贵阳市区大气降水中有机酸的研究

利用ICS-90常规离子色谱结合RFC-30型淋洗液在线发生器,对贵阳市区大气降水中的小分子有机酸进行了系统研究。测得贵阳市降水中的有机酸主要以甲酸[质量分数为(0.2-4.5)×10-6]、乙酸[质量分数为(0.6-5.3)×10-6]、草酸[质量分数为(0.1-4.9)×10-6]为主,其次是乳酸和丙酮酸,及少量丙酸和甲烷磺酸;有机酸对降水自由酸平均贡献为23.2%,占总阴离子的1.4%;通过比较贵阳市区有机酸前后二十年的变化,得出现阶段可能至少有近1/2乙酸和3/4甲酸来源于人类的活动,这说明有机酸人为源是其来源的重要组成部分。     

有限空间作业人员生理状态监测设备研制

为监测有限空间作业人员异常生理状况,进而保障有限空间作业安全与作业人员生命健康,在分析手腕处6个测量位置信号质量的基础上,获得最佳信号采集位置,并结合事故成因,从光电容积脉搏波(PPG)信号中提取心率、脉搏周期、振幅等生理参数作为评价指标,研制一款针对有限空间特殊作业人群的手腕处脉动生理信息监测设备;并进行系统稳定性测...     

基于FA-BAS-ELM的海洋油气管道外腐蚀速率预测

为提高海洋油气管道外腐蚀速率预测的精度和效率,建立基于因子分析(FA)和天牛须搜索算法(BAS)的极限学习机(ELM)腐蚀速率预测模型。利用FA对影响因素数据集进行降维处理,确定预测模型的输入变量;建立ELM预测模型,并采用BAS对ELM模型的参数进行优化,避免参数取值随机性对模型预测性能的影响;以实海挂片试验为例,通过建模仿真评价模型的预测性能,并与其他模型进行对比分析。结果表明：FA-BAS-ELM预测模型的平均绝对误差(MAPE)仅为1.92%,决定系数R²高达0.994 9,相比于其他模型,该模型具有更优的预测性能。     

Policy implementation of the Republic Act (RA) No. 9003 in the Philippines: A case study of Cebu city

Municipal Solid Waste Management (MSWM) is considered to be one of the most serious environmental issues in the Philippines. The annual waste generation was estimated at 10.6 million tonnes in 2012 and this is expected to double in 2025. The Republic Act (RA) No. 9003, widely known as the Ecological Solid Waste Management Act of 2000, provides the required policy framework, institutional mechanisms and mandate to the Local Government Units (LGUs) to achieve 25% waste reduction target through establishing an integrated solid waste management plan based on the 3Rs (reduce, reuse and recycling). Although the initial impact of the LGUs is still very limited in implementing the national mandate, this article highlights the successful experiences of Cebu, the second largest city in the Philippines, in reducing its MSW generation by more than 30% in the past three years. This study also explores the implementation process, innovative actions taken by the Cebu City Government in implementing the national mandate at local level and identifies the factors that influence the policy implementation. The findings suggest that the impacts of the national mandate can be achieved if the LGUs have the high degree of political commitment, planning and development of effective local strategies in a collaborative manner to meet with local conditions, partnership building with other stakeholders, capacity development, adequate financing and incentives, and in the close monitoring and evaluation of performance.     

恐惧诉求对职业驾驶员安全驾驶态度和行为意向的影响

研究以EPPM模型作为理论框架,探讨恐惧诉求对危险驾驶行为(超速和不系安全带)态度和行为意向的作用。54名职业驾驶员在观看交通安全恐惧诉求录像后,完成安全驾驶行为问卷。回归分析表明恐惧诉求的交通事故录像能够改变驾驶员对超速及不系安全带驾驶的态度和行为意向,但作用不完全一致。恐惧情绪唤起通过恐惧情感所引发的威胁评估过程中介对不超速行为意向的影响。最后,对研究的局限和未来的研究进行讨论。     

Penicillin fermentation residue biochar as a high-performance electrode for membrane capacitive deionization

● We have provided an activated method to remove the toxicity of antibiotic residue. ● PFRB can greatly improve the salt adsorption capacity of MCDI. ● The hierarchical porous and abundant O/N-doped played the key role for the high-capacity desalination. ● A new field of reuse of penicillin fermentation residue has been developed. Membrane capacitive deionization (MCDI) is an efficient desalination technology for brine. Penicillin fermentation residue biochar (PFRB) possesses a hierarchical porous and O/N-doped structure which could serve as a high-capacity desalination electrode in the MCDI system. Under optimal conditions (electrode weight, voltage, and concentration) and a carbonization temperature of 700 °C, the maximum salt adsorption capacity of the electrode can reach 26.4 mg/g, which is higher than that of most carbon electrodes. Furthermore, the electrochemical properties of the PFRB electrode were characterized through cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) with a maximum specific capacitance of 212.18 F/g. Finally, biotoxicity tests have showed that PFRB was non-biotoxin against luminescent bacteria and the MCDI system with the PFRB electrode remained stable even after 27 adsorption–desorption cycles. This study provides a novel way to recycle penicillin residue and an electrode that can achieve excellent desalination.     

A comparative assessment of waste incinerators in the UK

The uptake in Europe of Energy from Waste (EfW) incinerator plants has increased rapidly in recent years. In the UK, 25 municipal waste incinerators with energy recovery are now in operation; however, their waste supply chains and business practices vary significantly. With over a hundred more plant developments being considered it is important to establish best business practices for ensuring efficient environmental and operational performance. By reviewing the 25 plants we identify four suitable case study plants to compare technologies (moving grate, fluidised bed and rotary kiln), plant economics and operations. Using data collected from annual reports and through interviews and site visits we provide recommendations for improving the supply chain for waste incinerators and highlight the current issues and challenges faced by the industry. We find that plants using moving grate have a high availability of 87–92%. However, compared to the fluidised bed and rotary kiln, quantities of bottom ash and emissions of hydrogen chloride and carbon monoxide are high. The uptake of integrated recycling practices, combined heat and power, and post incineration non-ferrous metal collections needs to be increased among EfW incinerators in the UK. We conclude that one of the major difficulties encountered by waste facilities is the appropriate selection of technology, capacity, site, waste suppliers and heat consumers. This study will be of particular value to EfW plant developers, government authorities and researchers working within the sector of waste management.     

Improved performance of a biomaterial-based cation exchanger for the adsorption of uranium(VI) from water and nuclear industry wastewater

The amine-modified polyhydroxyethylmethacrylate (poly(HEMA))-grafted biomaterial (tamarind fruit shell, TFS) carrying carboxyl functional groups at the chain end (PGTFS-COOH) was prepared and used as an adsorbent for the removal of uranium(VI) from water and nuclear industry wastewater. FTIR spectral analysis revealed that U(VI) ions and PGTFS-COOH formed a chelate complex. The adsorption process was relatively fast, requiring only 120 min to attain equilibrium. The adsorption kinetic data were best described by the pseudo-second-order equation. The equilibrium adsorption data were correlated with the Sips isotherm model. The maximum U(VI) ions uptake with PGTFS-COOH was estimated to be 100.79 mg/g. The complete removal of 10 mg/L U(VI) from simulated nuclear industry wastewater was achieved by 3.5 g/L PGTFS-COOH. The reusability of the adsorbent was demonstrated over 4 cycles using NaCl (1.0 M) + HCl (0.5 M) solution mixture to de-extract the U(VI). The results show that the PGTFS-COOH tested is very promising for the recovery of U(VI) from water and wastewater.