城市道路机动车尾气污染物扩散模型研究概况

介绍了国外几个主要城市道路机动车尾气污染物扩散模型,以及模型的分类、特点和发展过程。同时,简要介绍了国内学者利用主要扩散模型对于城市道路机动车污染物的研究。     

日本交通部门碳排放与低碳交通相关因素研究

本文就日本向低碳社会体系转型的过程中,交通部门碳排放现状、都市交通体系构成、实施对策等方面进行了分析,探讨其交通运输领域低碳交通的相关因素及发展模式,为中国低碳交通体系的构建提供参考。     

热闷钢渣用单轨移动罩车的设计

根据钢渣热闷工艺要求进行单轨移动罩车的结构设计与行走装置的设计,通过三维建模软件及理论力学分析计算此罩车的配重及质心,使罩车与导向装置接触处的压力最小,且罩车施加给低地轨的横向静摩擦力最小。通过此方法设计的单轨移动罩车能大大改善钢渣热闷厂房的工作环境,减少厂房的腐蚀,提高厂房屋顶的寿命周期。     

基于实时交通信息的道路机动车动态排放清单模拟研究

以上海市为例开展了实际道路车流分布、行驶工况和车辆技术的实地调查,建立了道路车流、VSP分布和车辆技术数据库.在此基础上,基于实时的车流、车速等交通信息,构建了动态化的道路机动车污染物排放清单模拟方法,并开展了城区典型道路的机动车小时排放模拟案例研究.调查结果表明,上海市城区道路车流以轻型客车和出租车为主,分别占各时段车流总量的48%～72%和15%～43%;VSP分布与平均车速存在较好的规律,各车型VSP峰值随平均车速的上升向高负荷去移动,且峰值逐渐降低;当前上海市车辆以国2和国3车型为主,经过年检站调查结果的校正,国2和国3车型分别占各车型的11%～70%和17%～51%.模拟案例结果显示,道路机动车CO、VOC、NOx和PM日排放峰谷比可达3.7、4.6、9.6和19.8左右,CO和VOC排放主要来自轻型客车和出租车,与车流变化的相关性较好,而NOx和PM排放主要来自重型客车和公交车,且主要集中在早晚高峰时段.采用建立的动态排放模拟方法可实时反映实际道路的机动车排放变化,获取高排放路段和时段,为交通环境管理提供重要的技术手段和决策依据.     

Features of fatal injuries in older cyclists in vehicle–bicycle accidents in Japan

Objective: The purpose of this study was to identify and better understand the features of fatal injuries in cyclists aged 75 years and over involved in collisions with either hood- or van-type vehicles.

Methods: This study investigated the fatal injuries of cyclists aged 75 years old and over by analyzing accident data. We focused on the body regions to which the fatal injury occurred using vehicle–bicycle accident data from the Institute for Traffic Accident Research and Data Analysis (ITARDA) in Japan. Using data from 2009 to 2013, we examined the frequency of fatally injured body region by gender, age, and actual vehicle travel speed. We investigated any significant differences in distributions of fatal injuries by body region for cyclists aged 75 years and over using chi-square tests to compare with cyclists in other age groups. We also investigated the cause of fatal head injuries, such as impact with a road surface or vehicle.

Results: The results indicated that head injuries were the most common cause of fatalities among the study group. At low vehicle travel speeds for both hood- and van-type vehicles, fatalities were most likely to be the result of head impacts against the road surface.

The percentage of fatalities following hip injuries was significantly higher for cyclists aged 75 years and over than for those aged 65–74 or 13–59 in impacts with hood-type vehicles. It was also higher for women than men in the over-75 age group in impacts with these vehicles.

Conclusions: For cyclists aged 75 years and over, wearing a helmet may be helpful to prevent head injuries in vehicle-to-cyclist accidents. It may also be helpful to introduce some safety measures to prevent hip injuries, given the higher level of fatalities following hip injury among all cyclists aged 75 and over, particularly women.     

Effects of vehicle power on passenger vehicle speeds

Objectives: During the past 2 decades, there have been large increases in mean horsepower and the mean horsepower-to–vehicle weight ratio for all types of new passenger vehicles in the United States. This study examined the relationship between travel speeds and vehicle power, defined as horsepower per 100 pounds of vehicle weight.

