船上生活饮用水中亚硝酸盐污染及其治理

经测定，某航次船上饮用开水中亚硝酸盐的浓度为0.180mg/dm^3，超过GB8537-87标准35倍；冷自来水中为1.76mg/dm^3，超标350倍。航次结束后，从码头自来水管取的四份水样中亚硝酸氮则全部未检出。本文报道了船上饮用水与生活用水受到具有致癌性的亚硝酸盐污梁，并为消除亚硝酸盐污染提出了对策。     

The safety of fetoscopy: (I). Effect of umbilical vessel puncture on the fetal heart rate and cord histology

The fetal heart rate (FHR) was continuously monitored during 42 umbilical vessel punctures performed at the placental insertion of the cord in 24 diagnostic fetoscopies in which pure fetal blood was obtained. In only one patient did a deceleration first appear during puncture and aspiration of fetal blood. In two patients decelerations preceded fetoscopy and in two others they began during the fetoscopy but before puncture of an umbilical vessel. In 19 patients, the FHR did not change at all during the procedure. Fetal haemorrhage after sampling was either absent or minimal. Six pregnancies were terminated because a positive diagnosis had been made and 18 healthy babies were born. Umbilical cords were examined after 7 terminations of pregnancy and after 6 deliveries. In the former group the puncture could just be seen with the naked eye and the needle track was demonstrated histologically in 6. No traces of the puncture or other abnormalities were found in the cords after delivery. Fetal blood sampling from umbilical cord vessels, particularly at the placental insertion of the cord, is the technique of choice since pure fetal blood can be obtained without increasing the risk of fetoscopy.     

On the thermal rupture of 1.9 m propane pressure vessels with defects in their thermal protection system

This paper describes the results from a series of fire tests that were carried out to measure the effect of defects in thermal protection systems on fire engulfed propane pressure vessels.

In North America thermal protection is used to protect dangerous goods rail tank-cars from accidental fire impingement. They are designed so that a tank-car will not rupture for 100 min in a defined engulfing fire, or 30 min in a defined torching fire. One common system includes a 13 mm blanket of high-temperature ceramic fibre thermal insulation covered with a 3 mm steel jacket. Recent inspections have shown that some tanks have significant defects in these thermal protection systems. This work was done to establish what levels of defect are acceptable from a safety standpoint.

The tests were conducted using 1890 l (500 US gallon) ASME code propane pressure vessels (commonly called tanks in the propane industry). The defects tested covered 8% and 15% of the tank surface. The tanks were 25% engulfed in a fire that simulated a hydrocarbon pool fire with an effective blackbody temperature of 870 °C.

The fire testing showed that even relatively small defects can result in tank rupture if the defect area is engulfed in a severe fire, and the defect area is not wetted by liquid from the inside. A wall failure prediction technique based on uniaxial high-temperature stress rupture test data has been developed and agrees well with the observed failure times.     

全球液化石油气运输网络贸易社区特征及其演化分析

液化石油气在全球清洁能源消耗市场中扮演着极为重要的角色,其通过船舶在不同港口之间进行运输,而港口之间通过局部密集的运输关系,形成了联系极为紧密的贸易社区。采用复杂网络社区探测方法,基于2013—2017年全球液化石油气船舶轨迹大数据构建运输网络,并对其贸易社区特征及其演化趋势开展分析。结果表明:(1)液化石油气(Liquefied Petroleum Gas,LPG)贸易社区内的港口之间的联系更加紧密,不同社区内的枢纽港口联系也日益紧密;(2)各个贸易社区的规模呈现出增长趋势,且同一社区内的港口在地理空间上变得更为集聚;(3)亚太地区、中东、西北欧和地中海地区形成的社区在全球LPG贸易中一直保持着重要地位,而随着时间推移,美洲社区已逐渐从一个相对孤立的社区发展成为与其他社区存在紧密联系的社区。     

美国海军舰艇命名体系研究

美国海军舰艇命名体系由任命前缀、舰艇名称、分类代号、舷号4类要素构成,首先分析了每类要素对于命名体系的贡献,然后基于美国海军舰艇命名体系,以美国海军舰艇名册为数据源,通过要素提取、规则建立等步骤分析美国海军现役舰艇组成。经过分析,美国现役715艘舰艇分为战斗舰、辅助舰、战斗艇、支援艇、未在分类代号中定义等5大类67类型177级别,通过对比基于类型与级别规则、基于任命前缀规则的结果挖掘出美国海军现役舰艇组成规律。     

小冲杆试验测定重离子辐照A508-3钢的硬化和脆化

目的采用小冲杆测试方法测量高能重离子辐照反应堆压力容器A508-3钢的辐照硬化和脆化特性,为工况条件下反应堆压力容器寿命预测提供实验依据。方法采用兰州重离子加速器提供的高能C^(6+)离子通过减能装置在290℃条件下开展A508-3钢辐照实验,并在样品表面形成一定厚度、准均匀分布的离位损伤层。通过开展不同辐照剂量辐照样品的小冲杆测试,得到不同辐照剂量A508-3钢的小冲杆载荷-位移曲线。通过对小冲杆测试得到的载荷-位移曲线的分析,测定不同辐照剂量样品的辐照硬化和脆化特性。结果压力容器A508-3钢辐照样品的硬化和脆化随着辐照剂量的增加逐渐增强,0.15 dpa以前呈线性增长,而后缓慢增大,约0.2 dpa时达到饱和趋势。结论通过小冲杆测试可以得到离子辐照样品的硬化和脆化行为,A508-3钢辐照硬化和脆化行为具有一致的变化趋势。     

压力容器制造监检中对若干问题的处理

针对压力容器制造监检中某些受检单位在法规标准的理解上存在误区或者疏忽、不知如何进行后续整改工作的现状,笔者结合多年压力容器监督检验的工作经验,提出自己的解决方案,以供参考,也希望广大读者在遇到类似情况时能够正确理解并执行相关法规标准.     

氨制冷压力容器定期检验相关问题分析

随着大量制冷装置的建成和使用,氨制冷企业安全问题日益突出,定期检验作为保证在役氨制冷压力容器安全使用的一个重要环节,目前仍存检验依据不清、检验项目不明、检验针对性不足等问题.文中对氨制冷压力容器定期检验现状进行了介绍,对氨制冷压力容器损伤机理进行了分析和讨论,从损伤模式判别的角度提出了相应的检验策略,给相关人员提供一些...     

确定压力容器安全系数原则

压力容器安全系数与材料参数紧密相关,确定材料许用应力值时,需要同时考虑材料抗拉强度和屈服强度更为合理;奥氏体不锈钢材料具有非常好的应变强化能力和韧性,为充分发挥奥氏体不锈钢材料优良性能,选取奥氏体不锈钢材料许用应力值时,需要特殊考虑。压力容器安全系数的选取建立在经验基础上,在保障压力容器安全性前提条件下,为节省材料和降低成本,随着理论研究深入和科学实验的进步,压力容器安全系数有所降低,这是科学设计和实用成功经验结合的结果。     

南京理工大学高压实验室及其研制高压水射流切割机

南京理工大学高压实验室自８０年代初建立以来，在高压容器及武器发射管的自紧理论和工程应用、高压零部件研制、高压传感器和信号放大显示系统、高压介质等方面做了大量的工作。９３年以来，进行了水射流切割机的研制工作，解决了超高压缸体的动态密封、高压缸体的自增强、无触点式换向传感器、内衬不锈钢组合型高压容器等诸多问题，试制成功了水射流切割机样机。