Low-carbon transition of iron and steel industry in China: Carbon intensity, economic growth and policy intervention

As the biggest iron and steel producer in the world and one of the highest CO₂ emission sectors, China's iron and steel industry is undergoing a low-carbon transition accompanied by remarkable technological progress and investment adjustment, in response to the macroeconomic climate and policy intervention. Many drivers of the CO₂ emissions of the iron and steel industry have been explored, but the relationships between CO₂ abatement, investment and technological expenditure, and their connections with the economic growth and governmental policies in China, have not been conjointly and empirically examined. We proposed a concise conceptual model and an econometric model to investigate this crucial question. The results of regression, Granger causality test and impulse response analysis indicated that technological expenditure can significantly reduce CO₂ emissions, and that investment expansion showed a negative impact on CO₂ emission reduction. It was also argued with empirical evidence that a good economic situation favored CO₂ abatement in China's iron and steel industry, while achieving CO₂ emission reduction in this industrial sector did not necessarily threaten economic growth. This shed light on the dispute over balancing emission cutting and economic growth. Regarding the policy aspects, the year 2000 was found to be an important turning point for policy evolution and the development of the iron and steel industry in China. The subsequent command and control policies had a significant, positive effect on CO₂ abatement.     

黑色金属材料在长江淡水中的腐蚀行为

通过现场暴露试验,获得了2种碳钢、3种不锈钢及1种不锈钢与碳钢复合板材料在武汉长江淡水中的4年腐蚀试验结果,总结了它们的腐蚀行为。结果表明,Q235和16Mn碳钢在武汉长江中有较高的腐蚀率和明显的点蚀,稳定腐蚀率为0.055 mm/a;暴露4 a,奥氏体不锈钢304和316L没有明显腐蚀,而马氏体不锈钢430有较明显的点蚀和缝隙腐蚀;马氏体不锈钢0Cr13Ni5Mo与Q345C复合钢板在长江淡水中使用4 a后,0Cr13Ni5Mo发生严重的点蚀,说明马氏体不锈钢在淡水中的应用应慎重。     

钢渣对水体中磷的去除性能及机制解析

针对不同类型钢渣在除磷过程中存在的显著差异,以电炉渣为研究对象,探讨了环境因素（吸附时间、吸附温度）对钢渣除磷的影响,验证了其对磷酸盐、焦磷酸盐及实际水体的除磷效果,联合采用扫描电镜（SEM）、能量色散X射线能谱（EDS）、X射线荧光光谱（XRF）和X射线衍射光谱（XRD）技术探究其除磷机制,对比分析了钢渣与陶粒和沸石的除磷效率,并对钢渣除磷的安全性能进行了评估.结果表明,吸附时间显著影响钢渣除磷效果,当吸附时间为30 min时钢渣对质量浓度范围为1~20 mg·L^-1的磷酸盐溶液的去除率均可达到97%以上.温度对实验所用钢渣的除磷效果影响并不显著.钢渣对焦磷酸盐吸附能力弱于正磷酸盐,其对初始质量浓度为3 mg·L^-1的焦磷酸盐的去除率为82.45%.光谱分析结果表明,钢渣除磷的主要机制为化学吸附并辅以物理吸附,CaHPO₄·2H₂O为主要沉淀物质.钢渣对生物池出水和湿地系统中的磷素去除效果显著,总磷去除率分别为98.36%和93.33%.对比可知,钢渣对磷酸盐的去除效果优于陶粒和沸石,其对PO₄^3-的去除率分别为96%、40%和10%.钢渣浸出液中各重金属含量均符合地表水Ⅰ类标准要求,钢渣安全可靠.     

高温高含二氧化碳条件下五种含Cr钢适用性评价

目的 预测某高温高含二氧化碳油井中管柱的腐蚀情况,为该油井推荐安全经济的材质。方法 采用高温高压反应釜模拟现场工况进行腐蚀试验,通过失重法、扫描电子显微镜(SEM)和X射线能谱分析(EDS)对五种含Cr钢的适用性进行评价。结果 在40~160 ℃温度范围内,五种钢材随温度的升高,其均匀腐蚀速率先升高后降低,且均在80 ℃时达到最大值。3Cr钢的腐蚀速率最高,在整个温度范围内,均远高于0.076 mm/a。在温度为120 ℃时,9Cr钢开始出现局部腐蚀。在温度为160 ℃时,13Cr钢有一定的局部腐蚀倾向。S13Cr、22Cr钢在整个温度范围内的腐蚀速率都较低,试验后试样表面平整连续,耐蚀性能好。结论 建议在采出井井筒中上部40~80 ℃较低温度井段选用9Cr钢,中部80~120 ℃中高温井段选用13Cr钢,底部120~160 ℃高温井段选用S13Cr钢。     

