响应面法优化胡敏素对Cu2+的吸附及机理研究

采用Box-Behnken响应面优化实验设计对胡敏素吸附去除水中Cu~(2+)的过程进行了优化,设定吸附时间、吸附剂用量、pH、温度和Cu~(2+)初始浓度为5个影响因素,Cu~(2+)吸附率为响应值,建立了吸附率与上述因素之间的二次多项式模型,确定最佳吸附条件,对吸附过程的等温模型及吸附机理进行了研究.响应面分析表明,吸附剂用量、pH和Cu~(2+)初始浓度是显著因素.胡敏素对Cu~(2+)吸附的最佳条件为:吸附时间110 min、吸附剂用量2.4 g·L~(-1)、pH=5.4、温度25.0℃、Cu~(2+)初始浓度208 mg·L~(-1).在该条件下,测得胡敏素对Cu~(2+)的吸附率可达到80.78%,吸附符合Langmuir等温线方程.胡敏素表面疏松多孔,有利于其通过物理吸附方式吸附Cu~(2+),同时,胡敏素表面的羟基、羧基和羰基等活性基团可以与Cu~(2+)发生配位络合作用,Na+、Ca~(2+)、Mg~(2+)等与Cu~(2+)发生离子交换作用,从而发生化学吸附.研究结果表明,胡敏素作为一种绿色、高效、廉价的吸附剂,可应用于Cu~(2+)污染废水的治理.     

Myrothecium verrucaria NF-08产漆酶条件的响应面法优化及粗酶染料脱色研究

以半知菌属疣孢漆斑菌Myrothecium verrucaria NF-08为供试菌,采用响应面方法优化菌株产漆酶条件,并以其漆酶粗酶进行3种结构类型6种染料的脱色试验,考察了粗酶浓度、温度和p H值对脱色率的影响.两水平析因设计、中心组合设计和验证试验结果表明:葡萄糖浓度为15.4 g·L~(-1)、蛋白胨浓度为43.3 g·L~(-1)和培养基初始p H值为6.68时,漆酶活性达到最大值(25.58±1.60)U·m L~(-1),是单因素试验(16.82 U·m L~(-1))的1.52倍,提高了52.1%.以上述发酵条件获得的M.verrucaria NF-08漆酶粗酶对3种结构类型染料均有脱色效果,排序为偶氮类优于芳甲烷类优于蒽醌类.脱色率随粗酶浓度增大(2~8 U·m L~(-1))、反应温度升高(15~35℃)而上升,随p H值上升(4~10)而下降.粗酶浓度为5 U·m L~(-1),反应温度为25℃,p H值为4时,偶氮类染料铬黑T和芳甲烷类染料碱性品红即可几乎完全脱色,脱色率分别为99.2%和94.6%.     

城市热岛效应下浅层土中混凝土的酸腐蚀试验研究

针对城市热岛效应引起城区浅层土地温场升高这一观测结果,采用室内快速模拟试验方法,对城区酸性土壤腐蚀混凝土材料的温度效应开展了试验研究.试验研究了在温度为5℃、20℃和40℃条件下,混凝土试样在酸浓度分别为0%、5%和10%的沙土介质中放置30 d、90 d后的抗压强度变化规律,并对混凝土试样在腐蚀过程中的腐蚀系数变化规...     

轨道交通运行引起的场地振动试验研究

轨道交通运行引起的环境振动问题,已成为土木工程界关注的一个新的课题。对南京市栖霞镇某场地进行了列车振动现场试验,得到了不同列车车型与车速下的地面振动速度时程曲线,给出了地面振动速度的频谱特性和衰减规律,分析了列车运行引起的环境振动的传递路径,为进一步研究轨道交通振动控制提供了参考。     

澳门特别行政区土壤自然消减能力与污染背景

澳门是我国人口密度最大的城市.选择澳门特别行政区不同功能区绿地土壤为研究对象,首先,通过野外布点采样,调查分析了表层土壤中9种重金属元素(Cr、Ni、Cu、Cd、Pb、Cr、Zn、As、Hg)和16种优先控制多环芳烃(PAHs)的分布特征;其次,利用累积频率分布曲线法估算了土壤重金属和PAHs的土壤污染背景;最后,基于...     

