生物酶破胶水基压裂液影响因素的试验研究

与其他压裂液破胶剂相比,生物酶破胶剂能很好地保护环境,而影响生物酶破胶水基压裂液效果的因素主要是底物的浓度、酶的加量、pH值以及破胶温度.本文采用正交试验设计,分析了各因素对生物酶破胶水基压裂液效果的影响程度,并分析了各因素不同水平对压裂液黏度的影响趋势,结果表明调整各因素的不同水平可以实现不同的压裂液黏度和破胶时间,...     

湛江电力公司氮氧化物减排措施

介绍了湛江电力公司4×300 MW燃煤发电机组减排氮氧化物实施的技术。     

炼厂含油污泥与石油焦共成浆性及其影响因素

我国所加工的原油重质化和劣质化现象日益严重,导致以高硫石油焦、含油污泥为代表的副产物产量大幅增加,对生态环境构成了潜在威胁. 为利用成熟的水煤浆气化工艺对废物无害化处理,进行了炼厂含油污泥与石油焦制备高性能混合浆液的研究. 采用干磨湿配制浆工艺,考察了含油污泥与石油焦的共成浆性,分析了石油焦粒度分布、含油污泥添加量、温度、pH等对成浆性的影响. 结果表明:石油焦颗粒疏水性较强、比表面积小,其单独成浆时最佳粗细颗粒质量比为5.5∶4.5;含油污泥与石油焦共成浆时,其最佳添加量为3.0%;在30℃,pH为7~9条件下,可制得表观黏度低于1000mPa·s,稳定时间超过48h,流动性较好的混合浆液,可满足水煤浆气化无害化工艺的进料要求.      

An analytical platform for cumulative impact assessment based on multiple futures: the impact of petroleum drilling and forest harvesting on moose (Alces alces) and marten (Martes americana) habitats in northeastern British Columbia

The combined influence on the environment of all projects occurring in a single area is evaluated through cumulative impact assessments (CIA), which consider the consequences of multiple projects, each insignificant on its own, yet important when evaluated collectively. Traditionally, future human activities are included in CIA using an analytical platform, commonly based on complex models that supply precise predictions but with reduced accuracy. To compensate for the lack of accuracy in current CIA approaches, we propose a shift in the paradigm governing CIA. The paradigm shift involves a change in the focus of CIA investigations from the detailed analysis of one unlikely future to the identification of the patterns describing multiple potential future changes in the environment. To illustrate the approach, a set of 144 possible and equally likely futures were developed that aimed to identify the potential impacts of forest harvesting and petroleum drilling on the habitat suitability of moose and marten in northeast British Columbia, Canada. The evolution of two measures of habitat suitability (average habitat suitability index and surface of the stands with habitat suitability index >0.5) revealed that the human activities could induce cycles in the habitat dynamics of moose and marten. The planning period of 100 years was separated into three distinct periods following a sinusoidal pattern (i.e., increase - constant - decrease in the habitat suitability measures). The attributes that could induce significant changes in the assessment of environment are the choice of harvesting age and species.     

A Literature Review of Poly(Lactic Acid)

A literature review is presented regarding the synthesis, and physicochemical, chemical, and mechanical properties of poly(lactic acid)(PLA). Poly(lactic acid) exists as a polymeric helix, with an orthorhombic unit cell. The tensile properties of PLA can vary widely, depending on whether or not it is annealed or oriented or what its degree of crystallinity is. Also discussed are the effects of processing on PLA. Crystallization and crystallization kinetics of PLA are also investigated. Solution and melt rheology of PLA is also discussed. Four different power-law equations and 14 different Mark–Houwink equations are presented for PLA. Nuclear magnetic resonance, UV–VIS, and FTIR spectroscopy of PLA are briefly discussed. Finally, research conducted on starch–PLA composites is introduced.     

