城市热岛效应下浅层土中混凝土的酸腐蚀试验研究

针对城市热岛效应引起城区浅层土地温场升高这一观测结果,采用室内快速模拟试验方法,对城区酸性土壤腐蚀混凝土材料的温度效应开展了试验研究.试验研究了在温度为5℃、20℃和40℃条件下,混凝土试样在酸浓度分别为0%、5%和10%的沙土介质中放置30 d、90 d后的抗压强度变化规律,并对混凝土试样在腐蚀过程中的腐蚀系数变化规...     

服务于城市旅游形象的景观规划--以南京市为例

分析了城市旅游形象与城市景观之间的关系,即城市旅游形象的塑造离不开城市景观的规划建设,城市景观的优化有助于提高城市旅游形象;提出服务于城市旅游形象的景观规划理念和原则。规划理念为体现城市旅游形象,显现城市三脉,提供城市旅游活动空间,创造城市旅游生态环境;规划原则以理念形象为核心,人地协调性、主题性与市场性相结合,特色性与风格统一性相结合。并对服务于城市旅游形象的景观规划结构要素和组成要素进行了研究,结构要素分为城市景观整体结构、特色城市景观带（区）和城市景观视觉识别系统;组成要素可分为硬质景观要素和软质景观要素。最后以南京市为例进行案例研究。     

壳体缓释技术对带壳装药慢速烤燃反应烈度的缓解作用研究

为了研究2种典型壳体缓释技术对弹药慢速烤燃响应烈度的缓解作用,基于试验条件分别建立无缓释设计、侧壁加工应力槽和端盖加工泄压孔的带壳PBX装药慢速烤燃仿真模型,提出使用热分解反应动力学模型和燃烧反应模型模拟计算不同约束条件下带壳PBX装药从开始加热发生热分解反应到点火燃烧以及炸药与壳体耦合作用的烤燃过程的计算方法。研究结果表明：通过侧壁加工应力槽以及端盖加工泄压孔的缓释结构设计,可以有效地降低壳体破裂时炸药内部的压力及反应度,以达到缓解反应烈度的目的。     

Mainstreaming risk reduction in urban planning and housing: a challenge for international aid organisations

The effects of 'natural' disasters in cities can be worse than in other environments, with poor and marginalised urban communities in the developing world being most at risk. To avoid post-disaster destruction and the forced eviction of these communities, proactive and preventive urban planning, including housing, is required. This paper examines current perceptions and practices within international aid organisations regarding the existing and potential roles of urban planning as a tool for reducing disaster risk. It reveals that urban planning confronts many of the generic challenges to mainstreaming risk reduction in development planning. However, it faces additional barriers. The main reasons for the identified lack of integration of urban planning and risk reduction are, first, the marginal position of both fields within international aid organisations, and second, an incompatibility between the respective professional disciplines. To achieve better integration, a conceptual shift from conventional to non-traditional urban planning is proposed. This paper suggests related operative measures and initiatives to achieve this change.     

动态规划法在污水处理厂优化设计中的应用

对具有代表性的系统优化模型进行分析比较,选用动态规划法对城市污水处理厂进行优化设计,得到了城市污水处理厂投资和运行的最优决策,为城市污水处理厂运行和设计提供了依据.     

分离岛式地铁站可用安全疏散时间计算与比较分析*

为研究大客流地铁车站风险因素,提出车站疏散能力分析的基本要素,结合某分离岛式地下车站,采用规范计算及精细网格模型对可用安全疏散时间进行计算与比较分析。结果表明:楼扶梯的通过效率、车站结构形式、疏散人员的数量及分布情况等因素对仿真模拟的结果产生影响;《地铁安全疏散规范》（GB/T 33668—2017）综合考虑了疏散至楼扶梯入口时间、楼扶梯上平均滞留时间及通道非均匀性偏差时间等,与仿真模拟结果的吻合度较高。研究结果可为国内类似车站的安全疏散设计及运营疏散组织提供参考。     

