应用呼吸-滴定测量监测硝化动态过程

将pH值在线监测与药品自动投加系统与已开发的混合呼吸测量仪集成,组成自动呼吸-滴定测量仪,同时测定废水生物处理过程氧气利用速率(OUR)和质子变化速率(HVR).对活性污泥硝化过程定时测定NH4+-N浓度,比较其与基于HVR或OUR预测的NH4+-N浓度间的一致程度,评估自动滴定测量装置测试硝化过程动态的性能.结果表明,在初始NH4+-N浓度分别为20,25mg/L的间歇试验中,实测值数组与基于OUR的预测值数组间的相关系数分别为0.9967和0.9972,与基于HVR的预测值数组间的相关系数分别为0.9991和0.9992,表明OUR和HVR均能及时准确地反映硝化过程的动态特性.     

基于超声空化原理的废旧线缆回收方法

废旧线缆是一种可以回收利用的资源。目前普遍使用机械破碎方法回收废旧线缆,具体工艺是采用机械磨削的方法分离铜和绝缘皮,然后用筛分法获得。由于此工艺中包含有磨削过程,因此会损失很大一部分铜,从而造成资源浪费。为此,研究使用超声波工艺回收电线,并探讨一些因素对分离率的影响。研究结果表明:利用超声波的空化效应分离电线中的金属和塑料,能有效避免铜的大量损失。当水温为60℃,分离率达到最高值;电线长度与分离率之间基本成反比关系;电线总量的大小对分离率也有一定的影响。     

淮南市浅层地下水重金属元素的富集特征

以淮南市浅层地下水为研究对象,采集并测试了130个水样中Fe、Mn、Cu、Zn、Pb、Cd、Ni等元素的含量及相关指标。通过分析pH与重金属的相关性,得出了重金属在水中的富集速率,即VFe〉VCu〉VZn〉VPb〉VMn〉VNi〉VCd。利用主成分对7种重金属进行分类并分析其富集成因,最后将测试结果与土壤重金属含量相比较,确定了浅层地下水中的重金属元素的富集特征。     

固定化藻菌对水产养殖废水氮、磷的去除效果

对比研究了藻菌混合包埋(MI)和藻菌分层包埋SI1(藻外菌内)、SI2(藻内菌外)固定化藻菌对养殖废水中氮、磷的去除效果,以及光照、温度对3种处理脱氮去磷的影响。试验结果表明,在设计条件下处理72 h MI与SI2对氮的去除率分别为91.20%和90.77%,显著高于SI1。MI与SI1的去磷效果显著强于SI2,处理72 h后2者对磷的去除率分别为90.31%和84.78%,SI2仅为32.09%。当[光]照度6 000 lx时,SI2氮去除率在88%以上,显著高于MI与SI1;[光]照度6 000 lx时,SI2与MI对氮的去除率均高于89%,显著高于SI1。MI与SI1对磷的去除率在85%以上,显著高于SI2。MI、SI1、SI2去除氮、磷的最佳温度为20~30℃。     

镉、汞、铅和石油烃复合污染对渤海湾常见渔业资源生物的影响初探(Effects of the Combined Pollution of Cd, Hg, Pb and Petroleum Hydrocarbons on Common Fishery Species in the Bohai Bay)

通过对1996～2005年渤海湾近岸海域海水镉、汞、铅和石油烃浓度变化的分析,发现海水中镉浓度呈明显上升趋势,汞、铅和石油烃则无明显变化趋势.加速生命试验法模型(Accelerated Life Testing model)的研究显示,1996～2005年渤海湾近岸海域海水镉、汞和铅平均浓度均已超过其对渤海湾常见渔业资源生物的安全浓度.镉、汞、铅和石油烃对生物的长期致死率鱼类分别为4.5%、16.3%、0.0%和12.0%,甲壳类为0.4%、7.9%、0.3%和6.6%,双壳类为10.5%、0.2%、0.2%和2.3%.效应加和模型(Independence Action model)的估算表明,在镉、汞、铅和石油烃组成的复合污染条件下,渤海湾常见鱼类、甲壳类和双壳类的长期死亡率分别为29.7%、14.6%和12.9%,其种群增长率分别降低约6.4%、14.6%和12.9%.与镉、汞、铅和石油烃单种污染物暴露相比,其复合污染导致的渤海湾常见渔业资源生物种群(鱼类、甲壳类和双壳类)增长率的降低更明显.因此,复合污染是导致渤海湾渔业资源衰退的重要因素。     