城市生活垃圾填埋场渗滤液粘度研究

采用旋转粘度计测试了CODCr浓度为 10 0 0～ 75 0 0 0mg L、温度在 5～ 70℃范围内的渗滤液粘度。实验结果表明 ,相同温度下渗滤液的粘度值与CODCr浓度呈线性关系 ;不同浓度渗滤液中溶质性质的差异是造成渗滤液比浓粘度差异的原因 ;研究填埋场水分运移时 ,可以不考虑粘度对渗滤液流动的影响。     

新型絮凝剂聚环氧氯丙烷胺的合成研究

以环氧氯丙烷和二甲胺为原料,乙二胺为交联剂,制备有机阳离子聚合物,研究乙二胺加入量、反应温度、环氧氯丙烷和二甲胺的摩尔比、聚合时间等对聚合物粘度和阳离子度的影响,利用电子透射电镜(TEM)和电子扫描电镜(SEM)对聚合物的结构形貌进行了表征,结果表明,环氧氯丙烷和二甲胺的摩尔比为1．5：1,乙二胺加入量为3％时,聚合物的粘度和阳离子度最大,具有较强的吸附架桥和电中和作用,对染料废水有较好的脱色效果。     

用二阶闭合理论确定的大气扩散系数的分析

本文分析了作者以前得到的一种扩散系数的某些结果,认为这种扩散系数解释了垂直湍流和风切变的联合作用使水平扩散增大的实验观测结果;建立了与雷诺应力间的函数关系,在简化情况下,与泰勒理论得到的结论类似。在边界层低层,湍流扩散系数与粘性系数是不相等的,有时会有较大差别。     

Fenton预处理强化污泥脱水:胞外聚合物和黏度的特性研究

Fenton试剂具有高效破坏污泥絮体及改善污泥生物可降解性的能力,而被视为强化污泥脱水的有效手段。对Fenton预处理强化污泥脱水过程中污泥胞外聚合物(EPS)和黏度对污泥脱水性能的影响进行了研究,污泥脱水性能采用毛细吸水时间(CST)评价。结果表明:Fenton预处理时,H_2O_2添加量和m(H_2O_2)∶m(Fe~(2+))对污泥的脱水性能有重要影响,优化的污泥脱水条件为m(H_2O_2)∶m(Fe~(2+))=1∶1,H_2O_2添加量200 mg/g(VSS);m(H_2O_2)∶m(Fe~(2+))和H_2O_2添加量对污泥中EPS分布影响显著,EPS分量分布具有明显差异,可能原因为Fenton试剂对污泥絮体结构的破坏程度不同;污泥CST与EPS分量之间基本不符合线性相关,而非线性回归随H_2O_2添加量变化相关性排序为:100>150>200>25(单位为mg/g,以单位质量VSS计);污泥黏度总体上随m(H_2O_2)∶m(Fe~(2+))的增大而增加,而随H_2O_2添加量的增加逐渐下降,污泥CST值与黏度总体上呈显著正相关。     

污泥厌氧消化系统消化原料流变特性研究

考察了4种污泥厌氧消化原料的流变特性,研究了原料浓度、温度以及添加餐厨垃圾等因素对污泥流变特性的影响,以期为厌氧消化工艺的设计及设备选用提供基础参数.试验结果表明,脱水污泥、脱水污泥与餐厨垃圾混合物、剩余污泥、剩余污泥与餐厨垃圾混合物4种原料均为假塑性流体,且符合幂律方程.随消化原料固体浓度由1%增至10%,原料黏度升高.剩余污泥和剩余污泥与餐厨垃圾混合物在TS=3%时流变指数最大,而脱水污泥和脱水污泥与餐厨垃圾混合物在TS=5%时流变指数最大.添加餐厨垃圾可以改善污泥的流变特性,使得混合液的流变指数较纯污泥有不同程度的升高,使其更接近牛顿流体.随着温度由15℃升高到55℃,4种原料的黏度呈线性趋势降低,流变指数则逐渐升高,其中脱水污泥的黏度对温度变化最为敏感.