Effect of pipes in heat pump system on electric vehicle energy saving

ABSTRACT

Refrigerant pressure drop and temperature change in pipes are normally ignored in the thermodynamic analysis of traditional vehicle air conditioning system, this will result in serious errors. In this Paper, pressure drop and temperature difference are simulated in different pipes of electric vehicle (EV) heat pump system to analysis the effects of pipes in the actual EV heat pump system. The results indicate that the greater the mass flow, the faster pressure drop increases, the temperature difference decreases. Pressure drop of saturated liquid refrigerant is smaller than that of saturated gas refrigerant at the same saturation pressure and mass flow rate. The higher the refrigerant pressure (no phase change), the slower pressure drop decreases, the faster the temperature difference decreases. Pressure drop decreases with the increment of bending angle of the pipe. For EV heat pump system, suitable valves and less branches are helpful for energy saving of the system. Shortening the pipe between compressor and condenser can reduce temperature change obviously. Pressure drop per unit length in the pipe between evaporator and compressor is large especially in heating mode because of lower refrigerant density. It even reaches to over 100 times of that in the pipe between condenser and throttle valve in heating mode and has negative effects on the performance of the system. If the evaporator is closer to the compressor and the number of branches is less, then pressure drop will decrease a lot, which will be advantageous for energy saving of the heat pump system.     

Characteristics of stable biodiesel emulsion fuel with the aid of lipophilic surfactant,polyglycerol polyricinoleate (PGPR)

ABSTRACT

Biodiesel emulsion fuel is reported as one of the most feasible options capable of generating lower NOx emission than that from fossil fuels. However, oil and water in the emulsion fuel are easily separated and unstable. The aim of the present study is to consider the production and stability of biodiesel emulsion fuel by using tetraglycerin ester (CR-310), i.e., one of lipophilic surfactant, polyglycerol polyricinoleate (PGPR) and biodiesel, i.e., Waste cooking Oil Methyl Ester (WOME) produced based on waste cooking oil. The corresponding heat rate, water content, and viscosity are measured. Emphasis is placed on the effects of water content and surfactant on biodiesel emulsions. It is found that: (i) stable emulsion fuel is obtained by adding at least 2.0% of CR-310 and is maintained over 1 month, (ii) there is no effect of water content on stable emulsion fuel if CR-310 is used over 2.0%, and (iii) the viscosity of emulsion fuels is higher than that of the biodiesel fuel and is gradually increased with an increase in the water content.     

Explosion suppression of porous materials in a pipe-connected spherical vessel

To study the suppression of different porous materials on the explosion of combustible gas, some experiments were implemented. The porous materials were categorized into three kinds, including six subcategories, and the explosion suppression characteristics of the thin iron hoop, one-layer porous materials, two-layer composite porous materials, and three-layer composite porous materials were studied and analyzed. The results show that a rarefaction wave appears in the spherical vessel during the rapid development stage of combustion explosion. Further, the thin iron hoop could enhance the gas explosion intensity. And the explosion intensity suppression effect of the porous materials is obvious, the best effects of one-layer, two-layer and three-layer porous materials are from Fe–Ni 10 mm/40 PPI, Fe–Ni 10 mm/90 PPI + Al₂O₃ 10 mm/30 PPI, and Al₂O₃ 10 mm/50 PPI + Fe–Ni 10 mm/40 PPI + SiC 20 mm/20 PPI, respectively. According to the surface morphology of the porous materials, the anti-sintering ability of the three categories of porous materials follows the order of Al₂O₃ > SiC > Fe–Ni. Besides, the thickness and pore size of the combined porous material was changed, which has a great influence on the explosion pressure and the explosion intensity.     

大型碳化硅生产园区面源源强及减排指标核算

以某年产25万吨大型碳化硅园区无组织排放面源为例,提出基于多个地面站气象数据的CALPUFF模型地面浓度反推方法,优化流场模拟,使得无组织面源源强核算结果更加准确,并以环境保护目标空气质量达标为原则,核算其大气污染物减排指标,得出具体结论:园区大气污染物SO2、NOX、CO、PM10年排放量分别为449.06t、86.98t、5158.58t、115.06t;无组织排放SO2、CO及PM10的减排比例分别为63.5%、19.2%、42.44%,对应减排量分别为285.16 t/a、990.45 t/a、48.83 t/a。