街道峡谷内车辆流动对反应性污染物传播特性影响的模拟研究

采用CFD（计算流体力学）数值模拟的研究方法,使用动网格技术,分析简单光化学反应下车辆流动及不同来流风速对双车道三维街道峡谷内污染物传播特性的影响.结果表明,车辆移动改变了峡谷内气流结构,以及背风侧与迎风侧活性污染物浓度分布的相对大小,有利于污染物在峡谷中的传播扩散;来流风使机动车尾气向建筑背风侧汇聚,并随着风速增加而加强,对近迎风侧车道车辆尾气淹没射流的影响比近背风侧车道大.在车辆移动与来流风的综合作用下,污染物的扩散能力得到显著增强.     

Trip-Based Explanatory Variables For Estimating Vehicle Fuel Consumption and Emission Rates

The current state-of-practice in the US for estimatingvehicle emissions is based on a single traffic-relatedexplanatory variable, namely average speed. Research,however, has demonstrated that the use of average speed asa single traffic-related variable is insufficient for theestimation of vehicle emissions. For example, although theEnvironmental Protection Agency (EPA) MOBILE5 model wouldindicate that a slowing of traffic typically increasesemissions, empirical research indicates the opposite inmany cases.The objective of this paper is to identify criticalaggregate trip variables as potential explanatory variablesfor the estimation of a vehicle's fuel consumption andemissions. Subsequently, statistical models for estimatingfuel consumption and emissions of hydrocarbon (HC), carbonmonoxide (CO), and oxides of nitrogen (NO_x) aredeveloped using these critical variables that include theaverage speed, speed variability, the level ofdeceleration, and the level of acceleration. The proposedmodels are demonstrated to be consistent with microscopicenergy and emission model estimates that are based on thevehicle's instantaneous speed and acceleration levels(coefficient of determination ranges from 0.88 to 0.96).     

提高交通安全——实现智能汽车的研究

主要介绍了通过智能汽车的研究 ,提高城市交通安全的必要性 ;综述了发达国家关于智能汽车研究的现状与趋势 ,并通过国外智能汽车发展的趋势 ;进一步论证智能汽车的研究是汽车工业发展的方向 ,也是提高交通安全的重要手段之一。此外 ,论文提出利用模式识别技术的智能汽车的结构框架 ;指出神经网络方法应用与模式识别技术结合的优势。最后 ,论文在阐述我国需要发展智能汽车的同时 ,提出应结合中国国情相应研究相关理论 ,为今后的实施奠定基础的近期目标 ,并提出展望     

城市汽车空气污染控制基准研究

本文论述了城市汽车空气污染研究的目标、基本方法及城市汽车污染控制区的划分原则和方法.汽车类型流动源采用整个控制区平均浓度作为分析对比的基础不合适,应该专门研究确定基准控制点.为了合理选择确定控制计算点,提出3种方法:峰值法、核心区和重点控制区法、9点平均法.9点平均法可以有效增加各类污染源的敏感点,同时又可避免增加该点位影响过大的缺陷.这种方法在其他类型大气污染源控制中也能发挥作用.     

Integrated energy management strategy of powertrain and cooling system for PHEV

ABSTRACT

Energy management strategy (EMS) is crucial in improving the fuel economy of plug-in hybrid electric vehicle (PHEV). Existing studies on EMS mostly manage powertrain and cooling system separately which cannot get the minimum total energy consumption. This paper aims to propose a novel EMS for a new type of dual-motor planetary-coupled PHEV, which considers cooling power demand and effect of temperature on fuel economy. Temperature-modified engine model, lithium-ion battery model, two motors, and cooling system models are established. Firstly, the separated EMS (S-EMS) is designed which manages powertrain and cooling system separately. Sequentially, after the analysis of thermal characteristics of the powertrain and cooling system, the thermal-based EMS (T-EMS) is then proposed to manage two systems coordinately. In T-EMS, cooling power demand and the charging/discharging energy of motors are calculated as equivalent fuel consumption and integrated into the object function. Besides, a fuzzy controller is also established to deicide the fuel-electricity equivalent factor with consideration of the effect of temperature and state of charge on powertrain efficiency. Finally, the hardware-in-loop experiment is carried out to validate the real-time effect of EMS under the New European Driving Cycle. The result shows that cooling power demand and temperature can significantly affect the fuel economy of the vehicle. T-EMS shows better performance in fuel economy than S-EMS. The equivalent fuel consumption of the cooling system of T-EMS decreases by 27% compared with that of S-EMS. The total equivalent fuel consumption over the entire trip of PHEV using T-EMS is reduced by 9.7%.     

