COMPARISON OF PROCESS‐BASED AND ARTIFICIAL NEURAL NETWORK APPROACHES FOR STREAMFLOW MODELING IN AN AGRICULTURAL WATERSHED1

ABSTRACT: The performance of the Soil and Water Assessment Tool (SWAT) and artificial neural network (ANN) models in simulating hydrologic response was assessed in an agricultural watershed in southeastern Pennsylvania. All of the performance evaluation measures including Nash‐Sutcliffe coefficient of efficiency (E) and coefficient of determination (R²) suggest that the ANN monthly predictions were closer to the observed flows than the monthly predictions from the SWAT model. More specifically, monthly streamflow E and R² were 0.54 and 0.57, respectively, for the SWAT model calibration period, and 0.71 and 0.75, respectively, for the ANN model training period. For the validation period, these values were ?0.17 and 0.34 for the SWAT and 0.43 and 0.45 for the ANN model. SWAT model performance was affected by snowmelt events during winter months and by the model's inability to adequately simulate base flows. Even though this and other studies using ANN models suggest that these models provide a viable alternative approach for hydrologic and water quality modeling, ANN models in their current form are not spatially distributed watershed modeling systems. However, considering the promising performance of the simple ANN model, this study suggests that the ANN approach warrants further development to explicitly address the spatial distribution of hydrologic/water quality processes within watersheds.     

ASSESSMENT OF POSSIBLE IMPACTS OF CLIMATE CHANGE IN AN URBAN CATCHMENT1

ABSTRACT: Stationarity of rainfall statistical parameters is a fundamental assumption in hydraulic infrastructure design that may not be valid in an era of changing climate. This study develops a framework for examining the potential impacts of future increases in short duration rainfall intensity on urban infrastructure and natural ecosystems of small watersheds and demonstrates this approach for the Mission/Wagg Creek watershed in British Columbia, Canada. Nonstationarities in rainfall records are first analyzed with linear regression analysis, and the detected trends are extrapolated to build potential future rainfall scenarios. The Storm Water Management Model (SWMM) is used to analyze the effects of increased rainfall intensity on design peak flows and to assess future drainage infrastructure capacity according to the derived scenarios. While the framework provided herein may be modified for cases in which more complex distributions for rainfall intensity are needed and more sophisticated stormwater management models are available, linear regressions and SWMM are commonly used in practice and are applicable for the Mission/Wagg Creek watershed. Potential future impacts on stream health are assessed using methods based on equivalent total impervious area. In terms of impacts on the drainage infrastructure, the results of this study indicate that increases in short duration rainfall intensity may be expected in the future but that they would not create severe impacts in the Mission/Wagg Creek system. The equivalent levels of imperviousness, however, suggest that the impacts on stream health could be far more damaging.     

AN INTEGRATED ONE‐DIMENSIONAL AND TWO‐DIMENSIONAL URBAN STORMWATER FLOOD SIMULATION MODEL1

ABSTRACT: Flash flooding is the rapid flooding of low lying areas caused by the stormwater of intense rainfall associated with thunderstorms. Flash flooding occurs in many urban areas with relatively flat terrain and can result in severe property damage as well as the loss of lives. In this paper, an integrated one‐dimensional (1‐D) and two‐dimensional (2‐D) hydraulic simulation model has been established to simulate stormwater flooding processes in urban areas. With rainfall input, the model simulates 2‐D overland flow and 1‐D flow in underground stormwater pipes and drainage channels. Drainage channels are treated as special flow paths and arranged along one or more sides of a 2‐D computational grid. By using irregular computation grids, the model simulates unsteady flooding and drying processes over urban areas with complex drainage systems. The model results can provide spatial flood risk information (e.g., water depth, inundation time and flow velocity during flooding). The model was applied to the City of Beaumont, Texas, and validated with the recorded rainfall and runoff data from Tropical Storm Allison with good agreement.     

