离子交换法选择性回收污泥厌氧消化液中的磷

为探讨高效选择性回收污泥厌氧消化液中磷的离子交换方法,采用静态实验和动态实验研究了4种阴离子交换树脂（D213、D202、D301和DSQ）的磷回收性能,筛选了适合富磷污泥厌氧消化液选择性磷回收的高交换容量树脂。实验结果表明,D213、D202、D301和DSQ 4种树脂对正磷浓度为70 mg/L的厌氧消化液进行动态处理时,其最大穿透体积分别为3、7、17和90 BV;DSQ树脂磷交换容量远高于其他3种树脂,达到6 860 mg P/L湿树脂,是目前报道的高磷交换容量树脂的3~4倍;DSQ树脂能有效地抵抗厌氧消化液中有机质和硫酸根等阴离子的干扰;用NaOH溶液再生DSQ树脂并回收磷,磷洗脱率超过96%,洗脱液是高浓度含磷液,可作为磷矿石的优质替代品。研究表明,DSQ树脂是一种高效选择性分离磷的树脂,适用于污泥厌氧消化液的磷回收。     

废LCD面板有机材料水热资源化产乙酸

LCD面板主要由附着偏光片及液晶等有机材料的玻璃面板构成。有机材料的去除及资源化利用是废LCD面板处理的第一步。在水热条件下对废LCD面板进行了降解产酸研究。研究考察了反应温度、反应时间、氧化剂用量、水用量及pH值等对水热产乙酸产率及选择性的影响。通过正交实验确定了水热产乙酸的最佳操作条件：反应温度325℃,反应时间5min,氧化剂（30％H2O2）0．6mL,用水量2mL,近中性环境（pH6-6．5去离子水）。此条件下,乙酸产率及选择性分别为68．83％及70．56％。结果表明,以废LCD面板有机材料为原料,采用水热技术进行产乙酸反应,可实现其资源化再利用。     

季节性城市生活垃圾成分分析及厌氧消化特性研究

城市生活垃圾的成分及特性随着季节和人类在不同季节的生活习惯而变化,针对我国北方城市研究了一年中不同季节的城市生活垃圾成分特点,对影响厌氧发酵过程的相关成分如总有机碳（TOC）、总氮（TN）、蛋白质、脂肪和还原糖等进行了测定分析。通过厌氧消化实验,测得不同季节城市生活垃圾pH值、日产气量、沼气甲烷含量、甲烷累积量、挥发性脂肪酸（VFAs）和氧化还原电位（ORP）等参数的变化规律,分析相应变化的影响因素。结果表明,二、三季度的含水率分别为64．81％和67．50％,高于一、四季度,一季度发酵原料中蛋白质和脂肪含量分别为12．56％和8．86％,明显高于其他3个季度。一季度甲烷累积量最高,达到17616mL,单位发酵原料的产气量为204．8mL／g,也是4个季度中最高的,说明蛋白质、脂肪等有机成分含量对厌氧发酵过程及结果影响比较明显。为进一步的城市生活垃圾厌氧消化制取生物燃气的工艺条件提供依据。     

利用污泥进行水体中重金属生物吸附研究现状及展望

对国内外利用废水处理等工业过程中所产生的污泥作为生物吸附剂吸附水体中重金属的研究现状进行了综述和分析,包括其预处理技术、反应机理、主要影响因素、处理效果以及反应器工艺等。同时,对该技术未来的发展趋势进行了展望,指出依托现有废水处理设施进行集约化开发将是该工艺的发展方向。     

城市生活垃圾焚烧处理过程中重金属迁移规律研究

通过采集厦门2个垃圾焚烧发电厂进厂垃圾、渗滤液、飞灰、炉渣和烟气样品,分析垃圾组成成分及各组分的重金属含量,结果表明,垃圾中以厨余、橡塑类和纸类为主,共占到垃圾干基的78．08％,重金属含量大小次序为Zn〉Cu〉Pb〉Cr〉Ni〉Cd〉Hg;垃圾渗滤液中除Zn外,其他金属的含量都较低,一厂渗滤液中重金属Ni、Zn迁移量较大,分别达到24．46％和8．52％。二厂渗滤液中重金属的迁移有相同的趋势,但含量相对较高。垃圾焚烧后其重金属主要分布在飞灰和废渣中,烟气中的含量非常少,不同金属的含量均有差别,这与金属的性质有很大关系;通过浸出毒性分析,飞灰中重金属酸溶态含量多,容易浸出,属于危险废物。同时,不同烟气处理工艺产生的飞灰的重金属浸出量有很大差别。     

Development of a risk-based index for source water protection planning, which supports the reduction of pathogens from agricultural activity entering water resources

Source water protection planning (SWPP) is an approach to prevent contamination of ground and surface water in watersheds where these resources may be abstracted for drinking or used for recreation. For SWPP the hazards within a watershed that could contribute to water contamination are identified together with the pathways that link them to the water resource. In rural areas, farms are significant potential sources of pathogens. A risk-based index can be used to support the assessment of the potential for contamination following guidelines on safety and operational efficacy of processes and practices developed as beneficial approaches to agricultural land management. Evaluation of the health risk for a target population requires knowledge of the strength of the hazard with respect to the pathogen load (massxconcentration). Manure handling and on-site wastewater treatment systems form the most important hazards, and both can comprise confined and unconfined source elements. There is also a need to understand the modification of pathogen numbers (attenuation) together with characteristics of the established pathways (surface or subsurface), which allow the movement of the contaminant species from a source to a receptor (water source). Many practices for manure management have not been fully evaluated for their impact on pathogen survival and transport in the environment. A key component is the identification of potential pathways of contaminant transport. This requires the development of a suitable digital elevation model of the watershed for surface movement and information on local groundwater aquifer systems for subsurface flows. Both require detailed soils and geological information. The pathways to surface and groundwater resources can then be identified. Details of land management, farm management practices (including animal and manure management) and agronomic practices have to be obtained, possibly from questionnaires completed by each producer within the watershed. To confirm that potential pathways are active requires some microbial source tracking. One possibility is to identify the molecular types of Escherichia coli present in each hazard on a farm. An essential part of any such index is the identification of mitigation strategies and practices that can reduce the magnitude of the hazard or block open pathways.     

