The Aging of America's Reservoirs: In‐Reservoir and Downstream Physical Changes and Habitat Implications

Reservoirs are important for various purposes including flood control, water supply, power generation, and recreation. The aging of America's reservoirs and progressive loss of water storage capacity resulting from ongoing sedimentation, coupled with increasing societal needs, will cause the social, economic, environmental, and political importance of reservoirs to continually increase. The short‐ and medium‐term (<50 years) environmental consequences of reservoir construction and operation are well known and include an altered flow regime, lost connectivity (longitudinal, floodplain), an altered sediment regime, substrate compositional change, and downstream channel degradation. In general, reservoir‐related changes have had adverse consequences for the natural ecosystem. Longer term (>50 years) environmental changes as reservoirs enter “old” age are less understood. Additional research is needed to help guide the future management of aging reservoir systems and support the difficult decisions that will have to be made. Important research directions include assessment of climate change effects on aging and determination of ecosystem response to ongoing aging and various management actions that may be taken with the intent of minimizing or reversing the physical effects of aging.     

BiOCl/TiO_2复合材料的可见光活性及机理研究

采用水热法和溶胶凝胶法制备新型BiOCl/TiO2复合材料并明确了最优的掺杂比例(2%).随后利用X射线衍射(XRD)、紫外可见漫反射(DRS)、透射电镜(TEM)和X射线光电子能谱(XPS)对该材料进行表征.由于禁带宽度较大,纯BiOCl和TiO2的可见光催化性能极差,然而二者复合后,同条件下的苯降解率却大幅提升,可以达到40%以上.经证实,催化剂制备过程中,Bi的状态发生变化,在TiO2导、价带之间插入新的能级,使其禁带宽度变窄,电子可以实现可见光跃迁.     

Synthesis, crystal structure, photodegradation kinetics and photocatalytic activity of novel photocatalyst ZnBiYO4

ZnBiYO₄ was synthesized by a solid-state reaction method for the first time. The structural and photocatalytic properties of ZnBiYO₄ were characterized by X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy and UV-Vis diffuse reflectance. ZnBiYO₄ crystallized with a tetragonal spinel structure with space group I41/A. The lattice parameters for ZnBiYO₄ were a = b = 11.176479 Å and c= 10.014323 Å. The band gap of ZnBiYO₄ was estimated to be 1.58 eV. The photocatalytic activity of ZnBiYO₄ was assessed by photodegradation of methyl orange under visible light irradiation. The results showed that ZnBiYO₄ had higher catalytic activity compared with N-doped TiO₂ under the same experimental conditions using visible light irradiation. The photocatalytic degradation of methyl orange with ZnBiYO₄ or N-doped TiO₂ as catalyst followed first-order reaction kinetics, and the first-order rate constant was 0.01575 and 0.00416 min^-1 for ZnBiYO₄ and N-doped TiO₂, respectively. After visible light irradiation for 220 min with ZnBiYO₄ as catalyst, complete removal and mineralization of methyl orange were observed. The reduction of total organic carbon, formation of inorganic products, SO₄^2- and NO₃^-, and evolution of CO₂ revealed the continuous mineralization of methyl orange during the photocatalytic process. The intermediate products were identified using liquid chromatography- mass spectrometry. The ZnBiYO₄/(visible light) photocatalysis system was found to be suitable for textile industry wastewater treatment and could be used to solve other environmental chemical pollution problems.     

Analysis of trace dicyandiamide in stream water using solid phase extraction and liquid chromatography UV spectrometry

An improved method for trace level quantification of dicyandiamide in stream water has been developed. This method includes sample pretreatment using solid phase extraction. The extraction procedure (including loading, washing, and eluting) used a flow rate of 1.0 mL/min, and dicyandiamide was eluted with 20 mL of a methanol/acetonitrile mixture (V/V = 2:3), followed by pre-concentration using nitrogen evaporation and analysis with high performance liquid chromatography–ultraviolet spectroscopy (HPLC–UV). Sample extraction was carried out using a Waters Sep-Pak AC-2 Cartridge (with activated carbon). Separation was achieved on a ZIC^®-Hydrophilic Interaction Liquid Chromatography (ZIC-HILIC) (50 mm × 2.1 mm, 3.5 μm) chromatography column and quantification was accomplished based on UV absorbance. A reliable linear relationship was obtained for the calibration curve using standard solutions (R² > 0.999). Recoveries for dicyandiamide ranged from 84.6% to 96.8%, and the relative standard deviations (RSDs, n = 3) were below 6.1% with a detection limit of 5.0 ng/mL for stream water samples.     

Ecotect在建筑玻璃幕墙光反射影响评价中的应用研究

将Ecotect软件应用到建筑玻璃幕墙光反射影响评价中,应用结果表明,Ecotect软件能准确地确定建筑玻璃幕墙反射光的影响范围,且能准确地确定幕墙遮阳设施或周围建筑的遮挡效果,这可大大加强建筑玻璃幕墙光反射影响评价的准确性.另外,Ecotect软件还可准确地分析出受影响的敏感目标或敏感目标受照反射光的来源,这可使幕墙设计者有针对性对受影响敏感目标或对敏感目标产生反射光影响的建筑玻璃幕墙立面采取预防控制措施,来降低或者消除光反射,从而从源头上减少或消除幕墙反射光对周围环境敏感目标的影响.     