EMPIRICAL MODELING OF HYDROLOGIC AND NFS POLLUTANT FLUX IN AN URBANIZING BASIN1

ABSTRACT: Long term effects of precipitation and land use/land cover on basin outflow and nonpoint source (NFS) pollutant flux are presented for up to 24 years for a rapidly developing headwater basin and three adjacent headwater basins on the urban fringe of Washington, D.C. Regression models are developed to describe the annual and seasonal responses of basin outflow and IMPS pollutant flux to precipitation, mean impervious surface (IS), and land use. To quantify annual change in mean IS, a variable called delta IS is created as a temporal indicator of urban soil disturbance. Hydrologic models indicate that total annual surface outflow is significantly associated with precipitation and mean IS (r²= 0.65). Seasonal hydrologic models reveal that basin outflow is positively associated with IS during the summer and fall growing season (June to November). NPS pollutant flux models indicate that total and storm total suspended solids (TSS) flux are significantly associated with precipitation and urban soil disturbance in all seasons. Annual NPS total nitrogen flux is significantly associated with both urban and agricultural soil disturbance (r²= 0.51). Seasonal models of phosphorus flux indicate a significant association of total phosphorus flux with urban soil disturbance during the growing season. Total soluble phosphorus (TSP) flux is significantly associated with IS (r²= 0.34) and urban and agricultural soil disturbance (r²= 0.58). In urbanizing Cub Run basin, annual TSP concentrations are significantly associated with IS and cultivated agriculture (r²= 0.51).     

Results from Three Field Tracer Experiments on the Neighbourhood Scale in the City of Birmingham UK

The physical processes governing flow and pollutantdispersion at the neighbourhood scale, a spatial scaleintermediate between the street scale and the city scale, is notwell understood. Furthermore, it is not clear whether a traditional approach using averaged characteristics such as theaerodynamic roughness length is sufficient to predict the concentration field at this scale. To investigate pollutant dispersion in a real urban area, three field experiments were designed within the UK-URGENT programme sponsored by NERC. Theexperiments were performed in the City of Birmingham using a finite duration release of inert, non-toxic and non-depositingtracers, vis. perfluoromethylcyclohexane (PMCH) and perfluoromethylcyclopentane (PMCP). Measurements were taken using air bag samplers placedin an arc at 3.5 km (first experiment) and 1 km (second andthird experiments) from the source; some trap samplers wereplaced outside the main arc in the outskirts of the city. Measurements were analysed in the laboratory using anovel gas-chromatography technique. Data so obtained werecompared with predictions from a simple steady-state modeland a time-dependent model. The concentration-time serieswere very asymmetrical with a sharp rise, a plateau followedby a relatively slow decrease and finally a long-livedplateau above (or possibly very slow decrease to) thebackground level.     

Estimation of Cumulative Frequency Distribution for Carbon Monoxide Concentration from Wind-Speed Data, in Buenos Aires (Argentina)

In this article we apply and test a methodology to estimate cumulative frequency distribution for air pollutant concentration from wind-speed data. We use the inverse relationship after Simpson et al. (Atmospheric Environment, 19, 75–82, 1985) between the opposing percentile values in the statistical distributions for air pollutant concentrations and wind-speed data. This relationship is valid, irrespective of the statistical distributions of both variables, if an inverse relationship between them is also applicable. The available data are five years of 8-h average carbon monoxide concentration and 8-h mean wind-speed, observed in Buenos Aires (Argentina). The performance of the obtained empirical expressions in estimating cumulative frequency distributions for 8-h CO is statistically evaluated. The results show that it is possible to obtain an acceptable cumulative frequency distribution for 8-h CO concentration at the site if the cumulative frequency distribution for wind-speed is known. Q–Q plots show a good agreement between estimated and observed values. From our data, the mean relative error of the estimations was found to be as much as 8.0%.     