Sound management of brominated flame retarded (BFR) plastics from electronic wastes: State of the art and options in Nigeria

Management of flame retarded plastics from waste electrical and electronic equipment (WEEE) has been posing a major challenge to waste management experts because of the potential environmental contamination issues especially the formation of polybrominated-dioxins and -furans (PBDD/F) during processing. In Nigeria, large quantities of electronic waste (e-waste) are currently being managed—a significant quantity of which is imported illegally as secondhand electronics. As much as 75% of these illegal imports are never reused but are rather discarded. These waste electronic devices are mostly older equipment that contains brominated flame retardants (BFRs) such as penta-brominated diphenyl ethers (PBDEs), and polybrominated biphenyls (PBBs) which are presently banned in Europe under the EU WEEE and RoHS Directives. Risk assessment studies found both to be persistent, bio-accumulative and toxic. The present management practices for waste plastics from WEEE in Nigeria, such as open burning and disposal at open dumps, creates potential for serious environmental pollution. This paper reviews the options in the environmentally sound management of waste plastics from electronic wastes. Options available include mechanical recycling, reprocessing into chemicals (chemical feedstock recycling) and energy recovery. The Creasolv^® and Centrevap^® processes, which are the outcome of the extensive research at achieving sound management of waste plastics from WEEE in Europe, are also reviewed. These are solvent-based methods of removing BFRs and they presently offer the best commercial and environmental option in the sound management of waste BFR-containing plastics. Because these developments have not been commercialized, WEEE and WEEE plastics are still being exported to developing countries. The industrial application of these processes and the development of eco-friendlier alternative flame retardants will help assure sound management of WEEE plastics.     

Using LCA to evaluate impacts and resources conservation potential of composting: A case study of the Asti District in Italy

Separate collection of municipal solid waste has overcome the 50% threshold in the Asti District in northern Italy, nearly one-third being composed of household and green organic waste. In order to address present and future solutions, it becomes therefore fundamental to assess the environmental performances of the current management of organic waste from separate collection. A from-gate-to-cradle life cycle assessment (LCA) model has been developed by expanding system boundaries, in order to carry out the assessment in the context of the whole waste management streamline. The environmental performances of an existing aerobic plant were made available, based on field measured data, by paying attention to the role and contribution of waste management subsystems. The need for actual and reliable data on materials and energy input, as well as gross and net gains from materials recovery, including benefits arising from use of compost in farming activities, was probably the major drawback that had to be faced. The study integrated the findings of different investigations from the literature with field measured data in order to obtain a more comprehensive framework representative of the area under study. The results may help public administrators to better understand the suitability of using LCA tools when dealing with solid waste management strategies.     

大件废物管理浅析

随着经济的发展和人民生活水平的改善,产品的更新换代速度也加快了,从而导致我国大件废物的产量逐年上升。本文简要概述了国内外大件废物管理的现状,通过比较发现我国大件废物管理方面存在的问题,并提出相应的对策和建议。     

Changing effluent chemistry affect survival,growth and physiological function of <Emphasis Type="Italic">Acacia nilotica</Emphasis> seedlings in northwestern region of India

Recycling and conservation efforts for water are the need of the day because of the lack of new water sources and the ever-increasing demand for drinking water. Seedlings of Acacia nilotica L. were irrigated with: canal water (T₁, control); municipal effluent (T₂); textile effluent (T₃); steel effluent (T₄); textile + municipal effluent in 1:1 ratio (T₅); steel + municipal effluent in 1:2 ratio (T₆); steel + textile in 1:2 ratio (T₈) and steel + municipal + textile in 1:2:2 ratio (T₇) with views to observe effluents effect on the seedlings and its adaptability and to recommend safe disposal of these effluents. Seedlings in T₆, T₇ and T₈ showed 50% lesser height and collar diameter than those in control. Seedlings in T₂ attained greatest height, collar diameter, numbers of branches and produced 140 g dry biomass seedling⁻¹. Highest concentration of manganese (Mn), iron (Fe), copper (Cu) and zinc (Zn) and lowest concentration of nitrogen (N), phosphorus (P), potassium (K), calcium (Ca) and magnesium (Mg) in the seedlings of T₄, T₆, T₇ and T₈ resulted in nutritional imbalance, mineral toxicity and reduction in photosynthetic (Pn) and transpiration (E) rates and caused seedling mortality. Seedlings of T₃ had highest sodium concentration and low concentration of Ca, Mg and micronutrients resulting in nutritional imbalance, augmented chlorosis and reduced gas exchange and biomass by half as compared to control. Increased growth, Pn and E and biomass in seedlings of T₅ over T₃ and survival period in T₆, T₇ and T₈ seedlings suggested a beneficial effect of effluents mixing. Unscientific disposal should be avoided and toxic concentration of metal ions␣may be reduced for long-term application and harmless disposal of effluents in afforestation and urban development.