HF对Cu-SSZ-13/堇青石的原位合成及脱除NO_x的影响

以Cu-TEPA为模板剂原位水热合成一系列具有优良deNOx特性的Cu-SSZ-13/堇青石整体式催化剂.为进一步改善其氨的选择性催化还原氮氧化物的活性,在制备过程中添加HF对原位制备Cu-SSZ-13/堇青石整体式催化剂进行改性.利用XRD、SEM、XPS、BET、ICP-AES等对样品进行了表征.结果表明,当nHF/nAl在0.015—0.0375时,晶化72 h的Cu-SSZ-13/堇青石表现出了优异的脱硝性能和抗老化性能,其最大转化率为99.8%,NOx转化率保持在90%以上的最宽活性温度窗口为280—640℃,而无HF的新鲜样品的NOx转化率保持在90%以上的活性温度窗口为300—580℃;720℃老化50 h处理后,nHF/nAl=0.015—0.0375样品的NOx转化率保持在90%以上的最宽活性温度窗口为360—520℃,未添加HF的老化样品相应的活性温度窗口为400—500℃.无论新鲜还是老化,nHF/nAl=0.015—0.0375样品在低温段200—300℃和高温段500—700℃的NOx转化率基本都大于未添加HF的样品.结合表征结果,在催化剂原位水热合成过程中HF的加入既提高了样品的相对结晶度和负载量,又增大了样品的比表面积和比孔容,且提高了Cu-SSZ-13/堇青石骨架结构的稳定性,进而在一定程度上改善了Cu-SSZ-13/堇青石的高温脱硝活性和水热稳定性.     

蒙脱土原位生长MoS2复合材料光催化降解罗丹明B的机理研究

通过在Na⁺-MMT表面生长MoS₂来提高窄带隙半导体光生电子分离速率及稳定性.利用阳离子填充法及水热法成功制备了复合光催化剂Na⁺-MMT/MoS₂,并通过FT-IR、SEM、TEM、Raman、XRD、TG、XPS、UV-DRS和ESR等表征进一步证明了材料的成功负载及光、电化学性能. 同时,以有机染料罗丹明B为待降解染料来评价光催化剂的催化性能,发现其在80 min可有效降解罗丹明B,降解率达96%.经过5次循环使用后,Na⁺-MMT/MoS₂复合光催化剂仍具有较好的光催化性能.因此,利用MMT的表面电负性及稳定的片层结构负载MoS₂,可形成光生电子迁移通道进一步提高电荷迁移速率及光催化剂的稳定性.本研究可为黏土材料调控窄带隙半导体制备环境友好型光催化剂提供新思路.     

介质阻挡放电等离子体老化微塑料及对Zn (II)吸附的影响

为了在实验中缩短微塑料的老化时间,更真实地模拟自然老化条件,采用介质阻挡放电（DBD）等离子体老化聚乙烯微塑料（PE-MP）和聚丙烯微塑料（PP-MP）,同时研究了老化前后PE-MP和PP-MP对Zn （II）的吸附过程和机理.随着放电时间延长和输入电压升高,微塑料表面出现微小裂纹或孔洞,形成含氧官能团.老化后PE-MP和PP-MP对Zn （II）的吸附容量分别提高了22.7%和14.8%.老化前后微塑料对Zn （II）的吸附均符合准二级动力学模型.颗粒内扩散模型表明,Zn （II）在微塑料上的吸附过程可分为快速吸附,慢速吸附和吸附平衡3个阶段.同时,老化前后微塑料对Zn （II）的吸附均符合Langmuir吸附等温线模型.热力学结果表明,微塑料对Zn （II）的吸附是自发的吸热过程.Ca²⁺、腐殖酸和低pH值不利于微塑料对Zn （II）的吸附.     

民用煤排放PM2.5中碳组分与水溶性离子特征

研究4种典型民用煤燃烧排放PM_2.5中的碳组分以及水溶性离子含量特点,并通过PAM-OFR(潜在气溶胶质量-氧化流动反应器)模拟了大气老化过程(2d)对煤球与烟煤燃烧PM_2.5中碳组分与水溶性离子含量的变化影响。结果表明,烟煤燃放PM_2.5中碳组分含量最高,达到57.96%,其EC含量是其他煤种的4.3~9.6倍。民用煤燃烧产生PM_2.5中水溶性离子以Na⁺与SO₄^2-为主,其在总水溶性离子中占比合计约47%~76%。经历了大气老化试验后,煤球与烟煤燃烧排放PM_2.5中NH₄⁺和NO₃^-离子含量大幅增加,与之相比,TC占PM_2.5比例分别下降了12.03%与19.99%。     

车用高分子材料不同地区户外曝晒试验相关性研究

目的将3种高分子材料以及3种车用外饰材料分别投放在中国海南琼海和美国佛罗里达州2种典型湿热环境中进行户外曝晒试验,研究气候相似的2种地区的试验相关性。方法通过测试相同时间间隔下不同材料在2处试验场曝晒过程中的黄变程度,表征材料的老化现象。采用斯皮尔曼等级相关系数的统计方法,研究材料在2个地区相同时间节点的试验结果的相关性,并利用时间同轴的作图方法比较2个地区严酷度的差异。结果琼海与佛罗里达州2个地区在各个时间节点的相关系数接近于1,且在材料黄变方面呈现一定比例关系。结论琼海和佛罗里达州2个地区的试验结果呈现出较好的相关性,且严酷度比值约为琼海︰佛罗里达=1︰1.19。