Formation of aerobic granules in the presence of a synthetic chelating agent

This paper examines the development of aerobic granular sludge in the presence of a synthetic chelating agent, nitrilotriacetic acid (NTA), in sequencing batch reactors (SBR). The growth of seed sludge at 0.26 mM, 0.52 mM and 1.05 mM of NTA was found to be significantly lower as compared to that in the absence of NTA. Aerobic granulation was significantly enhanced in the three SBRs (R2, R3 and R4), which were fed with 0.26 mM, 0.52 mM and 1.05 mM of NTA as a co-substrate, in comparison to the acetate-alone fed SBR (R1). After 2 months of operation, the mean diameter of the biomass stabilized at 0.35 mm in R1 (acetate alone), as compared to 2.18 mm in R4 (1.05 mM NTA+acetate). NTA degradation was established in SBRs, with almost complete removal during the SBR cycle. Batch experiments also showed efficient degradation of NTA by the aerobic granules.     

Adsorption of a dye on clay and sand. Use of cyclodextrins as solubility-enhancement agents

Laboratory-scale studies were aimed at elucidating the physico-chemical aspects on the removal process of crystal violet (CV) from waters and solid substrates. The laponite clay (RD) and sand were chosen for the double aim at investigating them as CV adsorbents for water treatment and as substrates which mime the soil components. Sand is very effective in removing CV from waters. The cyclodextrins (CDs) were exploited as solubility-enhancement agents to remove CV from the solid substrates. They are powerful solvent media because they extract the CV from sand forming water-soluble CV/CD inclusion complexes and do not show affinity for sand. Optimum performance was shown by the modified CDs (i.e. hydroxypropyl-β-cyclodextrin and methyl-β-cyclodextrin). A linear correlation between the logarithm of the equilibrium constant for the CV/CD inclusion complexes formation (K_cpx) and the maximum amount of CV extracted from sand in the columns experiments at a flow rate of 1.5 ml min⁻¹ was drawn. This relationship predicts that CDs with K_cpx < 180 M⁻¹ are not suitable for CV removal from sand. CDs failed to displace CV from RD because they generate the formation of RD clusters where CV remains entrapped.     

用改性海泡石处理含磷废水

以海泡石为原料,经盐酸活化、水热活化,再加入氯化镁、氯化铁复合制得除磷剂原粉;再用聚氯乙烯将除磷剂原粉黏合成粒状除磷剂。用粒状除磷剂对废水中的磷（PO4^3-）进行吸附、洗脱,考察除磷剂的循环使用性能。实验结果表明：除磷剂对废水中磷的吸附容量可达92m g/g以上;以碳酸钠为洗脱剂,磷的洗脱率可达90%以上;除磷剂可重复使用,且性能优良。     

用造纸污泥制备改性木质素磺酸钠

以甲醛作改性剂,用造纸污泥制备改性木质素磺酸钠,通过正交实验考察了各种因素对改性木质素磺酸钠减水性能的影响。实验结果表明：木质素磺酸钠进行羟甲基化反应时,在10g粗品木质素中加入甲醛7mL、反应温度为45℃、反应液pH为10—11的最佳条件下,改性木质素磺酸钠的减水率为25．2％。经测试,改性木质素磺酸钠的各项性能指标均达到普通减水剂的国家标准要求。     

工业型煤复合粘结剂的研制

根据高聚物相似互溶、扩散渗透原理,采用苎麻黑液、造纸黑液、酒糟废水、淀粉黄浆废水等10种高浓度有机废水(液)作为原料,研制成用于工业型煤的复合粘结剂,使高浓度有机废水(液)得到经济、合理的资源利用。这种粘结剂中含有多种天然高分子物质,可交联成三维空间网状结构,使工业型煤具有较高的机械强度和防潮抗水性能,并同时解决了燃煤和高浓度有机废水(液)的环境污染问题。     

利用造纸黑液制水煤浆添加剂新技术

生产水煤浆所需的添加剂，因价格居高不下而影响这种煤基液体燃料的发展。利用碱法造纸黑液和经改造的造纸生产设备，将浓缩黑液稍加酸化、磺化处理后在一定压力、温度下反应，可制成性能良好的添加剂，利用该添加剂生产１吨水煤浆只增加约１０元成本。     

用镍矿渣生产建筑砌块研究

以碱激发磨细镍矿渣作为胶结材料，用破碎后的镍矿渣作为集料，研究了镍矿渣含量为９４％，抗压强度达２８９ＭＰａ的镍矿渣建筑砌块。该种建筑砌块的研制成功，为镍矿渣的处理，开辟了一条途径。     

化学湿润剂的湿润能力试验

用氯化钙、水玻璃、丁二酸钠、十二烷基磺酸钠和十二烷基苯磺酸钠等５种化学湿润剂对４种现场采集的粉尘进行正向渗透试验，结果表明：这些化学湿润剂均能改善水湿润粉尘的能力。     

改性PAC的制备及其对染料废水脱色的实验研究

通过用改性絮凝剂对酸性黑210#进行脱色,研究了在改性PAC(引入SO42-)中加入了PAM,改进其絮凝性能的工艺条件.结果表明,改性过程中,改性PAC和PAM的最佳比是240:1,适宜的改性时间和改性温度分别是2 h和50℃.改性产品与市售聚合氯化铝相比,可在较少的投加量时达到较高的脱色率.     

钙质煤渣脱硫剂与烟气脱硫的试验研究

利用锬本身排出的煤渣作硫剂基体核粒，配入少量的石灰，并加水搅拌均匀，使石灰裹覆在煤潭颗粒表面，制成具有较大 的钙质煤渣脱硫剂，并用于烟气脱硫（干法）试验。结果表明：脱硫率最高达８５．５％￣９４．６％，脱硫率大于８０％的运行时间达２ｈ，脱硫费用约为０．３３元／ｋｇ（ＳＯ２）。