改进灵敏度矩阵的矿井通风故障源诊断及传感器布置研究

利用当前的矿井通风安全监测监控系统,只能反映安设风速传感器的井巷风量发生变化,至于变化是由该条巷道故障引起的,还是由于拓扑关系原因引起的,都无法诊断故障源,通风系统的故障可以归结为分支的风阻发生变化。如果分析每一条分支风阻变化对通风系统的影响,即每一条分支都安设风速传感器是不可能的。因此,井下风速传感器的布置最小数量及位置问题也是研究的重点。改进灵敏度矩阵,建立分支灵敏度0-1矩阵和通风网络故障巷道范围库,用以确定可能引起风速超限的故障巷道范围。最后,提出最少全覆盖布点法,给出分支覆盖度和影响巷道范围库的概念,用以求得风速传感器的宏观布点。     

工作竖井与隧道连接处支护结构横向地震响应

建立了工作竖井与盾构隧道、明挖隧道相连的空间交叉结构三维模型,采用FLAC3D对该复杂结构进行了横向地震响应分析,得到了工作竖井与隧道连接处支护结构关键点的位移和应力响应规律。通过对地震横向激励过程中竖井与隧道连接处支护结构收敛位移和关键点主应力峰值的分析,对该结构的横向抗震性能做出了评价。     

Amalgam in Dentistry A Health Hazard for Dental Personnel?

In a cross sectional study done in 1993 among dental personnel in Norrbotten, self-reported prevalence of muscular pain, headache, tremor, insomnia, irritation, impaired memory and depression, as well as information regarding different mercury exposures were collected Mercury exposures were determined as “number of amalgam fillings in teeth,” “years in practice,” “insufficient ventilation at work,” “total number of amalgam removed, produced and polished per day,” and “working in dental clinics.” As controls, physicians and nurses from the same geographical area were selected. The correlation between symptoms and different mercury exposures was calculated using logistic regression. The results suggested a higher prevalence of muscular fatigue and tremor for female dental personnel compared to controls Controls reported a lower prevalence of symptoms with increasing number of amalgam fillings in teeth. There was no correlation between the number of amalgam fillings handled per day and symptoms for dental personnel. Male dental personnel associated muscular fatigue headache, impaired memory, and depression with increased handling of amalgam in the clinic’ whereas the female dental personnel associated the same symptoms with the number of amalgam fillings in teeth. The strongest correlation was found between symptoms and insufficient ventilation at dental clinics for dental personnel.     

Dust Emission and Efficiency of Local Exhaust Ventilation During Cast Iron Grinding

A method of determining dust emission and efficiency of its removal by means of local exhaust ventilation from machinery has been described. It complies with Standard No. EN 1093-3:1996 (European Committee for Standardization, 1996) and consists in determining air pollution concentra-tions in the measurement duct used for air removal from the chamber incorporating devices to be tested. The air volume stream that is pumped is measured at the same time.

Test results are presented for dust emission and the efficiency of local exhaust ventilation for cast iron grinding by means of manual power tools and a bench-sander. It has been found that application of local exhaust ventilation contributes to a significant reduction of dust emission with efficiency greater than 90%.     

A ventilation cooling shirt worn during office work in a hot climate: cool or not?

The aim of the study was to identify whether a ventilation cooling shirt was effective in reducing heat strain in a hot climate. Eight female volunteers were exposed to heat (38?°C, 45% relative humidity) for 2?h with simulated office work. In the first hour they were in normal summer clothes (total thermal insulation 0.8?clo); in the second hour a ventilation cooling shirt was worn on top. After the shirt was introduced for 1?h, the skin temperatures at the scapula and the chest were significantly reduced (p?<?0.05). The mean skin and core temperatures were not reduced. The subjects felt cooler and more comfortable by wearing the shirt, but the cooling effect was most conspicuous only during the initial 10?min. The cooling efficiency of the ventilation shirt was not very effective under the low physical activity in this hot climate.     

