体系对渗滤液中有机污染物的去除效果较另外两体系的效果优异,因此采用UV/PS体系处理典型难降解有机物腐殖酸并考察体系的处理效能.在初始腐殖酸浓度为200...     

Effect of housing geometry on the performance of Chemcatcher passive sampler for the monitoring of hydrophobic organic pollutants in water

Passive sampling of pollutants in water has been gaining acceptance for environmental monitoring. Previously, an integrative passive sampler (the Chemcatcher) was developed and calibrated for the measurement of time weighted average concentrations of hydrophobic pollutants in water. Effects of physicochemical properties and environmental variables (water temperature and turbulence) on kinetic and thermodynamic parameters characterising the exchange of analytes between the sampler and water have been published. In this study, the effect of modification in sampler housing geometry on these calibration parameters was studied. The results obtained for polycyclic aromatic hydrocarbons show that reducing the depth of the cavity in the sampler body geometry increased the exchange kinetics by approximately twofold, whilst having no effect on the correlation between the uptake and offload kinetics of analytes. The use of performance reference compounds thus avoids the need for extensive re-calibration when the sampler body geometry is modified.     

Kosetice, Czech Republic--ten years of air pollution monitoring and four years of evaluating the origin of persistent organic pollutants

The regional observatory Kosetice is a central European background station. Unique continuous monitoring from 1988 on is held here. POP (persistent organic pollutant) concentration values of air samples from Kosetice taken between 1996 and 2005 were statistically processed. Values of Czech ambient air quality standards were not exceeded. Concentrations of polycyclic aromatic hydrocarbons reached two maxima, in 1996 and 2001-2002. Polychlorinated biphenyls concentrations reached the highest values in 1997 and 1998 and hexachlorocyclohexanes concentrations in 1998. DDTs, hexachlorobenzene and pentachlorobenzene were analysed as well. Long-range transport of pollutants between 2002 and 2005 was evaluated using the Potential Source Contribution Function hybrid receptor model. Indicated potential source areas of PCBs coincide with many well-known urban and industrialised areas, while the indicated potential source areas of HCHs and DDTs coincide with many agricultural and/or forested regions and the potential source areas of HCB comprise all land use types.     

Relationships between organic matter, black carbon and persistent organic pollutants in European background soils: Implications for sources and environmental fate

Black carbon (BC) and total organic carbon (TOC) contents of UK and Norwegian background soils were determined and their relationships with persistent organic pollutants (HCB, PAHs, PCBs, co-planar PCBs, PBDEs and PCDD/Fs) investigated by correlation and regression analyses, to assess their roles in influencing compound partitioning/retention in soils. The 52 soils used were high in TOC (range 54-460 mg/g (mean 256)), while BC only constituted 0.24-1.8% (0.88%) of the TOC. TOC was strongly correlated (p < 0.001) with HCB, PCBs, co-PCBs and PBDEs, but less so with PCDD/Fs (p < 0.05) and PAHs. TOC explained variability in soil content, as follows: HCB, 80%; PCBs, 44%; co-PCBs, 40%; PBDEs, 27%. BC also gave statistically significant correlations with PBDEs (p < 0.001), co-PCBs (p < 0.01) and PCBs, HCB, PCDD/F (p < 0.05); TOC and BC were correlated with each other (p < 0.01). Inferences are made about possible combustion-derived sources, atmospheric transport and air-surface exchange processes for these compounds.     

Competition between phenanthrene, chrysene, and 2,5-dichlorobiphenyl for high-energy adsorption sites in a sediment

We determined the maximum amounts of added phenanthrene, chrysene, and 2,5-dichlorobiphenyl sorbed onto high-energy adsorption sites in a sediment on bi-solute experiments. The bi-solute pairs were phenanthrene/chrysene and phenanthrene/2,5-dichlorobiphenyl. On the bi-solute sorption experiments, one solute was introduced and equilibrated with sediment prior to addition of the second solute. The values for the maximum amounts adsorbed onto high-energy sites revealed that, after equilibration of the first solute, still some high-energy sites could be occupied by the second solute. Phenanthrene, chrysene, and 2,5-dichlorobiphenyl seem to share about 30% of the accessible high-energy adsorption sites in the sediment employed.