Satellite and Ground Based Monitoring of Aerosol Plumes

Plumes of atmospheric aerosol have been studied using a rangeof satellite and ground-based techniques. The Sea-viewing WideField-of-view Sensor (SeaWiFS) has been used to observe plumesof sulphate aerosol and Saharan dust around the coast of theUnited Kingdom. Aerosol Optical Thickness (AOT) was retrievedfrom SeaWiFS for two events; a plume of Saharan dusttransported over the United Kingdom from Western Africa and aperiod of elevated sulphate experienced over the Easternregion of the UK. Patterns of AOT are discussed and related tothe synoptic and mesoscale weather conditions. Furtherobservation of the sulphate aerosol event was undertaken usingthe Advanced Very High Resolution Radiometer instrument(AVHRR). Atmospheric back trajectories and weather conditionswere studied in order to identify the meteorologicalconditions which led to this event. Co-located ground-basedmeasurements of PM₁₀ and PM_2.5 were obtained for 4sites within the UK and PM_2.5/10 ratios were calculatedin order to identify any unusually high or low ratios(indicating the dominant size fraction within the plume)during either of these events. Calculated percentiles ofPM_2.5/10 ratios during the 2 events examined show thatthese events were notable within the record, but were in noway unique or unusual in the context of a 3 yr monitoringrecord. Visibility measurements for both episodes have beenexamined and show that visibility degradation occurred duringboth the sulphate aerosol and Saharan dust episodes.     

Potential and Shortcomings of Numerical Weather Prediction Models in Providing Meteorological Data for Urban Air Pollution Forecasting

The last decade progress in numericalweather prediction (NWP) modelling and studies of urbanatmospheric processes for providing meteorological data forurban air pollution forecasting is analysed on examples ofseveral European meteorological centres. Modern nested NWP models are utilising land-use databasesdown to 1 km resolution or finer, and are approaching thenecessary horizontal and vertical resolution suitable forcity scale. The recent scientific developments in the fieldof urban atmospheric physics and the growing availabilityof high-resolution urban surface characteristics datapromise further improvements of the capability of NWPmodels for this aim. A strategy to improve NWP data forthe urban air pollution forecasting is suggested.     

CFD Prediction of Air Quality in the Area between Two City Vehicular Tunnels Considering Moving Cars

Concentration fields of different pollutants that spread outside two roadtunnels predicted with a CFD code will be presented. The solution domain represents the city area located between two tunnel outlets – tunnel Strahov and tunnel Mrazovka in Prague. The vicinity of both tunnels is a heavily built up area with tall buildings forming typical street canyons. The CFD modelling predicts the situation after the tunnel Mrazovka will be finished and traffic will increase considerably between both tunnels. Namely, an interest was given to the prediction of dispersion of emissions leaving both tunnel and the area touched by the traffic. For the CFD predictions, a method previously developed for moving vehicles was used. The method uses combination of Eulerian and Lagrangian approaches to moving objects and is capable of modeling different speeds and traffic rates of cars as well as traffic-induced turbulence. Influence of several meteorological parameters was studied, namely wind speed and direction and traffic parameters, like traffic rates and speed of cars. The method separates contributions from different sources to the total concentration field, namely from background, tunnel outlet and roadway. Results are presented in the form of horizontal and vertical concentration fields of NO_x.     

The Characterisation of Settled Dust by Scanning Electron Microscopy and Energy Dispersive X-ray Analysis

Settled dust has been collected inside the main foyers ofthree University buildings in Wolverhampton City Centre,U.K. Two of the three buildings are located in a streetcanyon used almost exclusively by heavy duty dieselvehicles. The dust was collected on adhesive carbonspectro-tabs to be in a form suitable for analysis byscanning electron microscope and energy dispersive X-rayanalysis. Using these analytical techniques, individualparticle analysis was undertaken for morphology andchemistry. Seasonal variations and variations due tolocation were observed in both the morphologicalmeasurements and chemical analysis. Many of the differencesappear attributable to the influence of road traffic, inparticular, the heavy duty diesel vehicles, travellingalong the street canyon.