基于CFD模拟的不同尺度竖井模型内烟气温度分布相似性的研究

通过小尺寸实验来研究实际建筑结构的火蔓延和烟气控制是一种已经被验证的十分有效的方法。经典方法中尺寸缩放只需要保证Froude数不变即可。采用CFD模拟的方法研究由火灾引起的烟气羽流在高层建筑竖井内的温度分布情况,建立三种不同尺寸高层建筑竖井的相似模型,并对比模拟结果,得出了尺寸缩放的规律:在保证Froude数不变的前提下,还需保证竖井结构内的流动为湍流;同时得到了着火房间通风口无量纲面积大小和火源位置变化对不同尺寸模型内流动相似性效果的影响规律。     

障碍物对隧道火灾中竖井自然排烟效果的影响*

为研究障碍物对隧道火灾中竖井自然排烟效果的影响,利用数值模拟方法分析不同的纵向风速和隧道内障碍物所处的不同位置对隧道及竖井内温度场、流场结构的影响,并根据模拟结果计算竖井排出热量。结果表明:随着火源与障碍物纵向距离的改变,在近火源区域,竖井后方会发生吸穿现象;在中间区域,障碍物后方发生边界层分离,烟气层变厚;在近竖井区域,竖井和负压区的耦合作用使烟气层变薄;排出热量随着纵向风速的增大先增加后减少,临界风速为1.5 m/s。     

竖井消能工折板压强及脉动特性分析*

为研究泄流过程中折板式竖井消能工水动力荷载作用,以某深隧排水工程竖井为研究对象,开展正态水力模型试验,研究恒定流与非恒定流条件下折板压强分布规律及脉动特性,分析折板间距和倾角对频谱特征影响。结果表明:上层折板承受时均压强为中层和下层折板1.5~3倍;恒定流条件下折板瞬时压强脉动幅值随入流量和折板间距增大而增大,随折板倾角增大而减小,功率谱密度优势频段为0~2.5 Hz;非恒定流条件下折板瞬时压强自上而下依次减小,功率谱密度优势频段介于0~4.0 Hz。研究结果可为竖井折板结构防振设计提供参考。     

抽出式通风机数量对地铁区间隧道通风排烟能力影响的实验研究*

为量化抽出式通风机及其数量对排烟道与行车道内流量分配的影响,提出1个新的量化指标——通风排烟系统性能系数,即为抽出式与压入式通风机组合功耗与排烟体积流量的比值。为确立通风排烟系统性能系数,依托某过海区间隧道,搭建隧道通风排烟模型实验系统,测定排烟道与行车道所构成的风道内流动参数。结果表明:以吊顶排烟口为镜像面,行车道静压对称分布;对于行车道速度而言,双压二抽表现为对称分布,双压一抽为近对称,双压零抽为偏置分布;偏置分布的排烟道速度出现在双压一抽中,近对称属于双压零抽,对称显现于双压二抽。将数据进行分析计算后可知,性能系数最低的是双压零抽两通风机组合。     

1981~2017年四川省大气自净能力变化特征分析

利用四川省1981~2017年逐日地面气象观测资料和2017年1月环境监测资料,计算分析了四川省大气自净能力指数的时空变化特征及其影响因子,并初步探讨了2017年1月成都市大气自净能力指数与空气质量的关系.结果表明：四川省大气自净能力指数的分布形势以川西高原北部、川西高原南部、攀西地区、盆地西南部大气自净能力为较好到好,省内其余大部地区大气自净能力较差到差.近37a来,四川省、川西高原、攀西地区多年变化呈减弱趋势,四川盆地多年变化趋势不显著.影响因子中,四川省降水日平均大气自净能力指数小于非降水日.四川省以及各区域平均风速、通风量、风速较大日数和小风日数与大气自净能力指数呈显著正和负相关关系;混合层厚度与大气自净能力指数呈显著的正相关关系.