Methods: Speed cameras measured travel speeds and photographed license plates and drivers of passenger vehicles traveling on roadways in Northern Virginia during daytime off-peak hours in spring 2013. The driver licensing agencies in the District of Columbia, Maryland, and Virginia provided vehicle information numbers (VINs) by matching license plate numbers with vehicle registration records and provided the age, gender, and ZIP code of the registered owner(s). VINs were decoded to obtain the curb weight and horsepower of vehicles. The study focused on 26,659 observed vehicles for which information on horsepower was available and the observed age and gender of drivers matched vehicle registration records. Log-linear regression estimated the effects of vehicle power on mean travel speeds, and logistic regression estimated the effects of vehicle power on the likelihood of a vehicle traveling over the speed limit and more than 10 mph over the limit.

Results: After controlling for driver characteristics, speed limit, vehicle type, and traffic volume, a 1-unit increase in vehicle power was associated with a 0.7% increase in mean speed, a 2.7% increase in the likelihood of a vehicle exceeding the speed limit by any amount, and an 11.6% increase in the likelihood of a vehicle exceeding the limit by 10 mph. All of these increases were highly significant.

Conclusions: Speeding persists as a major factor in crashes in the United States. There are indications that travel speeds have increased in recent years. The current findings suggest the trend toward substantially more powerful vehicles may be contributing to higher speeds. Given the strong association between travel speed and crash risk and crash severity, this is cause for concern.     

基于加速度干扰和AHP的车辆行驶安全性评价模型

关于行驶中的车辆在交通系统各因素作用下的行驶安全性评价,在现有交通系统四大要素的基础上加入车辆行驶状态,构成"人-车-环境-路-车辆行驶状态"5要素。并对各要素评价指标的选定做了细致的筛选,建立了车辆行驶安全性评价指标体系。其中"人-车-环境-路"因素采用打分的形式确定其参数的分值,并利用层次分析法(AHP)计算各参数权重来构建模型的;"车辆行驶状态"因素则是引入加速度干扰的定义,建立基于道路结构的加速度干扰模型。最后,运用层级分析法建立了总的车辆行驶安全评价模型。     

跨座式单轨交通人身安全雷电防护分析

针对跨座式单轨交通列车遭受雷击时列车内的人员安全性,本文通过对列车内人员不接触与列车金属外壳直接连接的金属构件和接触与列车金属外壳直接连接的金属构件两种情况进行计算分析,得出第一种情况下,人员是完全安全的;第二种情况下,人员可能会有像蜜蜂刺痛或烟头灼痛的感觉,但不威胁生命安全。     

汽车内二氧化碳污染与通风模式

不同车速下,对四种通风模式(A关闭通风口和风扇、B关闭通风口打开风扇、C打开通风口关闭风扇、D打开通风口和风扇)车内二氧化碳浓度进行分析研究。通风口关闭的状态,无论是否打开风扇及车速快慢,车内CO2浓度严重超标。通风口打开:不开风扇,以50km/h速度行驶,车内CO2浓度高于标准限量;速度提高到80km/h,车内CO2浓度可低于标准限量,通风口和缝隙的换气可以保障车内的空气质量;而打开风扇可以有效排除车内污染物。车速提高,各种通风模式的换气量都增加,属于缝隙换气贡献的比例增加,属于风扇换气贡献的比例减小,属于通风口换气贡献比例变化不大。基于研究结果,提出了一些减少车内污染的通风方式建议。     

报废汽车内饰件塑料浮选技术研究

报废汽车内饰件塑料品种复杂、难以分选,为此,以分离汽车内饰件中4种主体塑料——PP(聚丙烯)、ABS(丙烯腈-丁二烯-苯乙烯)、PC(聚碳酸酯)、PVC(聚氯乙烯)为目标,利用实验室自制浮选设备,考察了浮选液流量、溶气罐压力、润湿液浓度等因素对浮选效果的影响. 结果表明:当溶气罐压力为0.22 MPa、浮选液流量为10 L/min、润湿液中ρ(单宁酸)为15 mg/L时,一级浮选PP、ABS、PC、PVC效果达到最佳,其中PP和ABS为上浮料,二者上浮率分别为100%和98.63%;PC和PVC为下沉料,二者下沉率分别为98.95%和100%. 当溶气罐压力为0 MPa、浮选液流量为6 L/min、润湿液中ρ(单宁酸)为10 mg/L时,二级浮选完全分离PP/ABS;当溶气罐压力为0.24 MPa、浮选液流量为10 L/min、润湿液采用10 mg/L单宁酸和10 mmol/L癸二酸二丁酯时,二级浮选分离PC/PVC效果达到最佳,PC上浮率为92.87%,PVC下沉率为91.41%. 通过二级浮选分离,PP、ABS、PC、PVC的最终分离率分别达到100%、98.63%、92.87%和91.41%,显示出该二级浮选工艺在报废汽车内饰件塑料分选方面具有较为广阔的应用前景.