钢在自然环境中的大气腐蚀研究进展

回顾了近年来钢在自然环境中的大气暴露腐蚀试验和腐蚀行为预测的研究。重点介绍了钢的腐蚀失重规律、环境因素和钢的化学成分对钢的大气腐蚀影响以及锈层分析的研究;此外,还介绍了幂函数预测模型、灰色模型和神经网络预测模型的研究进展。     

冷轧浓油废水预处理设施的设计与运行

就宝钢不锈钢有限公司配套建设的冷轧浓油废水处理工程的浓油废水预处理设施的设计与运行进行了介绍和分析,可作为相似工程中的借鉴和参考。     

X70钢在碳酸氢钠溶液中的腐蚀行为研究

通过电化学试验方法对X70钢在NaHCO3溶液中的腐蚀行为进行了研究.实验结果表明,当NaHCO3质量分数低于0.10%时,极化曲线呈现阳极活化溶解过程,高于0.10%时阳极极化出现钝化过程,并且在-0.6 V(vs.SCE)左右出现了一个新的小电流峰.通过对交流阻抗谱分析发现,高频区均是由略偏离半圆的容抗弧组成,并且实部有所收缩.HCO3-的还原反应在阴极过程中起主要作用,整个过程受极化控制.X70钢在NaHCO3溶液中的腐蚀速度随着NaHCO3质量分数的增大而增大,在试验结束后,对试样表面的腐蚀形貌进行了观察,并利用XRD分析出腐蚀产物主要为FeO(OH)和Fe3O4.     

Comparative study of microbial community structure in di erent filter media of constructed wetland

Comparisons of microbial community structure, in eight filter media of zeolites, anthracite, shale, vermiculite, ceramic filter media, gravel, steel slag and bio-ceramic, were undertaken by analyzing the phospholipid fatty acid (PLFA) composition. A total of 20 fatty acids in the range of C11 to C20 were determined but only 13 PLFAs were detected in steel slag. They consist of saturated fatty acids, branched fatty acids, monounsaturated fatty acids, and polyunsaturated fatty acids. The variation of fatty acids was revealed in the relative proportions of these fatty acids in di erent media. The aerobic prokaryotes were the predominant group in all media. The PLFA composition showed significant di erences among the eight di erent media by Tukey’s honestly test. It was found that steel slag was significantly di erent in the microbial community as compared to other filter media, probably due to its alkaline e uent. Steel slag alone is probably not a good choice of substratum in constructed wetlands. The principle components analysis (PCA) showed that zeolites, bio-ceramic, shale and vermiculite had a similar microbial community structure while steel slag and ceramic filter media were distinct from other media.     

近20年来中国典型区域PM2.5时空演变过程

近20年来PM_(2.5)污染严重制约了中国可持续发展.长时间序列历史监测数据的缺失阻碍了相关研究.为此,本文以四大典型区域2013~2016年的PM_(2.5)浓度监测值和2000~2016年MODIS AOD数据、边界层高度、温度等气象数据作为基础数据,将反向人工神经网络和支持向量回归机两种算法相结合,构建组合模拟模型,并利用地理空间分析技术实现近20年来PM_(2.5)浓度历史变化过程的情景再现.研究结果表明,组合模型具有较低的误差和更高的泛化能力;时空分析结果表明,2000~2010年京津冀和东三省PM_(2.5)浓度持续增长,珠三角PM_(2.5)浓度缓慢下降,3个研究区PM_(2.5)污染范围呈扩大趋势,长三角PM_(2.5)浓度值及污染范围基本保持稳定.2012年4个研究区PM_(2.5)浓度值降低且污染范围缩小,但2013~2016年PM_(2.5)浓度略微上升后又下降,高污染范围缩小,这与国家采取PM_(2.5)区域联防等治理措施有关.     

钢铁工业氮氧化物污染防治途径研究

针对钢铁工业氮氧化物减排的紧迫形势,首先介绍了钢铁工业氮氧化物主要排放源,提出了烧结工序和自备电厂是氮氧化物排放的主要污染源,其烟气中氮氧化物控制是钢铁企业氮氧化物减排的重点;其次对钢铁工业氮氧化物生成机理,热力型、燃料型、快速型进行了分析;在此基础上,总结了钢铁工业烧结、自备电厂、焦化、炼铁、轧钢工序氮氧化物污染防治技术途径,为钢铁工业进一步开展氮氧化物减排工作提供了技术支撑.