Status of recycling end-of-life vehicles and efforts to reduce automobile shredder residues in Korea

The present end-of-life vehicle (ELV) recycle rate and management status during the dismantling stage were investigated to aid the establishment of policies for the management of ELVs by surveying information and using the results gained from questionnaires given to dismantlers. The average recycle rate at the dismantling stage was 44% of the mass of a new vehicle and the rest of the ELV was then compressed and transported to shredding companies to recover mainly the iron content, which averaged 38.7% of the mass of a new vehicle. Nonferrous metals such as copper, antimony, zinc, and aluminum accounted for only 1.5%. The automobile shredder residues (ASRs) were composed of light and heavy fluffs and soil/dust and amounted to 15.8% based on the mass of a new vehicle. The dumping of fluff and inorganic residues in landfill sites, however, will be restricted when new regulations are implemented to reduce the disposal amount to less than 5% of a new car, as has been done in European countries and in Japan. The detailed characteristics of ASR were investigated to suggest appropriate means of treatment such as volume reduction or the utilization of thermal technologies to meet future expected enforcement. Also, some concerns on hazardous pollutant release such as that of dioxins while utilizing such thermal treatment methods were considered. The present on-going research and development projects to meet such future management targets are also introduced.     

交通事故再现技术研究现状与发展趋势

道路交通事故再现不仅是交通事故责任鉴定和原因分析的重要方法,也是交通事故防治的重要内容。在详细介绍国内外事故再现计算机仿真技术的基础上,分析目前事故再现系统开发中事故现场数据采集技术、碰撞前后速度估算的技术、碰撞过程进行模拟的虚拟现实技术的研究现状与存在的问题,提出进一步优化的方向,进而达到完善交通事故模拟再现的目的。最后指出我国交通事故再现技术进一步研究的内容和发展趋势。     

化学事故救援方舱舱室环境安全性模拟研究

运用计算流体动力学(CFD)方法,对具有超压防护功能的某化学事故应急救援手术方舱室内气体污染物运动扩散的规律以及对人员安全的影响进行了数值模拟,其研究结果表明:当大气环境中氢氰酸(HCN)浓度为5mg/L时,前10s从常规进风口进入舱室的HCN在滤毒通风装置开启后,随气流运动逐渐向整个舱室扩散,经净化空气的混合稀释作用,绝大部分通过舱体缝隙排出舱室,30min内舱室HCN浓度的总量下降了95.1%,说明超压防护很好地保证了舱室环境的安全性。     

车辆事故紧急呼救技术发展综述

综述了车辆事故紧急呼救技术的原理,从车辆事故检测识别技术、移动车辆定位技术、无线通信技术和地理信息系统几方面概述车辆事故紧急呼救技术的研究内容。进一步介绍车辆事故紧急呼救技术的国内外研究和应用现状,并从车辆事故识别技术、地图匹配及组合导航、集群通信及通信网络几方面总结并指出车辆事故紧急呼救技术的关键技术和难点。展望了车辆事故紧急呼救技术的发展趋势,并就我国发展车辆事故呼救技术的可行性和发展方向进行探讨。     

实现道路交通安全的营运车辆监控系统框架研究

当前营运车辆监管中,交通管理部门、运输企业和司乘人员3方没有直接的信息通道,导致监管不到位,影响道路交通安全。笔者探讨了营运车辆监控的信息传输通道;以GPS、无线通信技术和互联网为基础,设计了营运车辆监控的技术框架,实现了联系3方的信息传输通道;分析框架实现的关键技术,包括道路限速数据库,车辆超速、疲劳驾驶、超载等违法行为的判定模式等;以广东省营运车辆监控系统为例,验证了框架的可行性。该技术框架使司乘人员的交通违法行为被及时警告和提醒,交通管理部门可以及时制止交通违法行为,可以主动预防交通事故,提高道路交通安全水平。