AN INTEGRATED ONE‐DIMENSIONAL AND TWO‐DIMENSIONAL URBAN STORMWATER FLOOD SIMULATION MODEL1

ABSTRACT: Flash flooding is the rapid flooding of low lying areas caused by the stormwater of intense rainfall associated with thunderstorms. Flash flooding occurs in many urban areas with relatively flat terrain and can result in severe property damage as well as the loss of lives. In this paper, an integrated one‐dimensional (1‐D) and two‐dimensional (2‐D) hydraulic simulation model has been established to simulate stormwater flooding processes in urban areas. With rainfall input, the model simulates 2‐D overland flow and 1‐D flow in underground stormwater pipes and drainage channels. Drainage channels are treated as special flow paths and arranged along one or more sides of a 2‐D computational grid. By using irregular computation grids, the model simulates unsteady flooding and drying processes over urban areas with complex drainage systems. The model results can provide spatial flood risk information (e.g., water depth, inundation time and flow velocity during flooding). The model was applied to the City of Beaumont, Texas, and validated with the recorded rainfall and runoff data from Tropical Storm Allison with good agreement.     

Results from Three Field Tracer Experiments on the Neighbourhood Scale in the City of Birmingham UK

The physical processes governing flow and pollutantdispersion at the neighbourhood scale, a spatial scaleintermediate between the street scale and the city scale, is notwell understood. Furthermore, it is not clear whether a traditional approach using averaged characteristics such as theaerodynamic roughness length is sufficient to predict the concentration field at this scale. To investigate pollutant dispersion in a real urban area, three field experiments were designed within the UK-URGENT programme sponsored by NERC. Theexperiments were performed in the City of Birmingham using a finite duration release of inert, non-toxic and non-depositingtracers, vis. perfluoromethylcyclohexane (PMCH) and perfluoromethylcyclopentane (PMCP). Measurements were taken using air bag samplers placedin an arc at 3.5 km (first experiment) and 1 km (second andthird experiments) from the source; some trap samplers wereplaced outside the main arc in the outskirts of the city. Measurements were analysed in the laboratory using anovel gas-chromatography technique. Data so obtained werecompared with predictions from a simple steady-state modeland a time-dependent model. The concentration-time serieswere very asymmetrical with a sharp rise, a plateau followedby a relatively slow decrease and finally a long-livedplateau above (or possibly very slow decrease to) thebackground level.     

Estimation of Cumulative Frequency Distribution for Carbon Monoxide Concentration from Wind-Speed Data, in Buenos Aires (Argentina)

In this article we apply and test a methodology to estimate cumulative frequency distribution for air pollutant concentration from wind-speed data. We use the inverse relationship after Simpson et al. (Atmospheric Environment, 19, 75–82, 1985) between the opposing percentile values in the statistical distributions for air pollutant concentrations and wind-speed data. This relationship is valid, irrespective of the statistical distributions of both variables, if an inverse relationship between them is also applicable. The available data are five years of 8-h average carbon monoxide concentration and 8-h mean wind-speed, observed in Buenos Aires (Argentina). The performance of the obtained empirical expressions in estimating cumulative frequency distributions for 8-h CO is statistically evaluated. The results show that it is possible to obtain an acceptable cumulative frequency distribution for 8-h CO concentration at the site if the cumulative frequency distribution for wind-speed is known. Q–Q plots show a good agreement between estimated and observed values. From our data, the mean relative error of the estimations was found to be as much as 8.0%.     

Potential and Shortcomings of Numerical Weather Prediction Models in Providing Meteorological Data for Urban Air Pollution Forecasting

The last decade progress in numericalweather prediction (NWP) modelling and studies of urbanatmospheric processes for providing meteorological data forurban air pollution forecasting is analysed on examples ofseveral European meteorological centres. Modern nested NWP models are utilising land-use databasesdown to 1 km resolution or finer, and are approaching thenecessary horizontal and vertical resolution suitable forcity scale. The recent scientific developments in the fieldof urban atmospheric physics and the growing availabilityof high-resolution urban surface characteristics datapromise further improvements of the capability of NWPmodels for this aim. A strategy to improve NWP data forthe urban air pollution forecasting is suggested.     

CFD Prediction of Air Quality in the Area between Two City Vehicular Tunnels Considering Moving Cars

Concentration fields of different pollutants that spread outside two roadtunnels predicted with a CFD code will be presented. The solution domain represents the city area located between two tunnel outlets – tunnel Strahov and tunnel Mrazovka in Prague. The vicinity of both tunnels is a heavily built up area with tall buildings forming typical street canyons. The CFD modelling predicts the situation after the tunnel Mrazovka will be finished and traffic will increase considerably between both tunnels. Namely, an interest was given to the prediction of dispersion of emissions leaving both tunnel and the area touched by the traffic. For the CFD predictions, a method previously developed for moving vehicles was used. The method uses combination of Eulerian and Lagrangian approaches to moving objects and is capable of modeling different speeds and traffic rates of cars as well as traffic-induced turbulence. Influence of several meteorological parameters was studied, namely wind speed and direction and traffic parameters, like traffic rates and speed of cars. The method separates contributions from different sources to the total concentration field, namely from background, tunnel outlet and roadway. Results are presented in the form of horizontal and vertical concentration fields of NO_x.     