Validation of Methods for Determination of Metabolic Rate in the Edholm Scale and ISO 8996

The aim of this study was to validate the Edholm scale (Edholm, 1966) and the ISO 8996 standard (International Organization for Standardization [ISO], 1990) by comparing the metabolic rates estimated for both methods with the actual measured metabolic rate (M_Meas) in 6 manual material handling tasks simulated under laboratory conditions. The metabolic rate was calculated from oxygen consumption VO₂ (19 participants) according to Standard No. ISO 8996 (ISO, 1990). Additionally, the participants estimated perceived exertion using the Borg scale. The metabolic rates derived from the Edholm scale (M_Edh) overestimated 5 of 6 activities by 34-50% (α = .05). The metabolic rates derived from ISO 8996 (M_ISO) overestimated all activities by 7-38% (α =.05).     

Isometric Pull and Push Strengths of Paraplegics in the Workspace: 2. Statistical Analysis of Spatial Factors

The effect of reach levels, horizontal angles, and vertical angles on isometric pull and push strengths of male and female was determined. Highly significant increases in men’s push strength were found between extreme to maximum reaches, and from extreme to normal reaches. However, for women’s push strength, a significant increase was found only between extreme to maximum reach. Significant or highly significant increases were found in men’s and women’s pull strength between the horizontal angle (θ) sagittal through the active shoulder (90°) and other angles (0, 45, and 135°). However, for men’s push strength, highly significant increases were found between the horizontal angle 45° from the frontal plane, and other angles. For women’s push strength, significant or highly significant increases were found between the horizontal angles 0° and angles of 90 and 135°. For men’s and women’s pull strength, significant or highly significant increases were found between the vertical angle (?), 90°, and other angles (–20, 0, and 45°). Similar increases were found for women’s push strength between the 45° angle and other angles. In the design of a workstation for paraplegics that requires pull and push forces, consideration must be given to the spatial factors.     

大气环境下风电塔筒金属材料的应力腐蚀

塔筒金属材料在大气中的应力腐蚀会导致脆性断裂,从而对产生严重的后果。本文重点论述了应力腐蚀的几种腐蚀机理以及Cl-对应力腐蚀的影响,并介绍了应用较广的慢应力速率试验方法。     

低噪声降频器可靠性试验设计

可靠性技术是提高产品质量的有效手段,具有广阔的应用前景。本文结合可靠性技术对低噪声降频器进行可靠性试验并对故障数据进行分析,结果表明,抽取的高频头样品合格率达96.25%,平均无故障时间超过5000小时。     

最优安全文明施工措施费费率计取模型的构建与应用

建筑工程建设周期长、施工环境复杂、可变因素多,是一项安全系数低的系统工程,其安全文明施工措施费计取费率的合理性直接影响到建筑安全生产水平。首先建立万人死亡率与安全文明施工措施费基本费率的函数关系,并结合建筑施工安全的社会总成本函数,构建最优安全文明施工措施费费率的非线性计取模型;然后以江苏省安全文明施工措施费为例应用该模型,经过优化后的江苏省措施费的基本费费率为2．33％,现场考评费率为1．28％,奖励费率为0．47％-0．82％;最后得出目前江苏省安全文明施工措施费费率较低,同时也证明该模型是有效可行的。