Managing disposal of water produced with petroleum in Kuwait

Disposal of water produced with petroleum has been of great interest in Kuwait for the last 20 years. The current problem arose when the Burgan oil field, which is the second largest field in the world, experienced successive increases in the water content of the produced oil. This study introduces a decision-making analysis of the considered alternatives for the disposal of the produced water. Four alternative solutions exist for the industry as practical solutions for the disposal of water produced in Kuwait. The first method utilizes a large number of pits to discharge water. The second alternative depends on discharging water into sealed pits. The third approach to dispose water is by injecting the water underground. The last method is similar to the previous one, but takes into consideration the recovery of reservoir pressure to maintain the rate of oil production. A questionnaire was distributed to 48 experts at the top management level of the petroleum companies and the governmental authority. The data collected considered cost, efficiency, and environmental parameters. Based on the data, a statistical analysis was conducted using the factor analysis method to reduce the number of investigated variables. The analysis concluded that the optimal solution is to use the effluent injection method to discharge water produced with oil in Burgan and similar fields in Kuwait.     

Assessment of Environmental Water Demands (EWD) of Forests for Two Distinct Indian Ecosystems

Sustainable use of water and land resources requires that these scarce resources be appropriately allocated among various competing human activities. Worldwide, there is a realization now that sustainable river basin management should be accorded the highest priority, because it deals not only with technical, but also with ecological and socioeconomic aspects, and thus calls for a multidisciplinary and integrated approach. However, most of the policy and planning documents have either remained silent, or have made only implicit reference to the importance of environmental water demand (EWD) and its quantification. Therefore, in the light of its importance, a methodology has been evolved in this article for quantifying EWD for various forested areas in two distinctly different Indian river basins: Brahmani (humid zone) and Sabarmati (dry zone). The article analyzes and discusses EWD estimates at three different spatial levels: river basins, states, and districts within them, and finally presents a comparative analysis of all these results. Findings of the present study will be immensely useful in understanding various ecological issues connected with water resource projects and proposals in these river basins.     

Applying Integrated Urban Water Management Concepts: A Review of Australian Experience

This article explores recent Australian experiences in the application of the concept of integrated urban water management (IUWM) to land development sites through the review of 15 case studies. It discusses lUWM’s emergence and comments on the success or otherwise of Australian experience in its application. The understanding of IUWM is maturing within the Australian water industry, an occurrence that has been facilitated by demonstration sites such as those reviewed. Successes include the translation of IUWM concepts into well-functioning operational urban developments, significant reductions in the impact of the urban developments on the total water cycle, and the increasing acceptance of the concept within the water and land development industries. However, there is still room for greater integration of the water supply, stormwater, and wastewater components of the urban water cycle, improved dissemination of knowledge, enhancement of skills in both public and private organisations, and monitoring the performance of systems and technologies.     

催化超临界水氧化处理1,5-萘二磺酸

采用Mn2O3/γ-AL2O3和V2O5/γ-Al2O/为催化剂,在一连续流固定床反应器中进行了超临界水氧化1,5-萘二磺酸实验.实验结果表明,在380～440℃,24 MPa条件下,Mn2O3/γ-Al2O3和V2O5/y-Al2O3催化剂对1,5-萘二磺酸的氧化降解具有显著的促进作用,TOC去除率达到90%以上;催化剂的催化效果随反应温度的升高而增强,随pH值的降低而增强,随停留时间的延长先增强后趋于平缓.     

两种改良型活性污泥法在城市污水处理中的比较

介绍了2种改良型活性污泥法———氧化沟工艺和百乐克工艺的特点,并针对2种工艺实际应用中的情况,分析2种工艺在今后发展应用中的趋势。     

UASB处理低浓度城市生活污水的中试试验

研究1·2m3厌氧反应器(UASB),在自然温度(水温32~5℃)下,处理CODCr浓度为200mg/L左右的低浓度生活污水。实验采用颗粒污泥接种二次启动法。水处理系统在水温32~5℃范围内运行6个月的时间,UASB反应器在上升流速为1·4~1·7m/h,水力停留时间(HRT)为3·0~2·5h,CODCr有机污泥负荷(SLR)为0·06~0·13kg/(kg·d)时,去除效率比较稳定,CODCr去除率达40%~80%。     

图象法确定底泥颗粒物的表面分形维数(Ds)

研究了不同标度下底泥颗粒物的表面分形特征.结果表明,底泥颗粒的表面在几个nm到几个μm之间一般都具有多重分形特征,而且在不同的标度范围内表面分形维数(Ds)具有一定的差异,在100-102量级之间,随图象分辨率的增大,相应的Ds一般呈变小的趋势.SEM图象计算出的Ds为2.32-2.42,AFM图象计算出的Ds为2.00-2.46,它们是是纯粹几何意义上的表面粗糙特征的描述.     

赣南小流域的水文地球化学特征和主要风化过程

对赣南花岗岩小流域进行采样、测试及分析,发现其河水含有较低的矿化度,水化学组成以Na ,Ca2 ,Cl-1和HCO-3为主,溶解性Si的含量明显较高,代表了典型硅酸盐地区河流的相应化学组成.通过Gibbs图分析,赣南流域大部分地区受大气降水的影响比较显著,"蒸发-浓缩"类型的小流域也较多.根据主成分分析和因子分析的结果,定量地估算了大气中CO2和三类岩石对河水中各种离子的贡献比例.与黄河相比,赣南流域受硅酸盐岩风化作用强烈,但主要影响因素仍是碳酸盐和蒸发盐岩,二者对赣南流域溶解质的贡献率分别为42.8%和29.2%,大气中CO2对河水溶解质的贡献率为21.4%,低于世界平均水平.主要风化反应以岩盐和方解石的溶解为主,Si/(Na* K)比值较低,说明风化反应在表生环境中进行,其产物是富含阳离子的次生矿物.     

河口近岸水体中颗粒态重金属的潮周期变化

对长江口崇明东滩近岸水体中颗粒态重金属的潮周期变化特征及其影响机制进行了研究.结果表明,受粒度影响,底层水体中颗粒态Cu、Pb、Fe、Mn、Zn、Cr、Al的总量分别高出表层沉积物的184%、99%、56%、62%、147%、50%和45%,其中Cu、Pb、Fe、Mn、Zn、Al可还原态部分在底层水体悬浮颗粒物中的含量也明显高出表层沉积物的2～3倍,但与重金属总量相比,上述元素的可还原态部分所占比例与表层沉积物相差不大.在5次潮汐循环过程中,颗粒态重金属均在涨潮初期、高平潮前后及落潮末期出现较高含量.这种变化主要与水动力条件有关,当水体流速增大时,从底部沉积物再悬浮起来的颗粒态重金属对水体中的永久性悬浮颗粒起了很大的稀释效应.水体中的盐度、DO及pH等环境因子对潮周期内颗粒态重金属的变化影响不大.     

某市给水管网中铁释放现象影响因素与控制对策分析

针对某市管网水中铁浓度的变化规律进行了系统的研究,确定了管垢向管网水中释放出的铁是管网水中铁超标的主要原因.研究中发现铸铁管和镀锌钢管中管垢的主要化学组分为铁.在给水管网中,管网水的溶解氧和余氯浓度低时,对应的管网水中铁释放现象严重,其原因是还原条件使管垢表面的致密钝化层被破坏,造成二价铁的大量释放.根据试验结果提出了给水管网中铁释放和“红水”现象的控制对策.