北京大气中异戊二烯的季变化、日变化形式及影响因素研究

对2005年北京大气中异戊二烯进行了一年的观测分析。结果表明,异戊二烯体积分数年平均值为0.58×10^-9,月平均值为0.1×10^-9～1.8×10^-9,7月最高,1月最低。春、秋、冬三季,异戊二烯日变化形式呈三峰形,分别在14:00、18:00、02:00;18:00、02:00、08:00;02:00、10:00、16:00出现峰值;夏季异戊二烯体积分数日变化呈现白天高夜晚低且在14:00出现峰值。夏季异戊二烯源排放主要由生物排放控制,其日变化形式受温度、辐射影响大;春季和秋季异戊二烯源排放受汽车尾气和生物排放共同控制,其日变化形式受汽车尾气影响大,温度、辐射也有一定影响;冬季异戊二烯源排放主要由汽车尾气控制,其日变化形式主要受汽车尾气影响。不同季节北京大气中的异戊二烯体积分数日变化形式与PM_2.5浓度日变化形式大致相同。     

重庆市内环货车错时限行对空气质量的影响

在分析货车实施错时限行后内环车流量时段分布变化基础上,通过对PM_(2.5)、NO_2等指标的ADMS模型模拟和实际监测数据对比分析,探讨了内环货车错时限行对环境空气质量的影响。结果表明,货车错时限行后主城区环境空气中PM_(2.5)、NO_2小时平均质量浓度分别降低了9.4%和6.0%,峰值浓度明显降低,晚上出现峰值时间往后推移了2~3 h。经ADMS模型模拟计算,内环高峰时段机动车排放对主城区NO_2、PM、VOCs的浓度贡献分别降低了54.1%、56.3%、17.5%,CO浓度贡献不大。内环货车错时限行措施对重庆市主城区空气质量的改善有一定的积极作用。     

街道峡谷内车辆流动对反应性污染物传播特性影响的模拟研究

采用CFD（计算流体力学）数值模拟的研究方法,使用动网格技术,分析简单光化学反应下车辆流动及不同来流风速对双车道三维街道峡谷内污染物传播特性的影响.结果表明,车辆移动改变了峡谷内气流结构,以及背风侧与迎风侧活性污染物浓度分布的相对大小,有利于污染物在峡谷中的传播扩散;来流风使机动车尾气向建筑背风侧汇聚,并随着风速增加而加强,对近迎风侧车道车辆尾气淹没射流的影响比近背风侧车道大.在车辆移动与来流风的综合作用下,污染物的扩散能力得到显著增强.     

Trip-Based Explanatory Variables For Estimating Vehicle Fuel Consumption and Emission Rates

The current state-of-practice in the US for estimatingvehicle emissions is based on a single traffic-relatedexplanatory variable, namely average speed. Research,however, has demonstrated that the use of average speed asa single traffic-related variable is insufficient for theestimation of vehicle emissions. For example, although theEnvironmental Protection Agency (EPA) MOBILE5 model wouldindicate that a slowing of traffic typically increasesemissions, empirical research indicates the opposite inmany cases.The objective of this paper is to identify criticalaggregate trip variables as potential explanatory variablesfor the estimation of a vehicle's fuel consumption andemissions. Subsequently, statistical models for estimatingfuel consumption and emissions of hydrocarbon (HC), carbonmonoxide (CO), and oxides of nitrogen (NO_x) aredeveloped using these critical variables that include theaverage speed, speed variability, the level ofdeceleration, and the level of acceleration. The proposedmodels are demonstrated to be consistent with microscopicenergy and emission model estimates that are based on thevehicle's instantaneous speed and acceleration levels(coefficient of determination ranges from 0.88 to 0.96).     

提高交通安全——实现智能汽车的研究

主要介绍了通过智能汽车的研究 ,提高城市交通安全的必要性 ;综述了发达国家关于智能汽车研究的现状与趋势 ,并通过国外智能汽车发展的趋势 ;进一步论证智能汽车的研究是汽车工业发展的方向 ,也是提高交通安全的重要手段之一。此外 ,论文提出利用模式识别技术的智能汽车的结构框架 ;指出神经网络方法应用与模式识别技术结合的优势。最后 ,论文在阐述我国需要发展智能汽车的同时 ,提出应结合中国国情相应研究相关理论 ,为今后的实施奠定基础的近期目标 ,并提出展望     

城市汽车空气污染控制基准研究

本文论述了城市汽车空气污染研究的目标、基本方法及城市汽车污染控制区的划分原则和方法.汽车类型流动源采用整个控制区平均浓度作为分析对比的基础不合适,应该专门研究确定基准控制点.为了合理选择确定控制计算点,提出3种方法:峰值法、核心区和重点控制区法、9点平均法.9点平均法可以有效增加各类污染源的敏感点,同时又可避免增加该点位影响过大的缺陷.这种方法在其他类型大气污染源控制中也能发挥作用.     