城市旅游环境承载力及其旅游资源空间管理

UTECC主要充当控制旅游需求的功能。UTECC的降低最明显的后果就是损害了城市的生态环境质量,紧接着会导致旅游需求的降低。为了实现城市旅游可持续发展,城市的旅游需求不能超过旅游环境承载力。通常对城市旅游资源过度需求的空间管理方法主要有5种。本文在AlanCollins(1999年)研究的基础上提出了城市旅游环境承载力的概念,并借助城市旅游资源过度需求管理方面的理论对如何使用及防止滥用城市旅游环境承载力作了初步研究。     

江苏省城市防汛决策支持系统研究

在分析江苏省城市防汛问题的基础上，设计了其防汛决策支持系统；根据江苏省城市洪涝灾情特点研建和选用了适宜的数学模型，该模型可以迅速、可靠和正确地模拟城市雨情、水情、灾情的发展过程和可能后果，为城市防汛决策提供多层次的信息服务和多种支持手段。     

天津市城区暴雨沥涝仿真模拟系统的研究

天津市位于黄河水系尾闾，是我国北方重要的工业和港口城市。该市历史上一直遭受洪涝灾害的威胁，加之近几年市区范围不断扩大，不透水面积增加，排水能力远远不能适应城市的发展要求，城市沥涝问题日趋严重。为了掌握天津市暴雨沥涝的规律，减轻洪涝灾害对该市的影响，作者利用二维不恒定流水动力学模型和计算机信息管理及图形技术，采用Power Station Fortran 4.0和Visual Basic5.0编程语言，在Widows98环境下开发了天津市暴雨沥涝仿真模拟系统。该系统首次实现了从城市暴雨预报、监测到城市暴雨沥涝仿真模拟的研究， 不仅能够处理实时的不均匀的降雨信息，还能处理数值预报模型的预报降雨信息。系统的信息前后处理模块用图形方式管理仿真模型的各类信息，方便用户显示、查询和修改，使系统更加完整、实用。     

CONSTRUCTING A PROBLEM SOLVING ENVIRONMENT TOOL FOR HYDROLOGIC ASSESSMENT OF LAND USE CHANGE1

ABSTRACT: This paper describes the integration of a comprehensive hydrological model known as the Hydrological Simulation Program Fortran (HSPF) into a problem solving environment (PSE) for watershed management. The original PSE concept was a structure providing web‐based access to a suite of models, including HSPF and other models of in‐stream hydrodynamics, biological impacts and economic effects, for the watershed‐wide assessment of alternative land use scenarios. The present paper describes only the HSPF integration into the PSE program. Example applications to the 148 square kilometer (57 square mile) Back Creek subwatershed in the upper Roanoke River system (1,479 square kilometers or 571 square miles) in southwest Virginia are used to illustrate important concepts and linkages between land development and hydrological change using hypothetical' what if'scenarios. The features of HSPF and its limitations in this context are discussed. The paper as such is a proof‐of‐concept paper and not a completion report. It is intended to describe the PSE tool building process rather than analysis of the many possible simulation outcomes. However, the dominance of raw imperviousness as a contributor to hydrograph response is apparent in all the PSE simulations described in this paper.     

HEAVY RAINSTORMS IN CHICAGO: INCREASING FREQUENCY,ALTERED IMPACTS,AND FUTURE IMPLICATIONS1

ABSTRACT: Operations of a dense raingage network in the Chicago area since 1989 provided data to assess the temporal and spatial distributions of heavy rainstorms. The 12‐year average was 4.4 storms per year, 40 percent more than in the 1948 to 1980 period, reflecting an ongoing Midwestern increase in heavy rains. The total rainfall from the 53 heavy rainstorms maximized over the city, reflecting previous observations that the influence of the city and Lake Michigan on the atmosphere causes an increase in heavy rains. Impacts from the record high number of eight storms in 2001 revealed that efforts to control flooding including the Deep Tunnel system, had reduced street and basement flooding in the moderate intensity storms, but the two most intense storms, each with 100‐year rainfall values, led to excessive flooding and a need to release flood waters into Lake Michigan. Results suggest continuing increases in the number of heavy rainstorms in future years, which has major implications for water managers in Chicago and elsewhere.