船体钢室内加速腐蚀和海水腐蚀的相关性研究

通过在天然海水中添加H2O2进行室内模拟加速试验。通过失重分析、腐蚀形貌分析和产物组成分析研究了船体钢海水腐蚀模拟试验和自然腐蚀试验的相关性。利用Spearman秩相关系数法得到了相关系数。结果表明,在室内模拟加速试验与自然环境试验中,船体钢的腐蚀规律均符合幂函数模型,Spearman秩相关系数较高,两种试验方法具有较好的相关性。     

反应堆压力容器材料中Ni界面偏析对富Cu溶质团簇演化影响的模拟研究

目的定量研究镍原子的界面偏析对降低团簇与基体间表面能及促进团簇形核、提升团簇数密度的贡献,以深化对反应堆压力容器溶质团簇演化过程和辐照脆化中溶质团簇机理的认识。方法通过考虑Fe-Cu-Ni三元合金溶质团簇中镍原子的界面偏析,利用团簇动力学方法研究了团簇中镍原子分布对富铜溶质团簇演化的影响。结果相比铜团簇,加入镍原子后的铜镍团簇自由能显著降低,团簇数密度显著提高;随团簇中镍原子界面偏析加剧,团簇自由能与团簇尺寸逐渐下降,团簇数密度先小幅上升,后下降。结论镍可以促进富铜溶质团簇的形核,提升团簇的数密度,而其中镍原子的界面偏析对促进团簇形核的贡献可能有限;在团簇生长过程中,镍原子的界面偏析可能会抑制其生长,减小团簇的尺寸。     

Effects of vacuum levels,carbon dioxide,and structural sizes of linked vessels on dump vessel vented

The method of explosion venting is widely used in industrial explosion-proof design due to its simple operation, economical and practical features. A dump vessel vented platform was built. By changing the vacuum level and the gas in the dump vessels and the structural size of linked vessels, the pressure in the explosion vessel and the dump vessel was compared, and the influencing factors of explosion venting investigated. The main conclusions are as follows: In the explosion venting process, the higher the vacuum in the dump vessel, the smaller the pressure peak of the explosion vessel and the dump vessel, and the faster the explosion pressure is lowered. When the dump vessel is under the same vacuum level and the gas in the dump vessel is CO₂, the maximum pressure of the explosion vessel and the dump vessel is less than the maximum pressure when the containment medium is air. Under the same vacuum condition, the larger the volume ratio of the dump vessel and the explosion vessel, the smaller the pressure peak of the explosion vessel, the faster the explosion pressure drops, and the volume of the dump vessel reaches or exceeds the explosion vessel. Increasing the volume ratio of the containment vessel to the explosion vessel facilitates protection of the explosion vessel and the containment vessel. Under the same vacuum condition, when the gas explosion in 113 L vessel vents into 22 L vessel, the longer the length of the pipe, the greater the maximum pressure in the spherical vessel. When the gas explosion in 22 L vessel vents into 113 L dump vessel, as the pipeline grows, the maximum pressure in the two vessels decreases, but the reduction is not significant. In practical application, it is recommended to use a vacuum of 0.08Mpa or more for the dump vessel vented, and the containment medium is CO_2.In terms of the structural size of the container, it is recommended that the ratio of the receiving container to the explosion container be as large as possible, and the pipe length be as long.     

一起反应釜爆炸事故原因分析

分析了某化工厂一起反应釜爆炸事故的可能原因,认为事故发生的原因主要是氮气置换失效及提前对反应釜进行加热,提出了预防措施.     

改进的RBI技术在海上平台压力容器中的应用

海上平台压力容器检验周期的计算方法通常会产生过少或过度检验的问题,确定合理的检验周期对平衡压力容器的安全操作和检验成本具有重大意义。采用改进的RBI技术,对2种泄漏类型的压力容器系统分别设定不同的可接受风险,并将渐变模型引入压力容器检验周期计算方法中,计算了某海上生产平台上的51台压力容器的检验周期。结果表明,共有22个压力容器部位的检验周期得到调整,验证了改进的方法可以使检验周期数值更真实合理地反映设备风险,但对腐蚀率较小的损伤机理,采用渐变模型改进容器部位的检验周期效果不明显。     

反应堆压力容器保温层辐射屏蔽组件传热计算分析及屏蔽材料试验研究

目的 确保华龙一号HPR1000反应堆压力容器保温层辐射屏蔽组件在运行工况下的可靠性、安全性以及能够有效执行其功能。方法 采用基于传热理论结合经验公式的理论计算方法,以及流固耦合的有限元仿真分析,对辐射屏蔽组件的运行温度进行计算。针对屏蔽材料在受热状态下的性质变化,进行一系列的热态性质试验。结果 理论计算方法得到的结果为163.36~168.74 ℃,有限元仿真分析得到的结果为236.85~266.85 ℃,两者偏差约100 ℃。对造成该种差异的原因进行了分析,发现仿真分析方法得到的结果的置信度更高。屏蔽材料在受热状态下,其体积膨胀率可达到38.82%,而当屏蔽材料受热超过其温度限值204 ℃后,将出现明显的粉化等物理状态恶化的趋势。结论 流固耦合的有限元仿真分析方法更适用于辐射屏蔽组件的传热过程计算,同时获取了屏蔽材料物理性状受热变化趋势,对屏蔽组件的选材及结构设计具有指导意义。     

压力容器声发射信号参数分析方法的探讨

参数分析是声发射技术应用中的重要环节之一,因为它直接关系到能否正确反映被检对象的物理状况。本文集多年检测的经验,提出了参数分析的几种方法以及参数分析中须注意的问题,力求通过参数分析方法来客观、合理地表征检测对象的物理状况。     

液氦罐车碰撞仿真安全性研究

本文采用s0Mworks、ANSyS／Workbench、LS—DYNA等软件对常温裸形的液氨罐车进行了碰撞仿真研究，获得了多种情形下罐车的碰撞性能，为以后展开实车碰撞提供了重要的技术支撑。     

微压供热堆压力容器结构设计与力学分析

目的对微压供热堆HAPPY200的压力容器进行结构设计及分析。方法针对HAPPY200的特点,满足堆工、热工等专业要求,完成此微压供热堆堆本体的结构设计,并根据ASME锅炉和压力容器规范(ASME BPVC规范)进行压力容器的力学计算校核。微压供热堆HAPPY200采用池壳结合的方式,反应堆200 MW热功率两回路设计,设计压力1.6 MPa,出口温度120℃。压力容器采用不锈钢材质、35 mm壁厚的设计,采用ASMEBPVC规范对其进行力学计算校核。结果此结构中所得到的力学结果均小于ASMEBPVC标准所要求的限值。结论微压供热堆HAPPY200的压力容器设计满足堆工、热工等专业要求,其力学评定通过ASME BPVC规范要求。     

Transaction of Marine Fishing Right: Theoretical Analysis

Abstract

The difference between fishermen’s fishing catch and the optimal fishing catch is the basic reason for the transaction of marine fishing rights (TMFR). The effects of productive cost, non-productive cost, use-cost, transaction cost, productive revenue and non-productive revenue on the TMFR and the optimal fishing catch are analyzed. This paper draws following conclusions: the non-productive revenue has a positive effect on the TMFR, and other factors, such as non-productive cost, use-cost and transaction cost, have a negative effect; the TMFR will promote the resource allocation; the high transaction cost may affect the implementation of TMFR.