昌吉硫磺沟矿区地表沉陷区的土地整治与生态恢复

针对昌吉市硫磺沟矿区煤矿开采引起的地表沉陷及其对矿区地表及环境破坏的影响,以减轻地表沉陷危害程度、恢复矿区所在地的生态功能为目标,按照采矿区塌陷类型、塌陷坑大小及塌陷区地理环境,采用不同的土地整治与生态恢复措施,在防治和控制矿区地表沉陷引起的生态破坏及生态环境保护方面取得很好的成果与经验.     

锚喷粉尘受力及产尘机理分析

通过对锚喷粉尘的受力分析,基于粉尘颗粒的基本性质,运用牛顿运动规律、流体力学的紊流射流、两相流等相关理论,对锚喷产尘原因及运动规律研究,认为锚喷尘源产生的4种方式: 粉尘颗粒自身的特性及二次风流的影响,高速喷射气流带动周围的空气运动所产生的剪切作用,锚喷高速射流内部中团粒间的相互作用以及物料与受喷面的碰撞是影响锚喷产生粉尘的主要原因.     

Coupled infrared extinction spectra and size distribution measurements for several non-clay components of mineral dust aerosol (quartz, calcite, and dolomite)

Simultaneous size distributions and Fourier transform infrared (FTIR) extinction spectra have been measured for several representative components of mineral dust aerosol (quartz, calcite, and dolomite) in the fine particle size mode (D=0.1–1 μm). Optical constants drawn from the published literature have been used in combination with the experimentally determined size distributions to simulate the extinction spectra. In general, Mie theory does not accurately reproduce the peak position or band shape for the prominent IR resonance features in the 800–1600 cm⁻¹ spectral range. The resonance peaks in the Mie simulation are consistently blue shifted relative to the experimental spectra by 20–50 cm⁻¹. Spectral simulations, derived from a simple Rayleigh-based analytic theory for a “continuous distribution of ellipsoids” particle shape model, better reproduce the experimental spectra, despite the fact that the Rayleigh approximation is not strictly satisfied in these experiments. These results differ from our previous studies of particle shape effects in silicate clay mineral dust aerosols where a disk-shaped model for the particles was found to be more appropriate.     

Implementation of a windblown dust parameterization into MODELS-3/CMAQ: Application to episodic PM events in the US/Mexico border

Windblown dust is known to impede visibility, deteriorate air quality and modify the radiation budget. Arid and semiarid areas with unpaved and unvegetated land cover are particularly prone to windblown dust, which is often attributed to high particulate matter (PM) pollution in such areas. Yet, windblown dust is poorly represented in existing regulatory air quality models. In a study by the authors on modeling episodic high PM events along the US/Mexico border using the state-of-the-art CMAQ/MM5/SMOKE air quality modeling system [Choi, Y.-J., Hyde, P., Fernando, H.J.S., 2006. Modeling of episodic particulate matter events using a 3D air quality model with fine grid: applications to a pair of cities in the US/Mexico border. Atmospheric Environment 40, 5181–5201], some of the observed PM₁₀ NAAQS exceedances were inferred as due to windblown dust, but the modeling system was incapable of dealing with time-dependent episodic dust entrainment during high wind periods. In this paper, a time-dependent entrainment parameterization for windblown dust is implemented in the CMAQ/MM5/SMOKE modeling system with the hope of improving PM predictions. An approach for realizing windblown dust emission flux for each grid cell over the study domain on an hourly basis, which accounts for the influence of factors such as soil moisture content, atmospheric stability and wind speed, is presented in detail. Comparison of model predictions with observational data taken at a pair of US/Mexico border towns shows a clear improvement of model performance upon implementation of the dust emission flux parameterization.     

基于现代信息技术的城市灾害应急管理系统

城市灾害应急管理系统是一项复杂的大系统工程。本文着重从应急管理过程中的应急资源调配、应急预案制定等方面阐述了现代信息技术在城市灾害应急管理中的应用与优势。认为应急管理信息系统的建立目的不是为了预测和估算,而应是当灾害发生时,对已造成的灾情局面做出快速的辅助决策支持。基于此,利用SuperMapObject5.0,Visual Basic6.0,SQL Server2000等现代信息技术软件,以辅助决策、资源快速查询以及生命线管网易损处调查为目的,本文建立了一个局部地区灾害应急管理信息系统。系统的数据库建立更突出了为应急管理服务所需的基础信息、空间数据、应急预案和应急资源等信息划分方式;结合已有的震害预测理论和方法,开发了供水系统和交通系统的震害预测模块,事先为灾害应急决策提供可能的震害信息。系统的开发过程进一步证明了GIS在城市灾害应急管理中有着直观显示、容易操作、辅助准确决策等优势。