广元飞播造林成效与流域生态环境效益研究

运用川北广元历年飞播成效调查以及固定标准地观测的结果,结合笔者从事飞播造林技术与管理工作的经验,得出：飞播造林是速度快、省劳力、投资少、成本低、效益高的造林方式,推广飞机播种造林是绿化川北山地,迅速治理流域生态环境和实现山区经济可持续发展的有效措施     

Integrated energy management strategy of powertrain and cooling system for PHEV

ABSTRACT

Energy management strategy (EMS) is crucial in improving the fuel economy of plug-in hybrid electric vehicle (PHEV). Existing studies on EMS mostly manage powertrain and cooling system separately which cannot get the minimum total energy consumption. This paper aims to propose a novel EMS for a new type of dual-motor planetary-coupled PHEV, which considers cooling power demand and effect of temperature on fuel economy. Temperature-modified engine model, lithium-ion battery model, two motors, and cooling system models are established. Firstly, the separated EMS (S-EMS) is designed which manages powertrain and cooling system separately. Sequentially, after the analysis of thermal characteristics of the powertrain and cooling system, the thermal-based EMS (T-EMS) is then proposed to manage two systems coordinately. In T-EMS, cooling power demand and the charging/discharging energy of motors are calculated as equivalent fuel consumption and integrated into the object function. Besides, a fuzzy controller is also established to deicide the fuel-electricity equivalent factor with consideration of the effect of temperature and state of charge on powertrain efficiency. Finally, the hardware-in-loop experiment is carried out to validate the real-time effect of EMS under the New European Driving Cycle. The result shows that cooling power demand and temperature can significantly affect the fuel economy of the vehicle. T-EMS shows better performance in fuel economy than S-EMS. The equivalent fuel consumption of the cooling system of T-EMS decreases by 27% compared with that of S-EMS. The total equivalent fuel consumption over the entire trip of PHEV using T-EMS is reduced by 9.7%.     

Status of recycling end-of-life vehicles and efforts to reduce automobile shredder residues in Korea

The present end-of-life vehicle (ELV) recycle rate and management status during the dismantling stage were investigated to aid the establishment of policies for the management of ELVs by surveying information and using the results gained from questionnaires given to dismantlers. The average recycle rate at the dismantling stage was 44% of the mass of a new vehicle and the rest of the ELV was then compressed and transported to shredding companies to recover mainly the iron content, which averaged 38.7% of the mass of a new vehicle. Nonferrous metals such as copper, antimony, zinc, and aluminum accounted for only 1.5%. The automobile shredder residues (ASRs) were composed of light and heavy fluffs and soil/dust and amounted to 15.8% based on the mass of a new vehicle. The dumping of fluff and inorganic residues in landfill sites, however, will be restricted when new regulations are implemented to reduce the disposal amount to less than 5% of a new car, as has been done in European countries and in Japan. The detailed characteristics of ASR were investigated to suggest appropriate means of treatment such as volume reduction or the utilization of thermal technologies to meet future expected enforcement. Also, some concerns on hazardous pollutant release such as that of dioxins while utilizing such thermal treatment methods were considered. The present on-going research and development projects to meet such future management targets are also introduced.     

交通事故再现技术研究现状与发展趋势

道路交通事故再现不仅是交通事故责任鉴定和原因分析的重要方法,也是交通事故防治的重要内容。在详细介绍国内外事故再现计算机仿真技术的基础上,分析目前事故再现系统开发中事故现场数据采集技术、碰撞前后速度估算的技术、碰撞过程进行模拟的虚拟现实技术的研究现状与存在的问题,提出进一步优化的方向,进而达到完善交通事故模拟再现的目的。最后指出我国交通事故再现技术进一步研究的内容和发展趋势。